Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
The papercraft template for Lux, the lady of luminosity, in her classic skin.
When finished with this, she will be at a height of 10in and about 4in wide(the pdo will say 6in, but its just because of the distance that the staff is from her), and there are 163 pieces. Be aware that there are a lot of small pieces to this model.
If you feel like making your own Lux, you can download it here. :pointr: www.mediafire.com/download/8h1… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Lux © Riot Games.

Double rainbow? What does it mean?
Show
Add a Comment:
 
No comments have been added yet.

The champion Caitlyn, the Sheriff of Piltover, shown as her classic skin, now in a papercraft template.
From boot bottom to hat top, she's 28cm(11in), and her gun alone is 20cm(8.6in) long. She is 248 pieces when you include the "extra" pieces.
If you feel like making your own, you can download it here. :pointr: www.mediafire.com/download/cl8… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Caitlyn © Riot Games.

Wanna see a hat trick?
Show
Add a Comment:
 
No comments have been added yet.

Riven as her BattleBunny skin from League of Legends, in papercraft form.
The model will be 10 inches tall(without the ears) and about a foot with the sword when completed. There are 141 pieces (about 15 for the sword and 10 for the costume parts) to this on 5 pages.
The template for this papercraft can be downloaded from here. :pointr: www.mediafire.com/download/kb6… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Riven © Riot Games.
Show
Add a Comment:
 
No comments have been added yet.

and the next awesome model is done
:iconvictorydanceplz: :hooray: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

that's the reason why i just love this shit so much :D
and i just knew it would be cool :dance:

as i saw this model for, well, meanwhile also over a year ago ^^;
i just had to ask :iconsanat49: sanat49 for it
and i'm very thankfull and proud that he spend his original mesh for a papercraft project :huggle:
Crock by sanat49
the cool thing about this model is, that it's an entry for the pre-DominanceWar V competition, where i'm also a huge fan of :la:
what made this model, not the first Dominance War Papercraft, but the first downloadable (ironic hint to an other crafter ;P ) and hopefully definetly not my last ;)
...
but that's up to the 3d designer ;)


ok now, back to the model
the last steps, where you have to combine all parts will be exhausting
specially for the big shoulder armor pieces
there is not many space for glue or failures so be patience
test it out first where you can attach the pieces

also you have to put some weight into the rear leg or maybe both
maybe you noticed also that i attach the model a bit displaced at the pedestal
i had to do this because of the weight ratio
it's a lot testing and trying
so don't hurry ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included

model description:
the model come on 27 pages with 290 pieces and is 30cm tall

the model is actually not hard but the mouth take a bit more work as i thought
also the first three rings of the arms
the skulls and bones of the pedestal are very small but it's up to you if you wanna build them
i removed the lower site of the pedestal, it is too big for one page
but just glue the whole thing at a blank sheet and you have the same effect ;)

difficult level is about 7/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore


some words to the bloggers




because this is a collab, you have to give credits to :iconsanat49: sanat49 too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use his renders ore screenshot of it
except he allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)


other shots:
Crock - b by Destro2kCrock - c by Destro2kCrock - d by Destro2kCrock - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

oh yeah :D
this was a must build for me
i'm a great fan of this Ben10 franchise
not only because of the story, more because of the whole alien design
specially XLR8 is one of my favorites :la:
as i saw on facebook that there exist 3d models from the games
i just had to do it ^^;

sadly, the one who posted the screenshot didn't or won't :roll: react at my offer to build this model for him
with full credits like i do when i make a collaboration
well, wasn't my problem because :iconodnamra22: Odnamra send me a message with the model
so you people can thank him, that you now can download this model :dance:

thanks a lot man :huggle:
i guess you saved the day for a lot people here :)
include mine :D

editing the model took my a while, specially the hands and legs were a bit tricky
and had i knew that the model is still that hard, i had edit it a lot more :blushes:
that's why i rate this model with 9 from 10
it's really something for experts
i swear and cursed a lot, just to tell you ^^;
there are a lot of backward foldings and tiny pieces which took a lot of patience

that for, please read the "building process gallery" closely before you start
i wrote everything down what could be helpfull for you

also, you can see it, i put a thin acryl pole into the tail
the model DON'T stand on it's own
but that's shouldn't be any problem :D


model description:
the model will come on 20 pages with 188 pieces and is 45cm tall
again, the model is hard and has a lot of tiny pieces
i rate it with 9 from 10
so don't underestimate it

build the tail, head, legs, and arms seperately and combine them later


file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

also for the non windows user
three pdf files
lined, lineless and white

and the original texture

that's why it is that big this time ;)


