DashyProps's avatar

Arya Stark cosplay - Game of Thrones

By DashyProps
1 Favourite
0 Comments
1K Views
Photography: Myself (Rivencraft Photography) - Remotely controlled my DSLR via wi-fi + phone app.

So happy with these photos, all that work has been so worth it. :D


NEEDLE DETAILS:
• HILT: Narrow PVC pipe with wider pipe on the ends + shaped dowel inside + leather wrap w/ Angelus leather paint shading
• CROSS-GUARD + POMMEL: Sculpted with worbla; pommel has a pine base which connects/slots with the hilt dowel; worbla primed with wood glue
• BLADE: Resin cast into foamed PVC sheet (aka sintra) mold (sealed with J-Wax); fibreglass fishing rod embedded for the core; grooves sanded in;
METAL FINISH: Rub n Buff applied over a Krylon Fusion Satin Black base (wet sanded to 2000 grit)

JERKIN DETAILS:
• Created the pattern in Adobe Illustrator
• Strip material is jute webbing, original width 50mm, edges machine sewn, airbrushed with a custom mix of Createx paint
• 2mm and 3.5mm leather cord
• Edging is pleather that has been painted with Angelus leather paints (sponged on and rubbed with paper towel)
• Distressing done with sandpaper
• Hand-sewn eyelets
• Mud detailing is acrylic paint sponged on

BLOUSE DETAILS:
• Altered vintage pattern Butterick 5285
• Fabric type is unknown (no label), possibly some kind of wool blend
• Lower drawstring casing for the gathered neck is a french seam that joins the neckline to that separate piece/strip, the upper casing is just hemmed
• Distressing done with sandpaper
• Airbrushed the dirty areas with a custom mix of Createx paint
• Separate brown neck band fabric is cotton gauze

PANTS DETAILS:
• Altered pattern Butterick 5614
• Fabric: linen; fabric weight: approx. 290g/sqm / 10.2 oz)
• Distressing done with sandpaper
• Airbrushed the dirty areas with a custom mix of Createx paint

BOOTS DETAILS:
• Altered (cut) shoe base
• Cardboard patterning
• Eva foam, heat formed around toe area
• Covered with textured pleather
• Painted / weathered with Angelus leather paints
• 1mm waxed thread detailing
• Eyelets
• Leather lace

BELT DETAILS:
Steps involved:
• Bought brown belt length blank
• Cut to what I think is the right length (bit longer than V1)
• Tapered one end to a point
• Holes punched in
• Buckle slot cut
• End buckle area skived/shaved down to fit 9mm rivets
• Belt keeper/loop scored and stapled
• Edges bevelled, dyed, burnished and sealed
• Sponged on Angelus leather paint for weathered look
• Distressed it (bending, folding, etc)
IMAGE DETAILS
Image size
1365x2048px 1.02 MB
Shutter Speed
1/160 second
Aperture
F/3.2
Focal Length
50 mm
ISO Speed
320
Date Taken
Dec 23, 2015, 1:35:20 AM
Published:
© 2015 - 2020 DashyProps
Comments0
anonymous's avatar
Join the community to add your comment. Already a deviant? Log In