Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
in case of rebuild the big Sinanju Model from Paper-replika.com
the next part for this awesome model
The Beam-Rifle :dance:

like the Axe what i recently uploaded, it's also a redesign from the Playboy Sinanju version

the first two photos are showing the complete new scope
(just if you wonder why there are numbers missing ;) )
i build the scope that way because
well, i mean it's a rifle not a sub-machine gun :D
a rifle need a huge scope
period :D

you can also see this little scope attachment
the original plastic version has that too

i used some wires to combine the small pieces
actually the whole piece is a pipe

IMPORTANT!
to add the "shadow catchers" at the front and back
you have to try out what diameter you need
i calculated with different paperweights ;)

the third photo shows the whole model with the numbers,
just if there are still some questions about that ;)

the fourth is a few hours later with some finished parts

and finally the finished weapon :aww:

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me

IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

the first part of the big Sinanju model from paper-replika.com
and damn, i expect a lot but not that it will take so ling to build that thing

not because of the size, but i had a few problems with the pieces
frankly, they are not very good designed
maybe, i can only speak on my own because when i design and unfold the pieces i have an other way to do this ^^;

anyway, after i finished the shield i finally notice how tall this model will be and i can't wait to see it :)
but it will be a long way
Show
Add a Comment:
 
No comments have been added yet.

For those of you that don't know, this is the Phurba Dagger, a three-bladed knife and key component to many of the puzzles in the relatively new PS3 game, Uncharted 2: Among Thieves. If you haven't played this or its predecessor, Uncharted: Drake's Fortune, they are both fantastic games (though the latter is a bit watered down in terms of puzzle difficulty...).

The model feels a little small overall; I tried to match it as best I could to screenshots since I couldn't find any actual dimensions, but at least everything looks proportioned pretty closely. The final build comes to ~2" (~5cm) long, ~2" (~5cm) wide, and ~12.5" (~32cm) tall. Took about a day to build; it's really not very complex. The hardest part was trying to keep the blade tip as straight as possible.

I didn't include pieces for a stand though; the one shown I quick threw together and spray-painted, but honestly it'll sit flat on its own, so you really don't need one if you don't feel like making one.





PDF of Pieces

PePaKuRa PDO's




Chloe: Oh, is that an ancient Tibetan ritual dagger in your pocket?
Nathan: Well, maybe I'm just happy to see you.






.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . ./\ . . . . . . . . . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'






Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

For those that don't recognize it, this is the Needler, a Covenant weapon from the PC and Xbox series, Halo! There’s more info on the wiki page if you're really interested. Specifically, this is the Halo 1 model, but not too much changes about it throughout the series except the level of detail (and being dual-wieldable in Halo 2!) and overall size.

I've had this sitting in my incomplete folder for over a year and a half now, and with the lull I've had since finishing the Combat Shotgun, I decided to wade through that mess and see if there was anything worth salvaging. Honestly, this was more work than I was expecting it to be, I really made a mess with the geometry way back when, and putting a model together on this scale was a bit interesting at times. Eh, it was totally worth it.

I was a little torn on how to handle the needles on it. In the 1st person view, they look like a dark-purple-ish blue, but in the 3rd person, they’re a very bright pink, so I tried to find a middle ground… they came out a lot darker once I printed them though, so I guess I should have made them a good bit brighter. Oh well!

The final build came out to be ~2' 2" (~66 cm) long, ~8.5" (~22 cm) wide, and ~2' (~60 cm) tall. This actually is life-sized, honest! I took the dimensions from the halo wiki itself. Look at this picture of Capt. Keyes with one if you don't believe me, the thing is the size of his torso! Not to mention I'm only like 5'6" to begin with... As per usual, it's made entirely of plain copy paper, no cardstock included. If anyone tried building one, I would suggest cardstock for at least the inner handle if nothing else. Hmm, I think that’s it...


Oh god, I hope I’m not developing a gun fetish with all the models I’ve done lately...



> PDF of Pieces

> PePaKuRa PDO file



This is part of a series:
Needler
Activation Index
Cortana
Master Chief
Halo Ringworld






Fear the pink mist...




.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . . . . ./\ . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'






Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Alright! This was a fun one! Look how friggen' big it is! Well, if nothing else, it is a personal record, especially since it's entirely regular printer paper, no cardstock used at all. Ahhh, I so wish I had owned a sketchy hockey mask to wear in that last picture of me holding it.