if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore





some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
Ben10 - XLR8 - b by Destro2kBen10 - XLR8 - c by Destro2kBen10 - XLR8 - d by Destro2kBen10 - XLR8 - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

after three days
sitting in front of the parts
trying, testing, connecting, disconnect, trying again and testing
i think i managed it well

this is definitely an eyecatcher
and i regret no second

the hardest part were the arms
the is no space for any moving ore posing
so, i just joined them

if you reach this point
i beg you
take your time

and use a lot of glue
yesterday, one of the legs broke, and it was hell to rejoin it on the model

start with the lower legs and kneecaps
join the upper legs in the position you want
and then the torso

you can also connect the head slightly offset
but it doesn't fit for this pose

I also omitted the weapon
i found no place for it

anyway
i'm proud of it, and this is worth more as a purchased figure.

what's about Test Type 02 (the red one from Asuka)?
i don't know
maybe someday ;)

ah, yes
here again the gallery with the building process
and the other pictures from the model


-edit-
to download the sheets, just click the [link]
Show
Add a Comment:
 
No comments have been added yet.

This is a better high res photo of my Tali papercraft model from Mass Effect 2.

The promotional image I used for the download page here [link] was alright, but too small to show the details, which owe themselves to the lovely quality of the original textures.

So here she is standing in front of a bunch of radio equipment in my Dad's study, because that's probably the most technical looking part of our house that I could find!

Model made from 160gsm paper, stands ~44cm tall.
Show
Add a Comment:
 
No comments have been added yet.

For the past two years the focus of my large papercrafts has been Mass Effect. But having done models of my favourite squad mates I needed to turn to something else.

So I learned how to extract models and textures from Team Fortress 2, a game that has entertained me massively from mid 2008 to early 2012. I don't play it much anymore but wanted to do a tribute to my main class, the enigmatic, shambling bag of crazy that is the Pyro!

This is a papercraft template which you can download and use to print and build your very own! There's even four different hats available! He's RED by default, but if you want a BLU one, then the textures are provided so you can swap them around (see notes in download pack).

Additional info within the download file and on PDO/PDF #1. Any other questions, feel free to ask.

-------Read Before Downloading-------

It's a 35.9MB RAR file which contains PDFs and PDOs to print from or use as references. ~40cm tall, 27 pages and 259 pieces including the flamethrower and all 4 hats.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Just search around! ;)

You can open the PDO files with Pepakura Viewer downloadable free here: www.tamasoft.co.jp/pepakura-en…

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 8/10 (Large pieces, flamethrower is a chore)

------------------------

:pc: Download Options:
1. Mediafire:
www.mediafire.com/?e08ak6a01je…
2. DeviantArt download via Stash feature:
sta.sh/01dcu8x1ui67


Note: I sometimes reupload versions with minor edits so for website posters please link back to this page as a 'hub' instead or your download links could end up broken.


Happy building!
--------

Template by me, original 3D data and textures by Valve.

--------

Why yes I build other models too!
Tali Papercraft Download by XenonRay Soldier Papercraft Download by XenonRay Robert Lutece Papercraft Download by XenonRay Midna Papercraft Download by XenonRay Shepard Papercraft Download by XenonRay 


Show
Add a Comment:
 
No comments have been added yet.

Tali was the first Mass Effect papercraft I ever made, and at the time a rather ambitious project considering I'd mostly just done N64 and Wii models before. But things just happened to work and it made a template, that thanks to some heavy simplification of the original 3D model, worked surprisingly well. After considering the ever shrinking list of ME characters I'd like to make, and looking at some of their 3D models, I ended up deciding to work on Tali again but in her new ME3 outfit.

For the first time I've used high resolution textures for a model, from Smarteck's HD replacements for the ME3 PC version ( social.bioware.com/forum/1/top… ) and some advice concerning them from DaiShiHUN (he knows why ;P). DaiShi has also produced several Mass Effect characters, scaled to mine so check out his gallery too! ( daishihun.deviantart.com/galle… )

The textures look great and I'm very happy how the overall build has turned out as well! It's certainly harder than the ME2 version so if you are new to papercrafting then I recommend you try that version first. Built between 10th-24th June.

Below you can find the links to download the resources so you can print and build your own version!

Additional notes within the download file and on PDO/PDF #1. Any other questions, feel free to ask.

