Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
ok, before you do anything, you must know Papercraft is easier as it looks and it's, like all the other art, a learning by doing thing.
As more as you build, as more experience you will get.
But i must also say, sometimes you will stuck, sometimes you will despair and sometimes (hope not) you will fail.

That's why i wanna give you a good start into this great artisan craft art.
By the way, this is only my way to do this.
Try some other technics and you will find your own best way :)

NOT REALLY RULES:
:bulletgreen: have fun during the build
:bulletgreen: if you are not in the mood ore you are stressed, stop it
:bulletgreen: it is just paper, so if you made a mistake, even it hurts, throw the pieces away and build it again
:bulletgreen: make brakes
:bulletgreen: take your time and have patience, quality instead of quantity
:bulletgreen: think before you do something
:bulletgreen: don't be afraid of tiny ore complicated pieces
:bulletgreen: quite every model is different
:bulletgreen: paper is more stable as you may think
:bulletgreen: did i say that the build should make fun :D

special rule for smoker :smoking:
:bulletgreen: put ashtray and cigarettes away from that place where you build ;P

PAPER:
don't worry, no special paper needet, but you should use paper with 80gsm (gramms square meter) and upwards

TOOLS:
i got a few tools, that i use the most time.
That don't mean that you MUST have this tools too.
I repeat, it's only my way.

PROGRAMS:
sometimes you will need a special programm to open the model or rather print the model.
That programm is called "Pepakura Viewer" which you can download here

It's also very helpful when you stuck ore just to view, which part is where.

P.S.
this programm is only to view the models, not to create some.
Not even the Designer can "create" models
it just convert existing 3d meshes into printable sheets.
but that's an other storie :)

but enough of talking, let's start with image one :aww:




the model that i used for this tutorial is "Blaziken" which you can download here

LINKS:
[link] (paperkraft.blogspot.com)
[link] (papercraftparadise.blogspot.com)
[link] (www.pokemonpapercraft.com)
[link] (www.nintendopapercraft.com)
[link] (thepapercraftcouple.blogspot.com)
[link] (www.papercraftmuseum.com)

P.S.S.
i just wrote some links together
if you have one too, pls tell me

P.S.S.S.
critque is allowed
if you have any solutions ore found a issues in the tut, like grammar ore text failure, pls tell me :wave:
Show
Add a Comment:
 
No comments have been added yet.

NOTE:
This file was made with Pepakura Designer Version 3. It cannot be opened with Pepakura Designer or Viewer version 2 or lower.


If you can't figure out how to download this file, refer to this One-Step How-To Guide




> Assembled Image

> PDF of Pieces




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

ATTENTION ALL VIEWERS COMING TO SEE THIS DUE TO ITS DD STATUS:
The "Assembled Image" group shot looks much nicer! Don't forget to check that out!




Assembled Image

PDF of Pieces




If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Assembled Images

PDF of pieces


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Recently i modeled a human head for a commision (that i'll show you in two months) and yesterday i woke up with this idea, "¿why not to model a Tony Stark mask?, ¿Wouldn't it be a great gift for RDJ and IRONMAN fans?", well voala, here it is, enjoy it!.

You can find all the files at [link] including blender, PaintDot Net, LOOXIS and PDF versions.

Right now i don't have time to build it, so don't expect any photo of it until November.
Show
Add a Comment:
 
No comments have been added yet.

Warming up for Avengers' movie here's my Mjolnir model.

You can download this papercraft (and its source files) from [link]

Almost all parts fit in one page, only the handle and the support parts are two-page parts, use alignment lines to cut, align and join the pieces before building this parts.

Once you build all the parts, use the support part to join the head to the handle and also to align the top part over the head. Check the schematic included in the last page for further reference.

Enjoy!
Show
Add a Comment:
 
No comments have been added yet.

Finally here's the long awaited ScannerJOE's version of the Daft Punk Thomas' helmet.

The file is at [link] it includes pepakura, blender, and manual files.

This is not like any other papercraft as it introduces my new technique to build spheric surfaces using thick cardboard (around 2mm), WITHOUT USING MACHE.

This is the one shown at [link] and [link]

Enjoy it!
Show
Add a Comment:
 
No comments have been added yet.

:boogie: :star:CLICK TO DOWNLOAD! (12MB):star: :boogie:


EDIT 10.10.12:
Added PDFs and my signature ink-efficient texture edits, as well as increased the scale from 42'' to 44.5'' long. As I've made more keyblade templates, I'm getting a better idea of how big they're really supposed to be. :)

Thank you all who have downloaded this, and my other templates as well. :D You've really encouraged me at a time when I especially needed encouragement. :hug:




EDIT: ADDED A PDO FOR THE KEYCHAIN!!!! I gotta say, I did not expect this to be so popular, otherwise I would have originally submitted both together. As of this moment, 120 downloads since yesterday afternoon??!!!!! WT FLYING FRUITCAKE!!?!??!!! :noes: :squee::squee::squee:

Btw, here is a pic of the one I built: [link] :la:
******************************



HERE YOU HAVE IT!! :faint:

I spent hours and hours and hours trying to figure out how to manifold-iffy this 3D model....(my noobishness rears its ugly head!)....only to give up and then spend hours and hours and more hours MANUALLY ALIGNING THE INDIVIDUAL POLYGON FACES ON THE PRINT TEMPLATE! If you zoom in really, really close in Pepakura Viewer, you'll see what I mean.

The 3D preview is glitchy, but the template itself should work fine as long as you *mostly* ignore the Edge ID numbers and the mountain/valley nature of the dotted fold lines; for some reason, half of all the faces were inside out. That's another thing I spent hours trying to learn how to fix....

