Shop More Submit  Join Login
More Like This BETA

Similar Deviations
Organized by Collection
Featured
:icondeviantloi:
Collection by
well, honestly, i don't know what i should write :confused:
maybe i didn't realized that i'm finally done with this model.

it takes a horrible long time to build and sometimes i was about to give up, but after more than two month (effective building time) i can share this pictures with you :)

Fazit:
the best decision was, to print the sheets on A3, because this model takes me to the limits and you should have a little bit more experience for this.
the most parts are quite easy, but some pieces are hard as hell.
you can see it in the "building process gallery"

specially the backpack was that part, that gives me more then one headache :D

but it was a challenge that I gladly accepted
because this model is really unique and definitely an eyecatcher in every shelf ore something else.

the guys from "Just Paper" did a great job on this and if they ever decide to create an other one, i would build it too ;)


IMPORTANT!!
permission for upload given through NCsoft
pls read this journal entry for more infos

the sheets are free and should remain so
pls download and use them only for personal use
otherwise i must remove them

Exteel & Sidewinder are trademarks & copyrights by NCsoft
Model created by Just Paper


to download the sheets


just click on download above ;)

-other shots-
Show
Add a Comment:
 
No comments have been added yet.

oh yeah
my first SD Gundam :boogie:

two weeks of chilled work are done
and it looks really cool :)

i was a little bit worried, because the SD Gundams have a complete different model design as the pepakura models

but after a few parts i noticed how "genius" this design is.
the most parts are open and very easy to handle.

if you have three ore four cross tweezers you can build this very quick and get a page at one day done.

also the cool thing on this models are the model parts itself.
you can remove the head and arms, the wings, the weapon and the shield and pose them in an other way.

but the important thing is the instruction
i downloaded a few other SD models but they have none
so you have to figure out which part must be connected with the others

this one comes with a very nice and detailed one, so you will have no problems and it's also a good start into the SD series :)

if you wanna try Rocky (nickname of the model) on your own
feel free and download it here [link]

P.S.
you need the backpack page 3, three times

-edit-
by the way
a big hug :hug: to :iconelengwat: Elengwat for the idea with the border :w00t:

-edit-
lol, just crazy :D
as i went online, i found a note from :iconepill: epill in my inbox about the gundam and that i don't should get mad

well, mad yes, but in a good way ;)
he made a vector picture out the photo which is just awesome.

but take a look on your own.



thx a lot man, i really appreciate that :hug:
Show
Add a Comment:
 
No comments have been added yet.

old school craft part 2 :aww:
as i saw this model, it was just a must have for me
i played worms so many times on LAN's and online
and it was always funny :)
even my own worms got bashed over the edge of the world because i throwed the holy grenade to short :D

the model itself is not hard but it got a few bugs in the back
so i just bent it in the way it look good
also the eyes have a little issue
there are two peaks, which i didn't know where i should connect them
so i just cut them away

and yes, the teeth are removable :aww:

the model is a bit small, i prefere to print this out double sized (maybe i build this again too)

again i had to put some weight into the model, otherwise it falls down

you can download the sheets here


-edit-
you're kidding me :omg:
thousand views after that short time :wow:
damn! :D
thank you all people :love: :tighthug: :heart:
Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz:

finally done
oh man, what a night :aww:
i wrote in the last journal entry that i had the feeling that i'm stuck on this
but after the entry it went into the opposite and the work goes on and on.

i doesn't took any other photos of the build because it would take more then i expected
at the end i had all parts assembled with the others
and i never cursed/sweared more then at this one :D

the only advice what i can give you is to build this very careful
start with the two front part, add this little pieces (on the same page) add the disc and curles/shells/screws/spiral flames ( :P ) and front legs
end with the tail and the last part should be the right rear leg
that's the way i build it.

again i must put some weight into one leg, beause of the tail and the sword, the model falls over.
so put something into the rear right leg before you close it.

fazit:
one of the hardest models that i had, but only because of the pieces.
there are brutal unnecessary complicated

however i'm happy that I decided to build it
it's really an awesome model
but never again :D

for download the model
click here

-edit-
1300 views and 130 faves after one week :wow:
you are nuts :D

thx to all for the responce and faves :heart:
Show
Add a Comment:
 
No comments have been added yet.