-------Read Before Downloading------

It's a 92MB RAR file which contains PDFs and PDOs to print from or use as references. ~44.0cm tall, 18 pages and at least 230 pieces including the Scimitar Shotgun.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Just search around! ;)

You can open the PDO files with Pepakura Viewer downloadable free here: www.tamasoft.co.jp/pepakura-en…

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 9/10 (More complex than the ME2 version with a greater amount of fine details)

------------------------

:pc: Download Options:
1. Mediafire: www.mediafire.com/download/ic0…
2. DeviantArt download via Stash feature: sta.sh/02acxnbw3tpu


Note: I sometimes reupload versions with minor edits so for website posters please link back to this page as a 'hub' instead or your download links could end up broken.


Happy building!
--------

Template by me, original 3D data and original textures by BioWare. HD textures by Smarteck.

--------
Other Models
Tali Papercraft Download by XenonRayMordin Papercraft Download by XenonRay Liara Papercraft Download by XenonRay Garrus Papercraft Download by XenonRay Shepard Papercraft Download by XenonRay Javik Papercraft Download by XenonRay
Show
Add a Comment:
 
No comments have been added yet.

Haha... Okay I wanted sooo much to draw a Gwevin kiss.
I want to see one from the show too!
I loved how the 9th panel came out ^^

Click hear for the animeted version ^^--> [link] - FROM :iconvivianaxd:



Gwen and Kevin (c) Man Of Action
Show
Add a Comment:
 
No comments have been added yet.

Gwevin!!!!!^^
I was just learning how to use the blur tool... I loved it.
Hope ya all like it^^
Kevin and Gwen (c) Man of Action
Show
Add a Comment:
 
No comments have been added yet.

Thank you :D Yayy! ^^
I wanted sooo much to draw Devlin^^ He is soo cute :D
I used some type of guide to do this artwork....
You can find it here --> [link]


Devlin, Gwen T. and Kevin Levin (c) Man of Action
Show
Add a Comment:
 
No comments have been added yet.

Hahahaha, i'll never forget this (Cindersmella) :D :D :D

Anyway i released her. You can download it either through this link

[link]

Or through my site
[link]

it's 60cm tall, 22 pages.
Show
Add a Comment:
 
No comments have been added yet.

Both Designed by :iconsabi996: aka me.

Reshiram is supposed to be taller than zekrom, so i think that the sizes are correct.

Comment please.

Also Give a llama get a llama
Show
Add a Comment:
 
No comments have been added yet.

The pidgeot I built yesterday. I think it came out pretty good, I got a little hole on the right wing, that's all.

I haven't built anything today, but tomorrow I will start building eevee ver.3 and the pidgey. I will need to buy a new shooting background, preferably blue.

Comment please, also GIVE A LLAMA GET A LLAMA
Show
Add a Comment:
 
No comments have been added yet.

I have always liked the volus, and especially Niftu Cal all doped up, being the Biotic GOD. So I've decided to make a paper model of him.

Approximately scaled to XenonRay's other Mass Effect models, for consistency.

Difficulty: Medium/Hard

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

EDI from Mass Effect 3 (Alternate appearance pack DLC) with an Arc Pistol. The model is approximately scaled to Xenonray's ME2 paper models for consistency.
Overall 507 parts. Height 435mm.

Difficulty: VERY HARD
Download [HERE]

Original texture and model belongs to Bioware
Also thanks Sanek94ccol for the simplified head mesh, made my job a lot easier.


I'd like to say thanks to the creators of MEHEM (Mass Effect Happy ending mod). Thanks to MEHEM I'm finally over the utter indifference torwards the Mass Effect franchise that resulted from the atrociusly lame (personal opinion) last 10 minutes of ME3. Stay tuned for more ME characters :)
Show
Add a Comment:
 
No comments have been added yet.

Took me a lot longer that I anticipated, But here he is. Grunt from Mass Effect 2, with the biggest toy he could find in Normandy's Armory.

Approximately scaled to XenonRay's other Mass Effect models, for consistency.

Difficulty: Hard

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

Hello there! Sumilidon from the famous tv series Medabots turned into papercraft!

Test build was made by :iconmarlous2604: and she also provided the photos! :la: Go look at her awesome gallery for more papercrafts and more photos of Sumilidon! [link]

Teamwork YAY!


The .rar contains 1 PDF of 5 pages, 1 PDO, and a text file.

Mediafire: [link]

I hope you enjoy building it!

Medabots is (c) Bee Train and the creator/directors.
Show
Add a Comment:
 
No comments have been added yet.

I've finished!. This is my version of the Sandrock Gundam Custom Edition, (from the famous anime Gundam Wing) made with paper; my first papercraft, and I hope not the last one.
(The rar inc ludes PDF and PDO files)
Thank you for watching this, and for downloading it n_n!
Here's the file uploaded in

4shared:
[link]

RapidShare:
[link]

Mediafire:
[link]

Special thanks to Krystel, Rana and Mark, three of the most amazing people I've ever met.

