Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
in case of rebuild the big Sinanju Model from Paper-replika.com
the next part for this awesome model
The Beam-Rifle :dance:

like the Axe what i recently uploaded, it's also a redesign from the Playboy Sinanju version

the first two photos are showing the complete new scope
(just if you wonder why there are numbers missing ;) )
i build the scope that way because
well, i mean it's a rifle not a sub-machine gun :D
a rifle need a huge scope
period :D

you can also see this little scope attachment
the original plastic version has that too

i used some wires to combine the small pieces
actually the whole piece is a pipe

IMPORTANT!
to add the "shadow catchers" at the front and back
you have to try out what diameter you need
i calculated with different paperweights ;)

the third photo shows the whole model with the numbers,
just if there are still some questions about that ;)

the fourth is a few hours later with some finished parts

and finally the finished weapon :aww:

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me

IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

you maybe allready know this part

i know it's "not the original beam axe what's hidden behind the shield"
i have to say
i don't give a shit :D
all the work put into this, from the resize, redesign and recolor was just worth :dance:
but it's not only an axe, with a little special it can be morphed to a spear from 50cm to 65cm

the other thing, the original design is just really cool and totally open

when you print the pages a few times, you can build two weapons or on one side two big blades and on the other two small and waht not, it's up to the builder :meow:

but anyway
now to the morphing system
through the resize i had a little problem
the original staff is one page tall and i had to think about what to do
so i decided to cut that piece into three different and build it
like an antenna

here you can see my building process
first i build the three pipes (these are the hardest parts by the way ;) )
and cut some long paper stripes
then i wrapped one stripe arround at one side first until it fit good into the bigger pipe
you have to test it out how much you need
cut a stripe with the same lenght but don't attach it to the other side

then do the same but at the inside of one of the bigger pipes

now the system should be clear
stick the thin pipe without the attached stripe into the big pipe from the other side until you reach quite the end

then through the second bigger pipe at the side with the attached stripe at the inside

push this also quite to the end
now add the stripe at the thin pipe
and done ;P
sound complicated i know but it's really easy :)

then add the two red pieces to the staff and the top part
i allready combined them but it's up to you :)

and step by step the final axe is done :)

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me


IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

This is the FSMG-12 Raptor. Also known as the buzzard to the Zygotian military. This is a Symbiotian unit thats tasked with a combination of ground and air roles. Its integrated flying packs keep the GA flight capable while external and internal hard points keep the Raptor well equipped for any situation. It's main weapons consist of a variety of arm mounted armament; such as the retractable claw pictured above. The claws unique ability of being able to fold out and then be "thrown" makes this the best medium/and CQC weapon available for this GA. When thrown it has a pair of thrusters that are attached to the base of the blade propelling the blades forward, while the thruster's thrust-vectoring capabilities and fins keep it stable in flight. It's reeled in by a tow cable attached to the weapon and the arm-mounting platform. It's size and weight allow the Raptor to have a range of about 2000 miles and the top speeds tend to be around the sub sonic areas. But pilots have been known to modify and equip the Raptors with stronger thrusters and flight units so that they have a range closer to 2.5k miles and break the sound barrier. this is the primary unit of the Symbiotian Air Force.

Performance:
Land- 50 MPH
Air- 600 MPH (With a range of 2000 miles) (When modified: 900 MPH with a range of 2500 miles)
Marine- None (sinks)
Show
Add a Comment:
 
No comments have been added yet.

The SG-01 Road Runner aka the chicken, is the lightweight battle GA employed by the Symbiotian military. Its armless design wasconsidered a little unorthodox during the introduction but the speed made up for the loss of function. It's wing booms act as stabilizers and the tail has a integral gyroscope to keep it upright, even during extreme maneuvers. The booms can be switched out for different weapons including gun pods, mortars, rocket pods, blades, and thruster packs. The main cockpit is located within the main body protecting the pilot within, but the gunner's station happens to be exposed. creating a dilemma when the gunner is killed it leaves the pilot defenseless against the enemy's attack, although the unit's speed and petite size does well to defend the unit from larger and more powerful units. This unit is the most potent when it is used in packs, but is very well used by single gun squads as a heavy gunner unit.

