Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
I have finished to build my Spyro papercraft.
This is the download [link]
For instructions this is the [link]
For only the pdf this is the [link]
Show
Add a Comment:
 
No comments have been added yet.

Finally I have finished to build this amazing papercraft!
Designed by Chamoo232
Show
Add a Comment:
 
No comments have been added yet.

Rattly the rattlesnake from Donkey Kong country 2
Designed and built by me.
This is the download [link]
If you build it put a weight on the tail (piece 36 or 37) before closing the model, to make it stand
Show
Add a Comment:
 
No comments have been added yet.

Not difficult overall but a few parts, the "hair" and the outstretched wing, are somewhat difficult.

Designed/edited by :iconz8-0:.

Look for it sometime at Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

It probably goes without saying that this guy difficult. But if you're willing to put in the time and effort the results are great.

Thanks to :iconz8-0: for letting me build it.

Look for it sometime at Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

This has taken me far too long to finish but I did have to build it multiple times. The first one I built ended up getting crushed and I screwed up the second one by attaching a part on wrong.

So, finally, here is Muk. Designed/edited by :iconz8-0:.

Template available sometime on Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

What can I say? Amazing how :iconz8-0: can edit papercraft ^^!

Scyther is a very different and cool pokémon. I really like this build and the pose is just... well, it speaks for itself. And what's even better? You can glue the arms anyway you like. Not an easy build though - small and pointy ends can be a bit annoying. But if this is one of your favorite pokémon, go for it - though I don't know when it will be up on :iconpaperpokes: [link]

It will also need some weight on its left foot for balance. A bit tricky, but since each leg part is separate, anything gone wrong can be fixed by redoing only one foot.

Hope you guys like Scyther!!
Show
Add a Comment:
 
No comments have been added yet.

So, this is the first time Sceptile is actually showing (completely) on a photo!!

I had a really good time building these guys, Sceptile is the easiest, followed by Swampert and mother-f** Blaziken (ok just that hair thing).

The three of them scale pretty good, though my Blaziken is a little bigger then the one on the blog.

Blaze [link] and Swamp [link] are already posted, Sceptile will be out someday :D

All the models were edited by :iconz8-0: , and you can only find these Amazing models on :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Time to get out of my lazyness...

Sceptile's been ready for a long time, but I couldn't decide which background to upload it... Lavender took out all of its badassness, so let's try with light blue ^^ Edit: I would add hydrangeas on the back, but Sceptile absolutely loathes hydrangeas...

This awesome model was edited by :iconz8-0: , it's very fun to build and not too hard - not for beginners, but still average difficulty.
One of my favorite Pokémon, specially since it's a grass starter - they rule!!!

The twig on it's mouth is a real one - I strongly advise adding one to your model. It looks utterly cool!

Time to get back to work, cause I have to finish building another green model, and print and build another one after XD!

Look for Sceptile on :iconpaperpokes: [link] someday (soon?)!
Show
Add a Comment:
 
No comments have been added yet.

Pokeflute is ready to wake up sleepy guy

Will be released soon on [link] as soon as: iconpaperpokes: wants

P/s: you will see I will submit a lot today, and rest for the whole KAKAKAKA
Show
Add a Comment:
 
No comments have been added yet.

Another new pokemon papercraft is ready to public when it get a place

The model is from :iconz8-0: and build by me

P/s: He needs a penny each feet to make him stand correctly. It is an medium models ~ Try to make it when it is public in [link]

Outside picture will coming soon ~ Try to guess how he will be :D:D:D
Show
Add a Comment:
 
No comments have been added yet.

Well, I am excited about a lot of thing so I will make my friend are happy because he want to see murkrow - his fav models

:iconluisferrari: do you satisfy with it ~ is it worst as you imagine :D:D:D

It is designed by :iconz8-0:

You will see it very soon on [link]
Show
Add a Comment:
 
No comments have been added yet.