It's the Combat Shotgun! This is another weapon from my ever-growing series of models from Fallout 3, a PC, 360, & PS3 game. You can read more about it on the wiki page I linked if you want, I'm too lazy to go into more detail than that ;).

My final build came out to be ~2' 8.5" (~82.6 cm) long :D, ~6" (~15 cm) wide, and ~7" (~18 cm) tall. Unlike the Laser Pistol and Alien Blaster, I decided to fix the scaling, making it closer to true "life-sized", since the difference would probably have been more significant given the overall size of it... Also, there's no stand included in the parts. I built the little rack shown as an afterthought when I realized, "Ok, now what do I do with it?" Ooo! Maybe I'll try to find a real gun rack! Hah, that'd be creepy.

I hope the irony of this isn't lost on any of you... making a model of a (mostly) wooden object out of paper... I'm entertained waay too easily.

You know, when I originally thought of doing a model from Fallout 3, I wanted to do Liberty Prime. I borrowed my friend's copy of the PC version, ripped the enormous mesh file, and found a tool to extract individual meshes. But one look at that model had me thinking yea, that's going on the back burner, let's start with something a little simpler.

I'll get to it eventually!.. probably... maybe... hopefully..?





> PDF of Pieces

> PePaKuRa PDO file



This is part of a series:
Fallout 3 Ammo
Combat Shotgun
Alien Blaster
AEP7 Laser Pistol






.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . . . . . . . /\. . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'





Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

The template for this is a available here:
[link]

Other images:
[link]
[link]

I built Clu's light cycle on cardstock. The fold lines were covered over with Crayola washable markers which makes an *enormous* difference in the quality of the end result.

This papercraft has the worst instructions ever. If you decide to do this one:
* Don't make this your first one. Start with the recognizer.
* You need a utility knife for the inside cuts. I had success with Elmer's glue, a paper towel, and many toothpicks. I recommend using the toothpicks to spread the glue evenly, and to wipe off places where it spooges. A glue stick will work but they are very large and imprecise.
* Have a gray and a black marker handy. A Sharpie doesn't have the right sheen. Use this to go over the dotted-lines when you are done.
* Keep this final picture handy while building. During assembly the parts are abstract.
* There's lots of parts that just really don't fit. You have to mush and bend them together. This one takes a lot of time. I probably spent 10 hours on it all together, and I had to get my wife's perspective at times to see other ways something might fit.

Changes to the instructions:
* Mark which wheel is front -vs- back and don't forget mix them up.
* If possible, use paper that is black on the back. Or run it through your printer again and print black on the other side. There are places where the white paper shows and this will minimize the amount of marker you need to use to cover it up.
* Build both wheels then glue them to the chassis. I recommend doing this before cutting/folding the other parts. You could even stop at that point if you just like the cycle alone.

Wheels:
* Those thin white lines on the wheels are the slits for the driver's arms and legs that are referenced in step 8. Cut them with a utility knife before gluing anything. It is tough to do later on.
* Don't fold the A-I tabs around the wheels, or if you do, don't fold them in very much. You need them to be rigid so that they push against the other darker colored tabs that you glue them to.
* The designers don't know alphabetical order. *facepalm* Ignore that and just go around the wheel from A to I. This is where I started to lose confidence in this design...
* It is tough to see where exactly to attach the wheels to the chassis and what orientation to use. Line it up before gluing. The light cycle should sit level when the wheels are attached.
- The wheel has 10 sections. I'll call the bottom "section 1" and they count clockwise from there up to section 10.
- Orient them: the bottom of the wheel has a circle on it, made from black and blue stripes.
- Start glugin the the back wheel at section 4.
- For the front wheel, the dots are on section 6, 7, 8, 9, and 10. So the bottom has no dot.
- Glue the front wheel at section 8

Undercarriage piece:
* This piece is a very convoluded way to hide the ugliness between the front wheel and the chassis. Unfortunately, it covers lots of nice detail and is really hard to line-up. Maybe a better way is to not put this on at all.
* Line this up so that it covers the dots on the wheels. Get it all lined up before gluing anything.

Clu's back:
* Put the feet into the slits and don't glue anything yet. I glued the center "B" tab only, and I did it as the very very last thing once everything else was together. Otherwise this piece just keeps getting in the way, especially when gluing the helmet.
* Clu really doesn't have much of a neck...