Performance:
Land- 120~MPH
Air- 300~ MPH (faster depending on which thruster packs are equipped.
Marine- none (wading only)
Show
Add a Comment:
 
No comments have been added yet.

The PGA-02 Undine is another experimental GA in use with the Zenith Squadron. It is another well rounded fighting unit such as the PGA-01 [link] but minus the load of experimental weaponry and a surplus of practical modifications. such as extended thruster bays on the flight pack and added internal missile bays. The Undine is usually fitted with a sniper modification to its universal GA battle rifle and a folding tactical fixed to its left arm. The Undine features a fixed AI system much like the one fitted on the PGA-01 for enhanced combat capabilities. However unlike the Azure, the undine's archetypical frame is the I/X-07 [link] giving this unit a more stealthy cross section than the Azure.
Show
Add a Comment:
 
No comments have been added yet.

If you still remember those old video storage devices, you can work out the size of my new papercraft Star Wars TIE-fighter! ;o)

Although I'm a big sci-fi fan, this is actually the first Star Wars papercraft model I made myself!

I drew all the parts by hand, and coloured it using aquarel, which makes it look really nice I think. ;o)

I also made an interior for the command pod, and although most of it really just stems from my imagination, I really like the way it turned out. ;o)

The wings can be removed for easy storage, but you can also permanently glue them to the pylons if you want to of course.

Parts and instructions to build your own papercraft TIE-fighter are available from the new Star Wars section on my papercraft webpage: [link]

Have fun building!
Show
Add a Comment:
 
No comments have been added yet.

Space.
The final frontier.

These are the voyages of the starship Enterprise.

It's continuing mission: to explore strange new worlds;
To seek out new life and new civilizations.

To boldly go where no one has gone before!


It's the starship from captain Jean-Luc Picard from Star Trek: The Next Generation! ;o)

I made it a few years back already, parts and instructions to build it yourself are available from my papercraft webpage: [link]

Have fun building!
Show
Add a Comment:
 
No comments have been added yet.

The first test build of the papercraft Legend of Zelda: Ocarina of Time adult Link (Menu Link) I'm working on: [link]

The guard is a bit tricky, but nothing too difficult if you take the time to properly score and fold all the fold lines.
Show
Add a Comment:
 
No comments have been added yet.

Just easy Finneon :D

Will be released soon on [link]
as soon as :iconpaperpokes: wants
Show
Add a Comment:
 
No comments have been added yet.

As you see ~ It is remoraid

Will be ready in [link] whenever we want HAHAHAHA
Show
Add a Comment:
 
No comments have been added yet.

Just another lumineon :D

Will be released soon on [link] as soon as:iconpaperpokes: wants

P/s: you will see I will submit a lot today, and rest for the whole KAKAKAKA
Show
Add a Comment:
 
No comments have been added yet.

If you would like to have a gauntlet like this they are available on Etsy! www.etsy.com/listing/125835555…


I made this gauntlet as a personal project for the Steam and Cinders Winter Feast tech contest. The hand and wrist are articulated allowing me to retain my full range of motion. The purple sections are translucent and will have LEDs added to them in the near future causing them to glow an eerie dim purple.

Now that this gauntlet is done I am thinking it is time to start making more gauntlets with hand coverage and maybe start working towards articulated fingers.


The bracer is made from 8 oz veg tanned leather, sheet brass, brass rivets, brass studs, ecoflo dyes and finishing products.

Also! You should visit me on Facebook! www.facebook.com/SteamViking

Want your own custom gauntlet?  Visit me on Etsy! www.etsy.com/listing/210585927…
Show
Add a Comment:
 
No comments have been added yet.

This pauldron was made a while back when I had just started getting into leather working for a friend who needed armor for the larp we go to. One day, I'd like to take another stab at it and see if I cant make it look a little more refined.

It is made from veg tanned leather, water hardened and dyed. The armor is articulated to allow for full arm movement through the use of 3 straps on the inside that hold the whole thing together
Show
Add a Comment:
 
No comments have been added yet.

These bracers were made as a commission for my friend James, who just recently got into larping, and plays a ranger style character.