This is the picture of the papercrafts of the Final evolutions of the starters of Kanto, aka Venusaur, Charizard and Blastoise XD

Models edited by :iconz8-0:

Venusaur can be download here: [link]

The Charizard on the picture can be download here: [link] and there's another version of it on Paperpokes too: [link]

Blastoise can't be downloaded now, but will be released sometime in the future on Paperpokes.
Edit: Blastoise can be downloaded now on Paperpokes: [link]

I tired something different on the backround and I liked the result of it :D
Show
Add a Comment:
 
No comments have been added yet.

These were the Halloween special models of Paperpokes.

The are perfect ain't they? Thanks to :iconz8-0:

When I first saw them, still on the pdo, I felt in love, it's really cool and great to have these models built XD In special The regular one, IT'S PERFECT! The six legs were really hard to build, placing the gold parts were a pain, but I must say, IT'S WORTH :D I haven't even noticed all the legs when I first saw the pdo, just found out that there were six legs when :iconz8-0: told me XD

The origin form chibi proofs that not all the chibis are easy to build, in fact, this one is really hard. The gold parts and the spikes were REALLY hard to build, but if it were more simple would look a lot weird.

The Altered form would be easy if it wasn't for the neck gold parts, in special the middle ones.

All of them are perfect and stay perfect together :D

They can be downloaded at Paperpokes:
Regular Giratina: [link]
Chibi Origin Form Giratina: [link]
Chibi Altered Form Giratina: [link]

Have fun building them :D They are hard but it's really worth having them XD
Show
Add a Comment:
 
No comments have been added yet.

Hydreigon Papercraft
Edited by :iconz8-0:

Happy New Year :D

We have a lot of dagons today, don't we? Just one of the models posted today is a bit different, can you tell which one and why?
This is an amazing papercraft of an amazing dragon :D Btw, I had no idea that this year is the chinese year of the dragon, so Hydreigon fits the year :D I don't like the 5th gen a lot, but there are some pokemons that I think are amazing, and Hydreigon is one of them! This model ain't an easy task, not a hard one either, the worst is closing it, which gave me a small headache XD Also, remember to add the weight only before closing it and close at the indicated place at the pdo, this will make the building way easier. Keep in mind that on Hydreigon is really important to follow the numbers, it's unfolded on a different way, since it can't be closed at the legs or the tail, they are very detailed to close at them.

Btw, it's staring me right now, it does it everytime, I think it wants me dead XD

My pictures usually have a bigger picture and some smaller ones showing other angles, but this one is amazing on every angle so I created the picture like that. Hope you like it :D

Download it here: [link]
Also, if you liked this one, you may also like Fraxure: [link] that can be downloaded here: [link]

Have fun building :D I sure did :D
Show
Add a Comment:
 
No comments have been added yet.

Ludicolo (8) ludiludi colo (8) ludicolo (8) YEAAAAHHHH babyyy lol... This charro pokemon is fun to build, and it's one of my favorite pokemon. The original idea was buildin' 3 Ludicolo and pic them dancing The Macarena xD but i had enough building just one (Sorry Brandon :P).

Model, obviosly, by :iconz8-0: and someday posted at [link]
Show
Add a Comment:
 
No comments have been added yet.

Here it is! Weezin-wee... WEEEEEEE :3 i love this pokemon and i really enjoyed building this one. I can say this model it's no easy... even better, under the easy!

Model edited by :iconz8-0: and coming up soon at our website.

Pd. I'm cooking something interesting :P ... but.. :iconjyxxie: i really need your help!... and Bran... good job editing this one... :) thank you
Show
Add a Comment:
 
No comments have been added yet.

Purrloin, edited by :iconz8-0: and built, obviously, by me. Coming up soon at our website. I usually build the models resized smaller, but it'll be posted in the regular size.

Have fun building it.
Show
Add a Comment:
 
No comments have been added yet.

Who's that Pokémon?
...



Coming (very, very soon) to a Paperpokés website, near you.

Most repeatedly requested Pokémon, delivered - everyone say: "Thank you, POdragon!"
Show
Add a Comment:
 
No comments have been added yet.

