ShopDreamUp AI ArtDreamUp
Deviation Actions
Suggested Deviants
Suggested Collections
You Might Like…
Featured in Groups
Description
Pattern I made for making a Shadow Heartless.
Important Notes:
*Please do not sell plushies made using this pattern (Giving them away is fine, however.)
*Do not repost this and try to pass it off as your own creation.
*There are no seam allowances on this pattern, so if you use normal fabric instead of felt, make sure to add allowances.
*The letters are there to help you know where to attach pieces.
*For the antennae, cut a 2 pieces of wire to stick in them so that they can be bent into the desired way.
*When the plush is completely assembled, it should be about 12" (approximately 25.5 mm) tall from tip of the antenna to the bottom of the foot.
Oh, and one more thing: If you make one of these, I'd really like to see your work!
Important Notes:
*Please do not sell plushies made using this pattern (Giving them away is fine, however.)
*Do not repost this and try to pass it off as your own creation.
*There are no seam allowances on this pattern, so if you use normal fabric instead of felt, make sure to add allowances.
*The letters are there to help you know where to attach pieces.
*For the antennae, cut a 2 pieces of wire to stick in them so that they can be bent into the desired way.
*When the plush is completely assembled, it should be about 12" (approximately 25.5 mm) tall from tip of the antenna to the bottom of the foot.
Oh, and one more thing: If you make one of these, I'd really like to see your work!
Image size
3300x2550px 948.63 KB
Make
Canon
Model
MP250 series
© 2013 - 2024 superkitten1990
Comments17
Join the community to add your comment. Already a deviant? Log In
I just wanted to let you know, Your pattern is very helpful! I'm using most of it (I did my own little thing to the antenna) to make a surprize heartless plush for a friend. I had to trace the pattern (since I didn't have a printer at the time), So my pieces are a bit smaller than what the actual sizes are supposed to be. Even so I'm so excited to finish making this little guy. Thank you for posting this pattern! <3
I'll share how it turned out once I finish! ^_^
I'll share how it turned out once I finish! ^_^