These bracers were made from 5-6 oz veg tanned leather, and dyed, treated and sealed using various wonderful things from the Tandy Leather Store outlet.
Show
Add a Comment:
 
No comments have been added yet.

original design
Show
Add a Comment:
 
No comments have been added yet.

Mk-V
Show
Add a Comment:
 
No comments have been added yet.

-v-
Show
Add a Comment:
 
No comments have been added yet.

After months of procrastination, I finally took pictures of this chilly bird.

This outstanding pose was edited by :iconjyxxie: or POdragon!
Not an easy build, full of small parts. It looks amazing hanging on my shelf, though ^^

There will probably be a standing pose too.

Some day on :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

So, this is the first time Sceptile is actually showing (completely) on a photo!!

I had a really good time building these guys, Sceptile is the easiest, followed by Swampert and mother-f** Blaziken (ok just that hair thing).

The three of them scale pretty good, though my Blaziken is a little bigger then the one on the blog.

Blaze [link] and Swamp [link] are already posted, Sceptile will be out someday :D

All the models were edited by :iconz8-0: , and you can only find these Amazing models on :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Updating after a long absence. Torterra' been ready for a while, but I still haven't found the right scenario for a pic, so this will do. One of the coolest poké I ever thought I'd build. Helping building tips are found in my journal. Thanks a lot to paperpokes team, specially Brandon and PMF, who made Torterra survive some sort of computer crash!

That tree just asked for a pokémon on it. I'm so glad my Pikachu has a proper size, yay ^^.
Show
Add a Comment:
 
No comments have been added yet.

These are Barbie scale Warhol Brillo Boxes built out of cardstock. Silly me. ;) Build some for yourself --> [link]
Show
Add a Comment:
 
No comments have been added yet.

A 1:1 scale paper model of a Mk2 grenade from the Half-Life 1 video game. The template may be downloaded here. --> [link]
Show
Add a Comment:
 
No comments have been added yet.

This is a full scale papercraft Dream Sword from the Kingdom Hearts 2 video game. A download of the template is available here --> [link]
Show
Add a Comment:
 
No comments have been added yet.

機動戦士ガンダムSEED C.E.73 DELTA ASTRAY.

MMF-JG73L TURN DELTA GUNDAM.

Software: 3dsmax.

Render: Brazil r/s.

Texture: Photoshop cs.

Polygonal: 84122
Show
Add a Comment:
 
No comments have been added yet.

GNY-001F GUNDAM ASTRAEA TYPE-F & GNY-002F GUNDAM SADALSUUD TYPE-F
---------------------------------------------------------
Software: 3dsmax; Brazil_r/s;
Texture: photoshop cs;
---------------------------------------------------------
MORE: [link]
Show
Add a Comment:
 
No comments have been added yet.

《3DGUNDAM PROJECT SPECIAL.1》

MORE: [link]

BBS: WWW.3DGUNDAM.COM

*: Forbid Reprinted
Show
Add a Comment:
 
No comments have been added yet.

You have no idea how hard it was to make this picture.

1. The frickin crafts are ENORMOUS!
2. there's not a big enough piece of paper to make them both fit

I had to get o pieces of each color, and put them both together to get the background.

Nevermind that, i need to scale these down anyways. They are too big.

Both of these designed and built by :iconsabi996: AKA me :P

Will be released sometime on [link]

Please check out my first made from scratch video [link]

Also please comment :D ....
Show
Add a Comment:
 
No comments have been added yet.

You already saw previews of jolteon and flareon, but now all three are finished.

All four designed and built by :iconsabi996: AKA Me :P

Let's see: the most difficult parts were: flareon's tail, jolteon's mane, Eevee's fur, and vaporeon is as simple as they come.

They are probably in scale.

Plz check out my first made from scratch video : [link]

These will be available on [link]
Show
Add a Comment:
 
No comments have been added yet.

The Flareon i started a while ago, i just changed the pose a little bit. It's a 10 pager, it's probably in scale with eevee.

I already have it printed, and jolteon is halfway edited now.

Will be available sometime on [link]

Please comment :D
Show
Add a Comment:
 
No comments have been added yet.