here we go
finally done :icontardboogieplz: :iconvictorydanceplz: :icondweebdanceplz:

man, this thing took just freaking long :faint:
when i imagine that the plan was, to build this in my three weeks vacation (last year :D ) and meanwhile a half year is gone since i started the boosterpack :D

ok, i had a few breaks, one with Renamon and a few others
so the pure building time was about two months
but also a long time :aww:

i have to say that i don't have any clue about Gundam Wing/00/Zero ore whatever which series is called
i know about the Gundams and love the mecha design (specially this one because of the wings) but never saw one part so don't bother about the name ;)


ah, big mechas with wings
i just love this shit :la:


even the sheets where not the best (they are very pixelized)
i'm totally pleased with the result
but during the building and right now i can say, it's definitely not a starter model
i had to modify a lot of stuff and quite every blue and grey edge is recolored to hide the folding lines
but all over is was pure fun :meow:
and...
surely not my last Gundam model ;)
the next one is allready planned

what's left to say
ah right :)
you can download the sheets here
also i wanna refer you to my building process gallery
just if you may stuck ;)

-other shots-


and a little special one here ;)
Show
Add a Comment:
 
No comments have been added yet.

desrto2k
:iconbigbigdragon:
Collection by
:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee: :hooray:

should i say something more :D
for all who followed me the last time
you can imagine how happy i am, that this gigantic project is finally done
three months (pure building time) of work are over
it was hard, it was frustrating but all in one
it was just worth :aww:

seeing her standing on my desk is just a satisfaction for all the work i put in
quite every edge is recolored to hide the white spots
i put so much soul into this project that i believe
a bit more and this model would jump right from my desk :D

but enough talking ;P
let's see what you will get here

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want :)

the package also contains the original textures

model description:
the model come on 52 pages with 520 pieces and is 60cm tall

i have to say this too
this model is hard
really hard, believe me
rate 10/10
you have to improvise a lot, so think two times if you really wanna build it :)

this time i wrote a lot of footnotes
more then usual
read them closely and you should have no problems

also
you should take a look at the building process gallery of the big sister
there are a few parts where i explain how this and that is working

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore




some word to the bloggers



you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
BioShock 2 - Bigsister - b by Destro2kBioShock 2 - Bigsister - c by Destro2kBioShock 2 - Bigsister - d by Destro2kBioShock 2 - Bigsister - e by Destro2kBioShock 2 - Bigsister - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

OLD SCHOOL CRAFT MISSION 3 - STAGE 1

old school fans know may this game too good
some may love
and some just hate it
(ore both :D )

one of the greatest score shooter but also one tough
if you don't choose the right weapon for the right situation you're just fucked :D

about the model:
i just have to say this
sometimes i have the feeling that the creator don't build there own models
some are just badly designed
but not in this case
quite the opposite
when i have to describe it, then only with one word
!genius!

this model is just genius and you just know that "Irem" build this one not only one time
everything fit just perfect

if i have to prefere a model as a starter
then this one
try it, build it
and enjoy it, this one is just great :)

you can download the model here
the power orb is also avaiable here

Overview of the Mission
Show
Add a Comment:
 
No comments have been added yet.

OLD SCHOOL CRAFT MISSION 3: SCORESHOOTER CLASSICS

STAGE 1 - R-Type (right)
STAGE 2 - Starfox (left)
STAGE 3 - Gradius (center)


this was just a must do :D
i hope you like it :)

detailed descriptions on the single photos

Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz:

finally done
oh man, what a night :aww:
i wrote in the last journal entry that i had the feeling that i'm stuck on this
but after the entry it went into the opposite and the work goes on and on.

i doesn't took any other photos of the build because it would take more then i expected
at the end i had all parts assembled with the others
and i never cursed/sweared more then at this one :D

the only advice what i can give you is to build this very careful
start with the two front part, add this little pieces (on the same page) add the disc and curles/shells/screws/spiral flames ( :P ) and front legs
end with the tail and the last part should be the right rear leg
that's the way i build it.

again i must put some weight into one leg, beause of the tail and the sword, the model falls over.
so put something into the rear right leg before you close it.

fazit:
one of the hardest models that i had, but only because of the pieces.
there are brutal unnecessary complicated

however i'm happy that I decided to build it
it's really an awesome model
but never again :D

for download the model
click here

-edit-
1300 views and 130 faves after one week :wow:
you are nuts :D

thx to all for the responce and faves :heart:
Show
Add a Comment:
 
No comments have been added yet.

a really, really cool paperpoke
the skirt was not so simple as i thought, but it works

a big hand to Carnilmo :iconcarnilmo: and Brandon :iconz8-0: for this great model :)

you can download it here
Show
Add a Comment:
 
No comments have been added yet.

