Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
NOTE:
For most people, trying to open this directly probably wont work since the file is over 14mb, so instead, left click the download button and do "save link as" in Firefox, or "save target as" in I.E.


Assembled Images

PDO's of pieces (PePaKuRa files)


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Finally! Done! My god, this one took me quite a bit longer than I had originally thought it would. Too lazy to write instructions, blah blah blah. PDO (PePaKuRa) files included to ease the pain. Yes, files, as in more than one. When I exported the model and divided it up the first time, I used an expanded view, i.e. all the pieces are distanced from their connections, so the second file is just the connected pieces for referrence... you'll see what I mean when you download it.

The final build comes out to about 11 inches (29cm) tall, 16 inches (39 cm) deep, and 13 inches (33 cm) wide, and is comprised of 17 total pages of parts.




PDF of pieces

PDO's of pieces (PePaKuRa files)




.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . . . . ./\ . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'





Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

NOTE:
This file was made with Pepakura Designer Version 3. It cannot be opened with Pepakura Designer or Viewer version 2 or lower.



> Assembled Image

> PDF of Pieces


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Riven as her BattleBunny skin from League of Legends, in papercraft form.
The model will be 10 inches tall(without the ears) and about a foot with the sword when completed. There are 141 pieces (about 15 for the sword and 10 for the costume parts) to this on 5 pages.
The template for this papercraft can be downloaded from here. :pointr: www.mediafire.com/download/kb6… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Riven © Riot Games.
Show
Add a Comment:
 
No comments have been added yet.

The papercraft template for Lux, the lady of luminosity, in her classic skin.
When finished with this, she will be at a height of 10in and about 4in wide(the pdo will say 6in, but its just because of the distance that the staff is from her), and there are 163 pieces. Be aware that there are a lot of small pieces to this model.
If you feel like making your own Lux, you can download it here. :pointr: www.mediafire.com/download/8h1… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Lux © Riot Games.

Double rainbow? What does it mean?
Show
Add a Comment:
 
No comments have been added yet.

The champion Caitlyn, the Sheriff of Piltover, shown as her classic skin, now in a papercraft template.
From boot bottom to hat top, she's 28cm(11in), and her gun alone is 20cm(8.6in) long. She is 248 pieces when you include the "extra" pieces.
If you feel like making your own, you can download it here. :pointr: www.mediafire.com/download/cl8… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Caitlyn © Riot Games.

Wanna see a hat trick?
Show
Add a Comment:
 
No comments have been added yet.

Ganon looked pretty different in the remake of Zelda 1, BS Zelda no Densetsu. I gotta say I like the design, but I think I still prefer him being blue.
Show
Add a Comment:
 
No comments have been added yet.

...I think my Tumblr Followers really like my version of Ganon for some reason...
Show
Add a Comment:
 
No comments have been added yet.

My drawing of Ganon for the "Characters" Section of my classic Zelda Tumblr.

Based a bit off his Four Swords Adventure Design, it's still esentially classic Ganon.
Show
Add a Comment:
 
No comments have been added yet.

and the next awesome model is done
:iconvictorydanceplz: :hooray: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

that's the reason why i just love this shit so much :D
and i just knew it would be cool :dance:

as i saw this model for, well, meanwhile also over a year ago ^^;
i just had to ask :iconsanat49: sanat49 for it
and i'm very thankfull and proud that he spend his original mesh for a papercraft project :huggle:
Crock by sanat49
the cool thing about this model is, that it's an entry for the pre-DominanceWar V competition, where i'm also a huge fan of :la:
what made this model, not the first Dominance War Papercraft, but the first downloadable (ironic hint to an other crafter ;P ) and hopefully definetly not my last ;)
...
but that's up to the 3d designer ;)


ok now, back to the model
the last steps, where you have to combine all parts will be exhausting
specially for the big shoulder armor pieces
there is not many space for glue or failures so be patience
test it out first where you can attach the pieces