Wow! I didn't think this would get any fav, but I'm glad it does! It's my favorite gundam after all :D
Anyway, Thanks for the favs! they are much appreciated n_n

Gundam is ⓒ Sunrise/Bandai/Sotsu Agency
Show
Add a Comment:
 
No comments have been added yet.

Hello everyone!

Here's my design of the Medabot called Metabee. You can download it here:

[link]
The .rar contains 1 PDO, 1 PDF, and 2 text files with useful links (one in english and one in spanish)

Metabee and all Medabots are (c) Bee Train and the creator/directors.

"Viejo, soy lo mejor"
Show
Add a Comment:
 
No comments have been added yet.

NOTE:
This file was made with Pepakura Designer Version 3. It cannot be opened with Pepakura Designer or Viewer version 2 or lower.


If you can't figure out how to download this file, refer to this One-Step How-To Guide




> Assembled Image

> PDF of Pieces




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Assembled Images

PDF of pieces


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

For those that don't recognize it, this is the Needler, a Covenant weapon from the PC and Xbox series, Halo! There’s more info on the wiki page if you're really interested. Specifically, this is the Halo 1 model, but not too much changes about it throughout the series except the level of detail (and being dual-wieldable in Halo 2!) and overall size.

I've had this sitting in my incomplete folder for over a year and a half now, and with the lull I've had since finishing the Combat Shotgun, I decided to wade through that mess and see if there was anything worth salvaging. Honestly, this was more work than I was expecting it to be, I really made a mess with the geometry way back when, and putting a model together on this scale was a bit interesting at times. Eh, it was totally worth it.

I was a little torn on how to handle the needles on it. In the 1st person view, they look like a dark-purple-ish blue, but in the 3rd person, they’re a very bright pink, so I tried to find a middle ground… they came out a lot darker once I printed them though, so I guess I should have made them a good bit brighter. Oh well!

The final build came out to be ~2' 2" (~66 cm) long, ~8.5" (~22 cm) wide, and ~2' (~60 cm) tall. This actually is life-sized, honest! I took the dimensions from the halo wiki itself. Look at this picture of Capt. Keyes with one if you don't believe me, the thing is the size of his torso! Not to mention I'm only like 5'6" to begin with... As per usual, it's made entirely of plain copy paper, no cardstock included. If anyone tried building one, I would suggest cardstock for at least the inner handle if nothing else. Hmm, I think that’s it...


Oh god, I hope I’m not developing a gun fetish with all the models I’ve done lately...



> PDF of Pieces

> PePaKuRa PDO file



This is part of a series:
Needler
Activation Index
Cortana
Master Chief
Halo Ringworld






Fear the pink mist...




.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . . . . ./\ . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'






Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

This is a page from an unpublished Ben 10: Ultimate Alien story I drew for DC Comics about a year and a half ago. It was supposed to appear in Cartoon Network Action Pack, but the series was cancelled earlier this year, so this story won't likely see print.

Not sure if I'm allowed to show this or not, but what the heck? ;)
Show
Add a Comment:
 
No comments have been added yet.

This is a page from an unpublished Ben 10: Ultimate Alien story I drew for DC Comics about a year and a half ago. It was supposed to appear in Cartoon Network Action Pack, but the series was cancelled earlier this year, so this story won't likely see print.

Not sure if I'm allowed to show this or not, but what the heck? ;)
Show
Add a Comment:
 
No comments have been added yet.

This is a page from an unpublished Ben 10: Ultimate Alien story I drew for DC Comics about a year and a half ago. It was supposed to appear in Cartoon Network Action Pack, but the series was cancelled earlier this year, so this story won't likely see print.

Not sure if I'm allowed to show this or not, but what the heck? ;)
Show
Add a Comment:
 
No comments have been added yet.

ok so i forgot who but someone told me i should do some more drawing and less base and fanfic so hear it is

this was just a silly idea i had because Ampfibian can mind read :giggle: and what if ben tried to read kevin mind what would he see what els gwen or cars but i did gwen

i think ben kind of wishing he hadn't tested his power on kevin :rofl:

ok so story to this:
ben walk into the room and see kevin with this big grin and blush on his face and wounder what he is thinking so he turn into Ampfibian and read his mind to find that kevin is thinking dirty thought about gwen so grossed out he said" kevin gross stop thinking dirty thought about my cousin " and ben is thinking "eww so never going to unsee that ..."