Devious Collection
:iconfugamin:
Collection by
as you may know
shit take long ;P
and after the first poor and lazy try of a papercraft tutorial
i'm proudly present the second better version, where i'm gonna explain every single step what i do when i'm build a papermodel out of a 3d mesh :dance:

after meanwhile three years of papercrafting i still can say, it is one of the best hobbys i've ever had and with this little series i wanna show you
that it is not that hard as it looks :)
but also that there is much more work behind as you may know ;)


About the Tutorial:
This tutorial is ground basic
specially the first part, where i am explaining the first steps in Metasequoia
what means, it counts for beginner and also professional 3d desinger
the only thing what you should have is some knowledge in papercrafting
where you start
what is possible to build
and what not

for this tutorial i'm using Metasequoia, a great freeware 3d editor what you can download "here"
if you are allready using an other programm like 3dsmax, Lightwave or Blender, you can of course use one of these
it doesn't matter because the method is the same

i also use Photoshop but every other image editor should do the same
the only thing what you have to purchase is the "Pepakura Desinger"
because only the Viewer is free

About the 3d models:
there are a lot of model sources out there
google is your best friend here
but i will NOT explain how to receive or where you can download 3d game models
that is not the meaning of this tutorial and here starts also the illegal part
why?
to recieve 3d meshes out of games, you have mostly break or rip them and you can imagine, the most developer don't really pleased by that

but as i said, google is your best friend here ;)

ok then, enough talking
let's start with the first picture where Metasequoia is allready installed


Tutorial Overview:
Show
Add a Comment:
 
No comments have been added yet.

the second part of the Papercraft Tutorial
the major topic of this tutorial part is how to edit the mesh in the right way
creating new faces and removing the internal structure


Tutorial Overview:
Show
Add a Comment:
 
No comments have been added yet.

the third part of the Papercraft Tutorial
major topic of this part is how the decide and create simple attachments

Tutorial Overview:
Show
Add a Comment:
 
No comments have been added yet.

the fourth part of the Papercraft Tutorial
finally we are in the Pepakura Designer
here i explain the first steps, what you have to looking for
and the unfolding process

Tutorial overview:
Show
Add a Comment:
 
No comments have been added yet.

the topic of the fifth Tutorial Part is the tweaking of the allready unfolded sheets and the print settings to receive lined and lineless sheets


Tutorial Overview:
Show
Add a Comment:
 
No comments have been added yet.

Destro2k
:iconyakovzed007:
Collection by
as i started this model
i knew it will be hard and it will take long
longer as anything else before
but seriously, i never thought that it will took
over seven months to finish

and not seven months of lazyness, like the editing and unfolding process
no
seven months (4-5 hours quite daily) of pure hard work
seven months of anger, sadness, depression, distressing, love, fun and joy :w00t:

i took quite everything into this wonderfull piece
i tested out some new techniques of building
gain a lot of new experience and discovered some new crafting skills

i build into the night, rebuild the 3D model to get the stabilizators (ok, not that hard but cool technique)
and figured out how i can get a 3D effect with clear coat
what looks just cool :dance:
like this special edition artbook from CD's or DVD's

and I think I can say without inordinateness
this is my personal masterpiece :squee:

when i look at it, it was worth every freaking second
and that's it all about
building something out of nothing
with your hands
what you can be proud of
i trust me
i'm fucking proud of it :iconvictorydanceplz:
i get a huge smile everytime i came home and see it
my friends meanwhile think, i'm totally nuts because i spend so much time for it
but there mouth was falling down as they saw it :D

i just love this stuff :D
and i love :iconhaikai13: haikai13 that for, that he made this possible for me :heart: :cuddle:
that's why i don't understand why some people just release the pdo's
i mean
why I'M doing this
because I want the model

i mean it's awesome to see that other people are building your stuff
Renamon, Wargrowlmon, Yoshi, the Dead Space Marker, the Clap-Trap
you know i love you all that for
but please
you can build it after i did :D :heart:

ok, now to that what you get
with download this model
you get freaking piece of insanity
with a difficult level from 12 of 10
yeah i know
*that is not working*
but let me tell you
it is hard
really hard
hard as fu*k

so take a look at the building process gallery first
if you really want to start it

but now seriously

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are protected
so you can't edit the sheets in the designer
it has some reasons why i did it this time
i also doesn't includes the original texture

model description:
the model comes on 100 pages with over 700 pieces and is 60cm tall and 1000cm width

to download the model
click on the download link over the
"more like this" thumbs on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

also because it'S a collaboration
you have to give :iconhaikai13: haikai13 some credits too

and like always

this model is free and should it be
so let it be!



and trust me, i search for my stuff ;)

feel also free to write a critique :)

if you still have any questions
ask me anytime :w00t:
also at my facebook Profiles
www.facebook.com/dominik.kempen
or
www.facebook.com/Destro2ksCraftingbox ;P


other shots:
Avian Defender - b by Destro2kAvian Defender  - c by Destro2kAvian Defender - d by Destro2kAvian Defender  - e by Destro2kAvian Defender - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

first of all the official things ;)
"Sawsbuck is a Normal/Grass-type Generation V Pokémon. Its classification is the Seasonal Pokémon and has the abilities Chlorophyll and the new one, Sap Sipper. It changes appearance in accordance to the seasons currently present in the games. It's signature move is Horn Leech.