also you have to put some weight into the rear leg or maybe both
maybe you noticed also that i attach the model a bit displaced at the pedestal
i had to do this because of the weight ratio
it's a lot testing and trying
so don't hurry ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included

model description:
the model come on 27 pages with 290 pieces and is 30cm tall

the model is actually not hard but the mouth take a bit more work as i thought
also the first three rings of the arms
the skulls and bones of the pedestal are very small but it's up to you if you wanna build them
i removed the lower site of the pedestal, it is too big for one page
but just glue the whole thing at a blank sheet and you have the same effect ;)

difficult level is about 7/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore


some words to the bloggers




because this is a collab, you have to give credits to :iconsanat49: sanat49 too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use his renders ore screenshot of it
except he allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)


other shots:
Crock - b by Destro2kCrock - c by Destro2kCrock - d by Destro2kCrock - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

playing a little bit around with Meta :D
until that point it was just a hell of a work
in the first time i ask :iconrom-stol: if he could send me some models from Dead Space after i saw his "Wodden Marker"

but there was a huge problem
the UV map was totally destroyed and i was not able to add some textures

so i had to find an other way
and as you can see, i found it ;P
and now watch out
some real big tipps here ;)

i spend the last three days to find out how to get this model
actually i search in google for some keywords like "dead space isaac clarke elite suit 3d model download" and so on
what i found was a converted model for Garry's Mod

i allready have some mdl (half-lifeČ/source) files but these files are really hard to break
until i found a little tool called "Crafty"
where you can convert the mdl files into obj files without any usage of the huge Source SDK package what the "MDLdecompiler" from Cannonfodder need.

on the same page you can find also a photoshop plugin to open the vtf texture files

i spend the rest of the time to pose the model into the right position

well, about the actual model
it's just huge
at the moment it's about 25.000 polygones :faint:
but just because of the whole attachments and little 3d details.

you may ask why i'm doing this?
because still i see no reason why i should pay some money for something what i can do on my own ;P
(and it's a little revenge to EA :D )

and as always
don't ask about when i'm done or other things
Show
Add a Comment:
 
No comments have been added yet.

after three days
sitting in front of the parts
trying, testing, connecting, disconnect, trying again and testing
i think i managed it well

this is definitely an eyecatcher
and i regret no second

the hardest part were the arms
the is no space for any moving ore posing
so, i just joined them

if you reach this point
i beg you
take your time

and use a lot of glue
yesterday, one of the legs broke, and it was hell to rejoin it on the model

start with the lower legs and kneecaps
join the upper legs in the position you want
and then the torso

you can also connect the head slightly offset
but it doesn't fit for this pose

I also omitted the weapon
i found no place for it

anyway
i'm proud of it, and this is worth more as a purchased figure.

what's about Test Type 02 (the red one from Asuka)?
i don't know
maybe someday ;)

ah, yes
here again the gallery with the building process
and the other pictures from the model


-edit-
to download the sheets, just click the [link]
Show
Add a Comment:
 
No comments have been added yet.

I finally finished my papercraft model of Kingdom Hearts 2 Sora; if you want to build one yourself, you can get the parts and instructions from my papercraft website: www.kickme.to/ninjatoes
Show
Add a Comment:
 
No comments have been added yet.

Although it has a lot of parts, it's a good build (I might be a little biased of course ;o)

The balance is a lot better than you'd expect though, and I really like the size. Not too big and not too small, and the only really small parts are the fangs, while the rest is just the right size to handle (for me at least ;o)

www.kickme.to/ninjatoes , have fun building!
Show
Add a Comment:
 
No comments have been added yet.

My Super Smash Bros. Melee adult Link paper model. You can download the templates and instructions to build your own from my website at www.kickme.to/ninjatoes
Show
Add a Comment:
 
No comments have been added yet.

A Tyranid Swarmlord from Hive Fleet Leviathan (Warhammer 40k)

Made using DoW2:Retribution resources.