then the shocked kevin how had no idea ben was in the room with him yells "what the hell ...stay out of my head Tennyson..... what are you doing hear anywas "
Show
Add a Comment:
 
No comments have been added yet.

page 2
[link]

i think that kevin mom ether Susen Levin or Eva Levin what ever you want to call her i bet she is going to be really crushed on learning that her son has become a mixed up mess of alien and is insane again

so this comic take place right after she has heard about it after ether max, ben or gwen has has told her
devastated she lock her self into her room staring at a photo of kevin thinking "what do i do Devin are son has once again absorbed energy and has lost him self again"

then she start to cry :cries: teardrops dripping on the photo of kevin as a child she thinks "i cant lose you a second time kevin"

then picking up a fairly new photo of kevin kissing gwen on the forehead (kevin and gwen didn't know that she was taking the picture if they had they wouldn't have kissed) she smiled a little thinking "ben & gwen im counting on you to bring kevin home safely"

i was kind of thinking of the fanfic "unconditional love" just a bit will i was doing this ^^;

i used 4 base to do this so hear they are

base 1 :iconzombie-shinju:[link]
base 2 :iconvenulsaa: [link]
base 3 :iconwatermage244: [link]
base 4 :iconbubblebases: [link]

XD :D
Show
Add a Comment:
 
No comments have been added yet.

this drawing was inspired by this vid www.youtube.com/watch?v=S9BtGL… :iconawwwplz: it made me think of how osmosains may not live to be a thousand year old but can live to be 400 years old and after i had failed so badly ^^; :iconsighingplz: on the older version of gwevin on this drawing kevs-in-love.deviantart.com/ar… i wonted to try again and show gwen and kevin still in love even after soo much time...:aww: having lived such full life's together being plumber, having kids and there kids having kids

:icongoofygrinplz: you know id have to do this but idk if i will color this or not

so in this drawing kevin is celebrating his 220th birthday with his wife gwen all his kids and grandchildren and even the newest welders of the omntrix (aka kennys daughter) and her husband , and even verdona :giggle: mostly just the people i thought would stll be alive after 220 years ^^; ya i probly could have added rook and Helen and Manny manybe a few others but i didnt think of it and plus there is only so much room i had on the page :shrug:

:star: so we have a 220 year old kev, a 219 year old gwen, adult katlin and her husband, adult aron and his prego wife, katlin twins with there wife's and kids, verdona and devlin and his wife

most of u know that i try to keep devlin out of my ua/af/ov stuff because i of my belief that gwen is not his biological mother
and no one wont to make kev look like a cheating *beep* hole but i think i thought up a way to add devlin in while making kev look not as bad it all starts with devlin mother being an alien with siren like powers that feeds of other beings energy maybe even being the female version of mikes species so in short she uses her powers to kidnap kevin away has his him obssorse energy so she make him crazy to boot so that she has more to feed on as she indulges him in every way she can but when she cant get his mind off gwen and there unborn child (aka gwen is prego with katlin) she try to distract him with another child aka she gets her self prego with devlin and deviously puts kev hands on her prego belly saying "its a boy and will name him devlin after your father" witch only sort of works
but of corse after 3 month gwen finely finds then and steel her man back
giving kevin a bit of an concussion induced amnisa in her and ben attempt to knock him unconscious so that they can get him into the domunus-lebreum machine so that they can get him sane causing him to forget the 3 mouths he had spent with her and even about devlin so that after a bit of recovery time kevin and gwen just continue there lifes where they had lifet off untill 8-11 year later when devlin show up not really knowing with real prenatal love is truly is like do to growing up with his unfeeling mom so devlin just as messed up as he is in the ken 10 ep but after spending time with kenny, katlin, and aron and seeing how there parents treat them he learns what it truly is to be loved but the desire the make his family hole agian and have his father back casue him to almost make the wrong path only to do the right thing in the end in a fight seen that would be reminiscent to the ken 10 ep where at the end of the fight devlin even throw a null void egg at his mother feet to stop her from hurting kev,gwen, ben 10k, katlin, aron and kenny and while the familys r celebrating devlin even try to slip away only to be stopped by kev who finely remember those 3 months as the 2 have a really touching seen before gwen and there 2 kids catch up to them as kev explains gwen is understanding of the snitch welcoming devlin with warm arms knowing he was the one that had thrown the null void egg saving them
and of course we got to have the seen where kenny trys to prevent his dad from putting devlin in the null void by standing in from of him only for kevin to bark "no one is throwing my son in the null void"
ben: :O_o:... son ??
*everyone tells what they know *
ben: well then *puts egg away* welcome to the family devlin
Show
Add a Comment:
 
No comments have been added yet.