Sawsbuck, like its pre-evolution, resembles a fully grown deer with antlers no matter what gender it is, like reindeer (or caribou). Sawsbuck changes not its fur color, unlike Deerling, but rather changes the style of its antlers. In the spring flowers adorn them, in the summer, leaves cluster on them like trees, in fall the leaves become orange, and in winter its antlers become completely white and it gathers drifts of snow around its neck and hooves. The spots on its back also change colors with the seasons: pink in spring, green in summer, orange in fall, and white in winter. Its appearance shares a model with the Pokémon Stantler from Generation II."

original quote from pokemon.wikia.com/wiki/Sawsbuck

long time since i build a Pokemon and as :iconodnamra22: odnamra22 ask me if i would build Sawsbuck, i couldn't resist :)
to be honest i also had nothing better to do
my other stuff is still at developing ^^;

the model wasn't really hard to build
i would say 5 from 10
but it has a few flaws
do you remember the problems what i had with Renamon at this time and the square based meshes?
this model has quite the same problem
there are a few faces which have a invinsible folding line
you can't see them but you have to do them
i made a few screenshots and i hope odnamra22 is uploading them too at his blog later :)

the model itself is about 33cm high
start with the legs, the head and build to the middle
you should allready finished the horns and ears before you start the head
the fur of the chest is a seperated piece
you also can print the horn page twice and glue the flowers together ( looks better ;) )

what's left to say
to download the model just click at ultimatepapercraft.blogspot.com
Show
Add a Comment:
 
No comments have been added yet.

as i build the model
i noticed
"ok, how the .... should i add the antenna"
and i came up to that idea

i added a hole in that shape of the antenna
then i build that thing what i call bridge also with a hole in that size

i think you can guess how it is working
and it worked very well
but be sure you add the antenna before you close the upper torso ;P

the rest is just a matter of patience
add the head, build to the front and add the lower pieces of the torso one after another
Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: oh yeah
big mecha dragon :icontardboogieplz: :iconlawooplz: :dummy:
this Digimon has a long story
i had this model meanwhile since a really long time
but wasn't able again to edit the mesh
so i was again happy that this time :iconmichelcfk: MichelCFK started the work
but as i ask him when he will start with it, he told me that there is so many stuff inside the mesh, that it is impossible to build :'(
and if i could try to build it
so i started the work and i can tell you, it was more like a pain in the ass to remove the mesh and collissions :doh:
it was really confusing and i still have a lot of shitty faces in the sheets
so do not wonder that there are some triangles at the grey zone ;P

anyway, after a lot long nights i finally can give you Wargrowlmon back
i hope you like it ;)


the model itself isn't really that hard as it may look
it has just other dimensions ^^;

build the lower torso, lower arms (blades and claws) and shoulders seperated
combine the shoulders and the head with the pages 28 and 29
and continue to the chest
when you are done you can combine lower and upper torso with each other

for the other stuff
how to add the antenna or how the claws are working
please take a look at the building process gallery
i explain everything there

if you still have any questions
feel free and ask me anytime :w00t:
you can also ask me over facebook in my Profile
www.facebook.com/Destro2ksCraftingbox ;P


file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the package also includes the original texture
and a few screenshots what i used
specially for the hair :)

model description:
the model is really huge this time and comes on 47 pages with 350 pieces
and is 50cm tall, 45cm width and has also a depth with about 45cm
but the cool thing
it stands without any weight in the legs :D
i would count the difficult level this time at 7/10

to download the model
just click on download above on the right side
(i can't link the link anymore, dA generate a stupid url :( )


some word to the bloggers


you have the permission to use my photos

AND SPECIALLY TO www.mundopapercraft.com
this model is a Deviantart ->>only<<- download
so do not upload this model somewhere else


and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
Show
Add a Comment:
 
No comments have been added yet.