This was intended for Paperbuff's Birthday earlier this year, but things didn't exactly pan out the way we intended. She would have loved this model so much - it was her favorite Pokémon - and it's near perfect, thanks to PMF.

I know that we have already done this model before, but she was never entirely satisfied with it's pose or it's finished result. So in her memory. we've finally made things right.

This will be available on our website [link] in late August.
Show
Add a Comment:
 
No comments have been added yet.

While I am on Uni holidays, I think I should probably make as many Paperpokés models as I can squeeze in, so here is the latest one.

To be honest with you guys, I really only played Pokémon Red/Blue (and then half of Silver/Gold), so I really am only familiar with the first generation and some of the second gen. This fifth gen just freaks me out - there is an ICE CREAM CONE pokémon!!!

Anyway, with my rant out of the way, I've been after Abra for ages - I think it's just so adorable, snoozing away. I am very grateful to POdragon [link] for whipping this up for me - I'm very spoiled :) Oh, and by the way, this is the shiny Abra texture that I built, the normal was so drab in comparison.

The only issue I can see others having when building this model are the fingers - they are a little fiddly - but that really is a minor detail, otherwise, it's a medium difficulty level build. I have no idea when this will be scheduled, but it'll probably be into the new year.

2011! That's the future! Where's my flying car already?
Show
Add a Comment:
 
No comments have been added yet.

Este es uno de mis personajes favoritos de PS1, y de uno de los primeros juegos que tuve. Su descarga esta disponible recién para la primavera. Espero les guste.
Show
Add a Comment:
 
No comments have been added yet.

Este es un modelo de Diablo que me gustó mucho espero les guste. Es un modelo bastante complicado, sobre todo la espalda. Espero en algún momento poder compartirlo. Espero les guste XD.
Show
Add a Comment:
 
No comments have been added yet.

Este es un modelo del Raid Boss - Baium del juego Lineage II. Formará parte de la expo ModelFan en Santa Rosa como emblema y será sorteado al final de día... Espero les guste..
Show
Add a Comment:
 
No comments have been added yet.

Not a Paperpokés this time: this is a Tenpepakura model half its normal size. This Snivy is in fact 5,5 cm tall. Wee little Smugleaf! :D

On a side note: this is the first time I make a papercraft with normal printer paper! Flimsy! :D But dince it's so small, it's as sturdy as it's needed.

Template can be found here: [link] <pdf template
here you can find assembling pics for reference (also some explanations, but it's in Japanese... ;P) [link]
Show
Add a Comment:
 
No comments have been added yet.

:iconlyrin-83:
Empoleon is coming along nicely. I think I'll finish it today. Shush! Better not to say it out loud, or things will happen, and I won't!
Show
Add a Comment:
 
No comments have been added yet.

Time to snap some official pics! :D
No official pic > no release, so I'd better make some more... ;P
Btw, this is Bulbasaur papercraft V2, a new version of one of our oldest models!

As usual, you can find Bulbasaur V2 on our Paperpokés website www.pokemonpapercraft.net/2011… ! :D

3D Editing by Brandon, aka !z8-0.
Template and build by me.

:thumb203152601:
Show
Add a Comment:
 
No comments have been added yet.

This is my SS Link papercraft. It's the best one I did, and I'm pretty proud of it.

Link to the papercraft:[link]
Show
Add a Comment:
 
No comments have been added yet.

This is my Darknut papercraft from The Legend of Zelda: Twilight Princess. It's my biggest one I've made (about 50 cm with the sword), and maybe the hardest. I'm quite proud of it. I think it's better than my Skyward Sword Link papercraft I made. Here's the link to the craft: [link]

This took me about 3 weeks to build. And yes, you can take off the helmet. You can also switch the swords.

Credit to Ignatius for making the template.

Different views:
[link]
[link]
[link]
[link]
Show
Add a Comment:
 
No comments have been added yet.

Here is my finished Link papercraft. This time it is not taken on an iPod, but on a real camera.
Show
Add a Comment:
 
No comments have been added yet.