Arms:
* First, fold these in half and glue them together.
* Next, insert the gray handles into the slits in the wheels. Shove them most of the way in.
* Then glue them onto the cycle, near what I call the front windshield. The instructions call this Clu's shoulder, but you are really gluing it to the chassis not the driver. You can fold the tab to glue it onto the front, or the side. I recommend the side so that it does not interfere with the helmet. Maybe a better way would be to cut a slit and put it into there so it doesn't cover the detail on the side.

Fin:
* The fin probably isn't worth doing.
* Cut out the white area with a utility knife.
* The order of instructions on step 11 is wrong. First fold over the dotted line to make the two "wings" THEN fold over the yellow line. Don't glue it yet. Done properly, it will look like airplane wings with a bottom piece. Make sure you fold the tabs out before you glue it together.
* I cut-off the lighter colored tabs because they didn't line-up with Clu's back. Just glue the bottom part to the wheel.
Show
Add a Comment:
 
No comments have been added yet.

my second attempt at papercraft.would like to revisit some day now that i have learned a few things. used mostly superglue and house is uneven.
Show
Add a Comment:
 
No comments have been added yet.

"From hell's heart, I stab at thee. For hate's sake, I spit my last breath at thee." that pretty much how i felt building this thing. out of all the papercraft i have built, this one gave me the most trouble. the biggest problem was me. i am a perfectionist and well in the end its paper and it cant be perfect. but there was a few tricks that i learned to help me. the key was not following directions,taking a step back and and trying it my way. i wont bore you with the details but it included cutting off tabs and adding some.if you attempt this and want to know what i did ill send you some notes. man once i got that saucer section together, it was clear sailing.this one might go to a friend because i think i can now do one much better. also note, that is a stand that came with the kit. i threw it together in like 2 mins. if the weathers good ill make it a wall mount. KHAAANNNN... KHAAANNNN!

head over to [link] for this and other cool papercraft projects.
Show
Add a Comment:
 
No comments have been added yet.

my finished papercraft AT-ST scout walker. i thought these things were the coolest thing ever when i saw return of the Jedi, when i was a kid. construction took about the time it took me to watch season two of star trek DS9(you do the math lol) overall good build and little extra was needed. the only thing i did add was a nickle and three penny's to each foot. at least i know that its worth at least 16 cents.with the added weight he will stand all on his own. i tried to use a light blue marker on some parts, but it bleed too much so i went with my old stand by, black. in the end i didn't use dowels for the canons and rolled the paper(witch i hate!). i felt that if i had cheated i would never let myself live with it. i didn't glue the head , so he will look in different directions. gotta thank [link] for the awesome template.
Show
Add a Comment:
 
No comments have been added yet.

This is a Non-Specific Pistol with some moving parts (slide, safety, mag). Assemble it like an ordinary papercraft.

I made it for /po/ as an experiment in designing an intermediate-detail pistol model.

Dimensions:
Length: 6.75" or 17.5 cm
Height: 5" or 12.75 cm
Width: 1.25" or 3.25 cm
Barrel Length: 4.25" or 10.9 cm

Download Link (Mediafire)

As of 2013, the V2 iteration of this model is available, replacing the handmade patterns with digital ones and moving the breech component from the frame to the slide. It's available in black and stainless colors.
Show
Add a Comment:
 
No comments have been added yet.

Just a quick accessory in between projects.

Although the NSP's barrel wouldn't logically handle a suppressor, here's one anyway. It's a series of tubes that slides over the barrel.

Download Link (Mediafire)

The pistol itself is available here (black) or here (stainless).
Show
Add a Comment:
 
No comments have been added yet.

Package includes:
- Cover Page
- Patterns for metal parts & grip (22 png files)
- Patterns for wooden parts (7 png files) in 4 color variations.
- Plain white patterns (29 png files)
- Instructions (48 jpg files & 2 txt files)

Complete Package Download (Mediafire, .7z)

Complete Package Download (Mediafire, .zip)

PDF Version (Patterns only, normal colors, Mediafire, .zip)

Standalone Instructions, if you're using the PDF, for example (Mediafire, .zip)
Show
Add a Comment:
 
No comments have been added yet.

A little papercraft to get again into papercrafting again since I now have the time for it :)

The next ones will be bigger projects
Show
Add a Comment:
 
No comments have been added yet.

A nice papercraft from Rokusho ^^ I really like how it turned out and it's a well made design.