Featured
:iconaihara89:
Collection by
when i take a look at the little hint in description of Pegasusmon, that i wrote at that time
i never thought, that I would be the one who build myself a model of Renamon...
lol and i never thought that it would take quite one year for this :D
ok, not reall but it took me the longest time

it was pure coincidence that i found one day an image of Renamon in my messagebox also with some free resources
Renamon Turntable by KP-ShadowSquirrel

i started to edit the model but it was not "that thing"
the model was in a x-stance and i had no idea what i should do with the fur
so i stopped the work and build some others

then it also was the time i had no access to my PC and the time passed
after a while a second image pop up in my message box
Renamon Turntable Pose 7 by KP-ShadowSquirrel
and i just thought
"HOW FUCKING SWEET IS THAT !?
THAT'S IT!! :omg: :wow:


so i ask :iconkp-shadowsquirrel: KP-ShadowSquirrel, owner of both models, if he would spend....if he got a low-res version of it ^^; and then if he would spend it for a project.
so you can call this officially my second collaboration :)

i don't know but i found that 2D-3D convertions always look like ass (best example, Simpsons :D )
except one, those from nintendo
take sonic, mario, the pokemon, zelda, they really found a way to convert them

but there is also one who managed it
and in an awesome way
yes i mean you :iconkp-shadowsquirrel: KP-ShadowSquirrel ;)

this model of Rena is just super cool :dance:
and i don't say that just simply :)

the editing was not easy to remove all the clippings but after the third attempt it worked
and i can tell you people, this was just fun to build :dummy:
and the result...even i was blown away :icontardboogieplz:

the final building process was the hardest part
it took all my knowledge and techniques to combine all pieces together
holding the model until the glue is sticky
press the taps with tweezers over three edges
put the finger inside and press from the other side with something flat (sounds stupid but maybe you know what i mean :D )
so i declare this to difficult level 6 of 10

About the Fur:
well, i thought a long time what i can use for the fur
because the original mesh was not possible to build (defenitly)
so i decided to make it out of cotton wool
haha, it took me one hour to peel it in the right shape
but it was worth :)

Specifications:
in the download file you will find three pdo's
one with folding lines and texture (lined)
one with folding lines but without texture (white label)
and one without folding lines but with texture (lineless)

so you need as always the Pepakura Viewer which you can download here

the model comes on 23 pages
with 238 pieces

the file also contains a modified texture that works for the model and some color dots that i have used to prevent some texture issues

i didn't write a instruction
is hard but sorted in the way you should build it
but if you have any question either, take a look at the building process gallery ore just ask me :meow:

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore



-update-
i also uploaded now the sheets in pdf format
you can download them here

what's left?

some word to the bloggers


because this is a collab, you have to give credits to :iconkp-shadowsquirrel: KP-ShadowSquirrel too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use the renders ore screenshot of it of KP-ShadowSquirrel
except he write it here in the comments ore you ask him about it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!



and trust me, i search for my stuff ;)

if you wanna write a critique
feel free
but don't critique the model itself


ah yeah :)
:iconjyxxie:, :iconp-m-f: and :iconz8-0: (correct me if i forgot one ^^; ) started a new blog about Digimon Papercraft here
take a look and add the link to your faves, there will come some really cool stuff :w00t:

.....

and now?
Flamedramon :D


-other shots-
Renamon - b by Destro2kRenamon - c by Destro2kRenamon - e by Destro2kRenamon - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

cause a lot of member ask for this
finally here are the pdf files of the Renamon model
the file contains three pdf's
one with texture und 100% lines
one without lines and one white

pdo's and further infos here

enjoy :)
Show
Add a Comment:
 
No comments have been added yet.

in case of rebuild the big Sinanju Model from Paper-replika.com
the next part for this awesome model
The Beam-Rifle :dance:

like the Axe what i recently uploaded, it's also a redesign from the Playboy Sinanju version

the first two photos are showing the complete new scope
(just if you wonder why there are numbers missing ;) )
i build the scope that way because
well, i mean it's a rifle not a sub-machine gun :D
a rifle need a huge scope
period :D

you can also see this little scope attachment
the original plastic version has that too

i used some wires to combine the small pieces
actually the whole piece is a pipe

IMPORTANT!
to add the "shadow catchers" at the front and back
you have to try out what diameter you need
i calculated with different paperweights ;)

the third photo shows the whole model with the numbers,
just if there are still some questions about that ;)

the fourth is a few hours later with some finished parts

and finally the finished weapon :aww:

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me

IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

the first part of the big Sinanju model from paper-replika.com
and damn, i expect a lot but not that it will take so ling to build that thing

not because of the size, but i had a few problems with the pieces
frankly, they are not very good designed
maybe, i can only speak on my own because when i design and unfold the pieces i have an other way to do this ^^;

anyway, after i finished the shield i finally notice how tall this model will be and i can't wait to see it :)
but it will be a long way
Show
Add a Comment:
 
No comments have been added yet.

you maybe allready know this part

i know it's "not the original beam axe what's hidden behind the shield"
i have to say
i don't give a shit :D
all the work put into this, from the resize, redesign and recolor was just worth :dance:
but it's not only an axe, with a little special it can be morphed to a spear from 50cm to 65cm

the other thing, the original design is just really cool and totally open

when you print the pages a few times, you can build two weapons or on one side two big blades and on the other two small and waht not, it's up to the builder :meow:

but anyway
now to the morphing system
through the resize i had a little problem
the original staff is one page tall and i had to think about what to do
so i decided to cut that piece into three different and build it
like an antenna

here you can see my building process
first i build the three pipes (these are the hardest parts by the way ;) )
and cut some long paper stripes
then i wrapped one stripe arround at one side first until it fit good into the bigger pipe
you have to test it out how much you need
cut a stripe with the same lenght but don't attach it to the other side

then do the same but at the inside of one of the bigger pipes

now the system should be clear
stick the thin pipe without the attached stripe into the big pipe from the other side until you reach quite the end

then through the second bigger pipe at the side with the attached stripe at the inside

push this also quite to the end
now add the stripe at the thin pipe
and done ;P
sound complicated i know but it's really easy :)

then add the two red pieces to the staff and the top part
i allready combined them but it's up to you :)

and step by step the final axe is done :)

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me


IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

Fenrir Keyblade from Kingdom Hearts 2. Oh man, I loved this keyblade, it was like a trophy, after defeating Sephiroth I think tifa gives it to you on...Hollow Bastion? or was it Radiant Garden? I should replay the series.
Anyway, The links!

4Shared:
[link]

Megaupload:
[link]

Kingdom Hearts is ⓒ Square Enix & Disney.
Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

Other
:icongvii:
Collection by
it has been done
ladies and gentlemen
let me show you
"The Lich"
...
ayyyy :hooray:
i'm so happy and exited, this is defenitly one of my favorite models i've made so far
and it turned out so awesome
:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

and it really was about time that this is no done ^^;
i had this over a year now on my pc or rather where i ask :iconfirstkeeper: FirstKeeper for the original model
Lich.Presentation shot. by FirstKeeper

why this took so long?
just simple, i didn't had the knowledge at this point to edit 3d models in that way that it work
so i had to gain some experience first until i was ready to do this ;)

but the waiting time was worth
this is really an unique model which stands out of my normal fanart pieces
and just to clear this
even it looks like a model from WoW

this is NO fanart


this lich is designed as an OC
and because i just owe her this
i will handle it like that too
that means i will decline every suggestion from a fanart group
i hope you can understand this :)
i'm not gonna put this in some sort of suitcase
first i thought too that this something from DnD or an other RPG
but she made this model on her own
and she did just an awesome job :cuddle:
it was just a pleasure and also a honor that i had the chance to build this :w00t:

and if you say
but in this or that game there is also a lich
then you should take a look at wikipedia "what" a lich is ;)

ok, enough talking
let's see what you get here ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included
only the my from the orb

model description:
the model come on 44 pages with 301 pieces and is 45cm tall (without the pedestal)

the model is actually not hard but there are a lot tiny and special pieces
so i would say the difficult level is about 8/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)


to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers



because this is a collab, you have to give credits to :iconfirstkeeper: FirstKeeper too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use her renders ore screenshot of it
except she allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

p.s.
sry for the bad photo quality
the conditions at the moment are very bad and i didn't understand the setting of the phone camera ^^;

other shots:
The Lich - b by Destro2kThe Lich - c by Destro2kThe Lich - d by Destro2kThe Lich - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee: :hooray:

should i say something more :D
for all who followed me the last time
you can imagine how happy i am, that this gigantic project is finally done
three months (pure building time) of work are over
it was hard, it was frustrating but all in one
it was just worth :aww:

seeing her standing on my desk is just a satisfaction for all the work i put in
quite every edge is recolored to hide the white spots
i put so much soul into this project that i believe
a bit more and this model would jump right from my desk :D

but enough talking ;P
let's see what you will get here

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want :)

the package also contains the original textures

model description:
the model come on 52 pages with 520 pieces and is 60cm tall

i have to say this too
this model is hard
really hard, believe me
rate 10/10
you have to improvise a lot, so think two times if you really wanna build it :)

this time i wrote a lot of footnotes
more then usual
read them closely and you should have no problems

also
you should take a look at the building process gallery of the big sister
there are a few parts where i explain how this and that is working

