Site Header

Shop
Create a videoAI Video
anonymous's avatar
Log InJoin
Gstrat 09Kathalla on DeviantArthttps://www.deviantart.com/kathalla/art/Gstrat-09-1030862430Kathalla

Deviation Actions

Kathalla's avatar

Gstrat 09

By
Published:
374 Views

Description

Eleven coats of oil are on, and I'll be giving it another buff-down in the morning.  Meanwhile, since watching oil dry is boring, I went and did a little wiring.  Half of what's there is salvage from the semihollow LP project (two of its pots showed signs of damage from being wrestled in and were discarded), while the switch and green tone cap were taken from the kit stock pickguard and the push-pull was from spare parts.  The push-pull is wired to engage the neck pickup, presumably for use when in switch positions one or two (bridge-only and bridge/middle) to offer a total of seven pickup combinations. Due to a quirk of standard Strat wiring meant to keep the bridge pickup as loud and shrill as possible, in neck/bridge mode without the middle pickup neither tone control will have any effect.  Since that would also remove the middle pup's hum-canceling effect, I expect players to mainly use the switch to engage all three pickups at once.
Image size
2592x1944px 823.21 KB
Make
ZTE
Model
Z558VL
Shutter Speed
1/24 second
Aperture
F/2.1
Focal Length
3 mm
ISO Speed
738
Date Taken
Mar 12, 2024, 6:17:38 PM
© 2024 - 2026 Kathalla
Comments3
anonymous's avatar
Join the community to add your comment. Already a deviant? Log In
12jack12's avatar

I have a question that you might be able to help me with.  I am about to replace the 1/4 inch jack on my Ibanez guitar.  The original, very cheap, jack will not keep contact to my amp cord plugs.  When I pulled the old one out it looks like they used 26 gauge stranded wire and it's in bad condition.  What would you use to re-wire the new jack with?  Solid or stranded and what gauge would you use?