I used to watch this serie as a child. Good memories.

Papercraft made by me
Papercraft designed by :iconstorml:
Show
Add a Comment:
 
No comments have been added yet.

This model was fun to make and looks really good. The hands were a little bit hard to make but that makes it more challenging :)

This model is designed by :iconstorml: and I did the testbuilding ^^ ( He is also testing the model)
Show
Add a Comment:
 
No comments have been added yet.

Now you can see some of those white parts! ;o)

So far the assembly is going very well, hopefully that will go for the rest of the parts too! ;o)

Stay tuned!
Show
Add a Comment:
 
No comments have been added yet.

I didn't like the way the version with the ridges turned out, so in the final version, the bow will have a simple, basic riser (handle).

I'll change a few more small things on the bow, and then I'll unfold it as the last part for my new LEGO Forestman papercraft minifig! ;o)

Stay tuned!
Show
Add a Comment:
 
No comments have been added yet.

Sure, it's still missing some important parts (a.k.a. the wings...) but so far, my hand drawn papercraft TIE-fighter is coming along very nicely! ;o)
Show
Add a Comment:
 
No comments have been added yet.

Two 1:2 scale paper models of the Triangle of Light from the 2001 movie, "Lara Croft: Tomb Raider". The template for each may be downloaded here --> [link]
Show
Add a Comment:
 
No comments have been added yet.

My third Star Wars papercraft creation! :yoda: The template may be downloaded here: [link]
Show
Add a Comment:
 
No comments have been added yet.

A 37" (95 cm) long paper model of Auron's sword as it appears in the Kingdom Hearts 2 video game. The template is available here --> [link]
Show
Add a Comment:
 
No comments have been added yet.

More Models
Military: [link]
Popular Culture: [link]
Steampunk: [link]
Real Space: [link]
Ponies: [link]

Bloggers, you can find a preview image here

--

This was done as a request by Charles Davenport from papermodelers.com.

Yeah, dunno what else to say about this; it's a full scale M24 grenade with removable charge. Don't take it to the airport.

UPDATE: Uhh, just noticed a few typos my sleep-deprived brain failed to pick up yesterday. I'll fix those and add a Splittering sleeve sometime within the week, hopefully.
Show
Add a Comment:
 
No comments have been added yet.

More Models
Military
Popular Culture
Steampunk
Real Space
Ponies

Preview image here .

--

So, to celebrate Doctor Who coming back today, here's an updated version of the TARDIS I did a few months ago, this time depicting the Eleventh Doctor's TARDIS.

Also, I added tabs. Yes. Tabs.
Show
Add a Comment:
 
No comments have been added yet.

Show
Add a Comment:
 
No comments have been added yet.

Tank, Cruiser, Mk VIII, Cromwell (A27M), and the related Centaur (A27L) tank, were one of the most successful series of cruiser tanks fielded by Britain in the Second World War. The Cromwell tank, named after the English Civil War leader Oliver Cromwell, was the first tank put into service by the British to combine a dual-purpose gun, high speed from the powerful and reliable Meteor engine, and reasonable armour, all in one balanced package. Its design formed the basis of the Comet tank.

A little break from my Me-262 project, a cromwell tank from JSC no. 722, the kit also includes Daimler Dingo Mk.I and Dodge WC-51, as well as optional turret to build A30 Challenger

14 workhours, scale 1/100, length 6.35 cm. The barrel was built with technique from very kind :icon404bot:
Show
Add a Comment:
 
No comments have been added yet.

Zio prudenziati's Albatros D.V in 1/148 (British N-scale) [link]

The model is supposed to be just a simple wargaming stuff, but i got a lil' bit carried away with this :p the fuel line and exhaust were made from 0,5 mm wire and the rigging, which took ages to build, made from even thinner wire

Just additional info, this D.V was flown by Lt. Hans-joachim von hippel, commanding officer of jagdstaffel (jasta) 5. Von Hippel survived both great war, and was still giving interviews in the 1970s. He is at least as famous for flying the DV marked with the fire breathing dragon (this model) as he is for flying his pair of Blitz marked D.Va machines, one with lozenge camo wings and the other with green/mauve. His hair raising combat of February 18, 1918, in which the dragon lost a lower wing, is widely known and resulted in a unique photo of the crashed DV, upside down but apparently otherwise intact.
Show
Add a Comment:
 
No comments have been added yet.