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore




some word to the bloggers



you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
BioShock 2 - Bigsister - b by Destro2kBioShock 2 - Bigsister - c by Destro2kBioShock 2 - Bigsister - d by Destro2kBioShock 2 - Bigsister - e by Destro2kBioShock 2 - Bigsister - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

oh man, what a model :faint:
as great this model looks, as hard it was for me and brought me very close to through all the pieces in the trash :doh:

this is definitely no starter model and not "that you just build"
the pieces and taps are just tiny and the mechanism for the body was hell for me :D
but as a huge fan of this game
i'm really proud of it :iconvictorydanceplz:


you can download the sheets here
Show
Add a Comment:
 
No comments have been added yet.

Featured
:iconaskjoe-annthewolf:
Collection by
you know me
i just had to do this :D
Show
Add a Comment:
 
No comments have been added yet.

oh man, that took long ^^;
but finally i can show you and share the final model of Tails :dance:

before you now download the model, print and start to build it without any background informations
i have to warn you, building this model was just a pain is the ass and it was probably the hardest model i build so far :faint:
and in my case that should mean something :blushes:

even the editing was hell and meanwhile i know my job, but had i known that it would be that hard, i had edit the model much much more
there are still a few issues in the mesh but no worries, i will explain everything in the building process shots. :)

i can't really say why it was so hard, there are not much pieces or rather, not more then other model
i also cut the sheets in the best way i know, but to combine all the stuff, specially the wiskers, the chest and the tail pieces, was just ugh :doh:
maybe because this time it was just something special
the model is flying, the tail is quite the same size as the rest of the model and to find a working method to combine it with the torso took me a whole week
but hey, it is working as you can see and that's part of the job, to find and solve issues of the own models ;P

i also made a lot of photos this time, that you shouldn't have that much problems here :meow:

model description:
the model will come on 37 pages with 265 pieces and is 45cm tall
again, the model has a flying pose and will not stand anywhere
it is very hard and has a lot of weird looking pieces

the difficult level this time is 10
so don't underestimate it
and take a look at the building process gallery

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

i didn't made any pdf files yet, because with 70mb each, they are just huge :(
but maybe i find an other way to upload them :)

the package also includes original texture


if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore




some word to the bloggers


you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!






and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
Tails the Fox - b by Destro2k Tails the Fox - c by Destro2k Tails the Fox - d by Destro2k sacle test by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

3D Art
:iconcjanimal:
Collection by
and the next awesome model is done
:iconvictorydanceplz: :hooray: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

that's the reason why i just love this shit so much :D
and i just knew it would be cool :dance:

as i saw this model for, well, meanwhile also over a year ago ^^;
i just had to ask :iconsanat49: sanat49 for it
and i'm very thankfull and proud that he spend his original mesh for a papercraft project :huggle:
Crock by sanat49
the cool thing about this model is, that it's an entry for the pre-DominanceWar V competition, where i'm also a huge fan of :la:
what made this model, not the first Dominance War Papercraft, but the first downloadable (ironic hint to an other crafter ;P ) and hopefully definetly not my last ;)
...
but that's up to the 3d designer ;)


ok now, back to the model
the last steps, where you have to combine all parts will be exhausting
specially for the big shoulder armor pieces
there is not many space for glue or failures so be patience
test it out first where you can attach the pieces

also you have to put some weight into the rear leg or maybe both
maybe you noticed also that i attach the model a bit displaced at the pedestal
i had to do this because of the weight ratio
it's a lot testing and trying
so don't hurry ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included

model description:
the model come on 27 pages with 290 pieces and is 30cm tall

the model is actually not hard but the mouth take a bit more work as i thought
also the first three rings of the arms
the skulls and bones of the pedestal are very small but it's up to you if you wanna build them
i removed the lower site of the pedestal, it is too big for one page
but just glue the whole thing at a blank sheet and you have the same effect ;)

difficult level is about 7/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore


some words to the bloggers




because this is a collab, you have to give credits to :iconsanat49: sanat49 too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use his renders ore screenshot of it
except he allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)


other shots:
Crock - b by Destro2kCrock - c by Destro2kCrock - d by Destro2kCrock - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

to all my friends, watchers and visitors
happy (a little late ^^; ) valentines day :w00t:
without you i wouldn't be here :huggle:
Show
Add a Comment:
 
No comments have been added yet.