The figure stands 36 cm tall. Overall 533 parts

Difficulty: Hard

Download [HERE]

Original texture and model belongs to Games Workshop and THQ/Relic.
Show
Add a Comment:
 
No comments have been added yet.

EDI from Mass Effect 3 (Alternate appearance pack DLC) with an Arc Pistol. The model is approximately scaled to Xenonray's ME2 paper models for consistency.
Overall 507 parts. Height 435mm.

Difficulty: VERY HARD
Download [HERE]

Original texture and model belongs to Bioware
Also thanks Sanek94ccol for the simplified head mesh, made my job a lot easier.


I'd like to say thanks to the creators of MEHEM (Mass Effect Happy ending mod). Thanks to MEHEM I'm finally over the utter indifference torwards the Mass Effect franchise that resulted from the atrociusly lame (personal opinion) last 10 minutes of ME3. Stay tuned for more ME characters :)
Show
Add a Comment:
 
No comments have been added yet.

Took me a lot longer that I anticipated, But here he is. Grunt from Mass Effect 2, with the biggest toy he could find in Normandy's Armory.

Approximately scaled to XenonRay's other Mass Effect models, for consistency.

Difficulty: Hard

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

Quilava papercraft.
Is so cool and it's on my monitor ^^

My attention:
Unfortunately it isn't 100% my work :(
For projecting, making parts and textures, build I only did the last one!
I'm not talented and experienced to making fully Papercraft models...
I made it for fun, training building 3D models, to have nice model ^w^ and also to tribute people who can project models.

If you want to build this model, here you can download it:

[link]

Designer of this model:
POdragon
Show
Add a Comment:
 
No comments have been added yet.

OMG!
I don't like Mudkip- it likes mud, dirty...
So why it's my favourite pokemon?
I love Mudkip...!
It's so cute ^.^

My attention:
Unfortunately it isn't 100% my work :(
For projecting, making parts and textures, build I only did the last one!
I'm not talented and experienced to making fully Papercraft models...
I made it for fun, training building 3D models, to have nice model ^w^ and also to tribute people who can project models.

If you want to build this model, here you can download it:

[link]

Designers of this model:
PMF & Skelekitty
Show
Add a Comment:
 
No comments have been added yet.

Lucario papercraft.
Aww, It's so cool ^^

My attention:
Unfortunately it isn't 100% my work :(
For projecting, making parts and textures, build I only did the last one!
I'm not talented and experienced to making fully Papercraft models...
I made it for fun, training building 3D models, to have nice model ^w^ and also to tribute people who can project models.

If you want to build this model, here you can download it:

[link]

Designer of this model:
Red Yoshi
Show
Add a Comment:
 
No comments have been added yet.

A wallpaper of the King of the Thieves
Ganon
This Picture isn't finished yet...
But Hope You Like
Show
Add a Comment:
 
No comments have been added yet.

Tali was the first Mass Effect papercraft I ever made, and at the time a rather ambitious project considering I'd mostly just done N64 and Wii models before. But things just happened to work and it made a template, that thanks to some heavy simplification of the original 3D model, worked surprisingly well. After considering the ever shrinking list of ME characters I'd like to make, and looking at some of their 3D models, I ended up deciding to work on Tali again but in her new ME3 outfit.

For the first time I've used high resolution textures for a model, from Smarteck's HD replacements for the ME3 PC version ( social.bioware.com/forum/1/top… ) and some advice concerning them from DaiShiHUN (he knows why ;P). DaiShi has also produced several Mass Effect characters, scaled to mine so check out his gallery too! ( daishihun.deviantart.com/galle… )

The textures look great and I'm very happy how the overall build has turned out as well! It's certainly harder than the ME2 version so if you are new to papercrafting then I recommend you try that version first. Built between 10th-24th June.

Below you can find the links to download the resources so you can print and build your own version!

Additional notes within the download file and on PDO/PDF #1. Any other questions, feel free to ask.