it has been done
ladies and gentlemen
let me show you
"The Lich"
...
ayyyy :hooray:
i'm so happy and exited, this is defenitly one of my favorite models i've made so far
and it turned out so awesome
:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

and it really was about time that this is no done ^^;
i had this over a year now on my pc or rather where i ask :iconfirstkeeper: FirstKeeper for the original model
Lich.Presentation shot. by FirstKeeper

why this took so long?
just simple, i didn't had the knowledge at this point to edit 3d models in that way that it work
so i had to gain some experience first until i was ready to do this ;)

but the waiting time was worth
this is really an unique model which stands out of my normal fanart pieces
and just to clear this
even it looks like a model from WoW

this is NO fanart


this lich is designed as an OC
and because i just owe her this
i will handle it like that too
that means i will decline every suggestion from a fanart group
i hope you can understand this :)
i'm not gonna put this in some sort of suitcase
first i thought too that this something from DnD or an other RPG
but she made this model on her own
and she did just an awesome job :cuddle:
it was just a pleasure and also a honor that i had the chance to build this :w00t:

and if you say
but in this or that game there is also a lich
then you should take a look at wikipedia "what" a lich is ;)

ok, enough talking
let's see what you get here ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included
only the my from the orb

model description:
the model come on 44 pages with 301 pieces and is 45cm tall (without the pedestal)

the model is actually not hard but there are a lot tiny and special pieces
so i would say the difficult level is about 8/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)


to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers



because this is a collab, you have to give credits to :iconfirstkeeper: FirstKeeper too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use her renders ore screenshot of it
except she allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

p.s.
sry for the bad photo quality
the conditions at the moment are very bad and i didn't understand the setting of the phone camera ^^;

other shots:
The Lich - b by Destro2kThe Lich - c by Destro2kThe Lich - d by Destro2kThe Lich - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

Featured
:iconlauritafranmp:
Collection by
a little special to the original model textures
based on this images from yoshi [link]

do you really think that you only get the green one ;)
you should know me better :D

all texture pieces are seperated
so you can choose also the color of the feets if you don't like it :)
Show
Add a Comment:
 
No comments have been added yet.

*it is always fascinating how the real models come over :aww: *

HE IS DONE :iconlawooplz: I CAN'T BELIEVE IT :dummy:
i have to do three crosses now :D
man, that was really a challenge to build this
not because of the big piece count and the size
but to realize it from the 3d mesh to a papermodel

i never had a more messed up mesh like this
and to edit this was just horrible
but it was totally worth, this model looks just sweet
sry if that may sound arrogant, but i just love this model :meow:
although i hate all the mario related things
yeah really in every freaking nintendo game is this plumber
i really wonder that he doesn't appear in zelda :|
maybe i'm too old and oversaturated about mario
i'm althrough more in the bad area and i think Bowser is a missunderstood individual
did you ever thought about, that he just wanna talk to Peach about his problems and stuff ;P
and maybe she is also annoyed of mario :D

anyway
even i'm not really a fan of all those mario stuff
there is one character, who i just love
yeah Yoshi
i just love (yeah twice) this little Dino :huggle:
otherwise i would have never built that model


back to real life :)
you may noticed the "CutScoreFoldandGlue" Tag in the photos
and some may wonder why i put this into them
i received the original 3d model from :iconevan3585: evan3585
one of the crew member from csfgpapercraft.com
he ask about if someone could finish it
well i took it, meanwhile over a half year ago
so "basically" it belongs to them
(even if they may deny it)

anyway
with this model i wanna thank you guys :iconthepapercraftcouple::iconevan3585: Seb and Epsilon Wolf (sry if i forgot one)
for all the stuff you build and i wanna give it you back as a little gift :huggle: :w00t:

pls don't be mad at me, that i used your logo :blushes:

*yush*
what a prologue :D
ok then, let's see what "you" get :)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want :)
(by the way, a yoshi mask should be possible
but you have to edit the mouth a bit)


the package also contains the original textures
and recolored textures for black, blue, red, orange, cyan *blah*
just look here ^^;

model description:
the model will come on 40 pages with 260 pieces and is 50cm tall
so this model should fit to the "two big mario and luigi models" from :icontouchfuzzygetdizzy: TouchFuzzyGetDizzy

(would be cool to see them all three :la: )

the model itself is easy and i sorted the pieces in that way it should be easy to build
but pls look at the "building process gallery" for some informations about special parts
even if you think you have the experience to do it alone :)

what left to say ?
if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore




some word to the bloggers



you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
Yoshi - b by Destro2kYoshi - c by Destro2kYoshi - d by Destro2kYoshi - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.