-------Read Before Downloading------

It's a 92MB RAR file which contains PDFs and PDOs to print from or use as references. ~44.0cm tall, 18 pages and at least 230 pieces including the Scimitar Shotgun.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Just search around! ;)

You can open the PDO files with Pepakura Viewer downloadable free here: www.tamasoft.co.jp/pepakura-en…

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 9/10 (More complex than the ME2 version with a greater amount of fine details)

------------------------

:pc: Download Options:
1. Mediafire: www.mediafire.com/download/ic0…
2. DeviantArt download via Stash feature: sta.sh/02acxnbw3tpu


Note: I sometimes reupload versions with minor edits so for website posters please link back to this page as a 'hub' instead or your download links could end up broken.


Happy building!
--------

Template by me, original 3D data and original textures by BioWare. HD textures by Smarteck.

--------
Other Models
Tali Papercraft Download by XenonRayMordin Papercraft Download by XenonRay Liara Papercraft Download by XenonRay Garrus Papercraft Download by XenonRay Shepard Papercraft Download by XenonRay Javik Papercraft Download by XenonRay
Show
Add a Comment:
 
No comments have been added yet.

I was thinking the other day, that I might do a group picture of all of my models I've built over the past 4 years. Most live in shoe boxes or in the wardrobe, with only my newer big ones on display. So I was quite giddy to see them all out at once.

Papercrafts, papercrafts everywhere! I don't want to guess how many sheets were used for these things, even not counting test prints and rebuilds. All I know is I've bought 3 reams of 160gsm in as many years, and an unspecified amount of 180/200gsm on top of that. Recycle your scraps and left overs kids!

For scale, the big back row ones are between 40-49cm.

Uh lets see, Back Row:
Nephenee, Haar, Lucia, Tali, Liara, Garrus, Shepard, Mordin, Midna

Back Middle: WW Floormaster, Link & Epona, Aveil, Anju, 'Endgame' Link, Saria, Prof. Shikashi, Adult Malon, Young Malon, Poe Collector, Rauru, Postman, Guru Guru, Zora v2, Zora v1, Elegy Zora, Manny.

Front Middle: Mad Scrub, Lake Scientist, Grog, Saria, Poe, Deku Guards, Skull Kid, Dead Hand, Toto, Stalchild, Elegy Link, Elegy Deku, SSB Samus.

Front Row: Hylian Shield, Mirror Shield, Hover & Iron Boots, Megaton Hammer, Master Sword, Gerudo Sword, Venomian Tank, Snowspeeder, Broken Giant's Knife, Predator Pistol, Postman's Letter, Arwing, Majora's Mask, Bolse Defence Outpost, Grog's Bag, AT-PT, Gossip Stone, Master Sword in Pedestal, Boss Key, MM and OoT Chests.

The majority are designed by me, with about 14 being other people's templates. This pic doesn't include test/fail builds or other models that have since fallen apart.
Show
Add a Comment:
 
No comments have been added yet.

This is a better high res photo of my Tali papercraft model from Mass Effect 2.

The promotional image I used for the download page here [link] was alright, but too small to show the details, which owe themselves to the lovely quality of the original textures.

So here she is standing in front of a bunch of radio equipment in my Dad's study, because that's probably the most technical looking part of our house that I could find!

Model made from 160gsm paper, stands ~44cm tall.
Show
Add a Comment:
 
No comments have been added yet.

I thought it was pretty cute. One of the easiest papercrafts I have made though, that's for sure!

Download from [link]
Show
Add a Comment:
 
No comments have been added yet.

Yay! I really love floormasters! I think this one is pretty cool. This is a floormaster from The Windwaker :D

Template on my blog: [link]
Show
Add a Comment:
 
No comments have been added yet.

A project by Pixel-Kakashi and me. Although Pixel Kakashi did most of the work, I spend the longest time on this, about 4 months. Well... Ok... it was just lying around for 4 months :P

All credits to Pixel-Kakashi for making this awesome papercraft.
You can download it here: [link]

And yes, it's lifesized.
Show
Add a Comment:
 
No comments have been added yet.