Anyways, I've wanted this keyblade long time. Me thinks it is the best looking one since Oblivion and Oathkeeper. I dun like the cluttered cartoonish ones, which account for most. I like the elegant, sober ones. Is that how you say...? :P

The length is based on the wooden swords I train with ([link] ) which are 40 inches / our steel practice swords which are 37-40 inches tip to pommel / bamboo shinai which are 45. I keep seeing keyblades that look too small to be screen-accurate, and I think the reason is that people are making them out of 36-inch wooden dowels. 36 is WAY too short for an anime sword....

....Don't. even. say it.... :evileye:
Show
Add a Comment:
 
No comments have been added yet.

EDIT: Increased the scale a smidge (Oblivion now 45.4 inches and Oathkeeper now 37.7 inches tip to pommel----which is what they would be irl if Riku was 5ft6'......I think.), made progress on Oblivion, and most importantly added two PDFs of the finished Oathkeeper template. :D

PS: I only get to use a computer about twice a week now, so if you're waiting for a request from me, sorry they're all taking so long. :(


Oathkeeper is completely done...... I've sorted Oblivion's parts, but haven't tried to put them together at all yet. I've already made an Oblivion template before, as part of my Deep Dive Riku Pack. So, download that too if you want it before I update this.

You can thank Blood Stain Child for getting me hyper enough to finish this much by today instead of NEXT Friday. In fact, I think I gained a level in Papercrafting. Pepakura Designer has this infuriating glitch that I've finally figured out how to work around, which means I should get more templates done quicker. Such as my armors. :shakefist:

ABOUT THIS MODEL: I found a Roxas model in KH2 that had both Oblivion and Oathkeeper attached to it. Theoretically, that should mean that these keyblades are proportionate to each other as they appeared in the game------Oathkeeper really IS that much smaller. The reason for this is because of the 400-year-old sword style that Roxas uses, in which a short katana is wielded in the left hand while a normal long katana is wielded in the right. (Regardless of weather or not the swordsman is lefthanded.)

I've been nagging my sensei for years to teach me more of that style. I freaking love it! :squee:
Show
Add a Comment:
 
No comments have been added yet.

A request that fortunately turned out not to have any of those messy problems which keyblades tend to.... :happybounce:

Specifically, I got this from a high-resolution (cutscene) model of Axel ripped out of Kingdom Hearts II: Final Mix.

As for how to properly size this papercraft.... Compared to the model of Axel that it was a part of, when you hold this weapon in the center, the tips of the longest spikes should come up even with your elbow. Hold a yardstick or meterstick against your forearm if precision really matters to you and you want to be 100% sure before you print it out.

Enjoy! :D

(I really need to do a drawing of myself tucking motivation under my arm like a football and running for my life........that describes how I work only too well.) :XD:
Show
Add a Comment:
 
No comments have been added yet.

:facebook: Visit my Facebook FanPage:www.facebook.com/Coby17deviant…

:points:If you like this pack of brushes, and you can donate me some points, do it! :points:
:iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz:

:bulletpurple:Credit me if you take/use! :iconcoby17:
:bulletpurple: Some of the brushes are part of the "derivative creation" laws,free commercial/empresarial use NOT allowed, unless obtaining permission/license with me.
:bulletpurple: Feel free to use for other things without asking! (personal use, DA, etc.),
but i'll be glad to know where you used them :blowkiss:
:bulletpurple: :+fav: 's are always good!
:bulletpurple: Don't steal or redistribute my work as your own! T_T
:bulletpurple: Enjoy! *_*

:bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple:

:bulletpurple: Dame el credito si lo usas :iconcoby17:
:bulletpurple: Algunos de los Brushes son de los denominados "trabajos derivados", se PROHIBE su uso comercial libre, favor de contactarme para obtencion de licencia/permiso (no gratuito en comercial/empresarial).
:bulletpurple: Sientete libre de utilizar el material para otras cosas sin pedir permiso! (uso personal, DA, etc.),
pero estare de feliz de que me muestres en que los usaste :blowkiss:
:bulletpurple: :+fav:´s siempre son buenos!
:bulletpurple: No redistribuyas mi trabajo como tuyo
:bulletpurple: Disfrutalo! *_*

:iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz:

:iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz:
Show
Add a Comment:
 
No comments have been added yet.

:facebook: Visit my Facebook FanPage:www.facebook.com/Coby17deviant…

:points:If you like this pack of brushes, and you can donate me some points, do it! :points:
:iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz:

:bulletpurple:Credit me if you take/use! :iconcoby17:
:bulletpurple: Some of the brushes are part of the "derivative creation" laws,free commercial/empresarial use NOT allowed, unless obtaining permission/license with me.
:bulletpurple: Feel free to use for other things without asking! (personal use, DA, etc.),
but i'll be glad to know where you used them :blowkiss:
:bulletpurple: :+fav: 's are always good!
:bulletpurple: Don't steal or redistribute my work as your own! T_T
:bulletpurple: Enjoy! *_*

:bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple:

:bulletpurple: Dame el credito si lo usas :iconcoby17:
:bulletpurple: Algunos de los Brushes son de los denominados "trabajos derivados", se PROHIBE su uso comercial libre, favor de contactarme para obtencion de licencia/permiso (no gratuito en comercial/empresarial).
:bulletpurple: Sientete libre de utilizar el material para otras cosas sin pedir permiso! (uso personal, DA, etc.),
pero estare de feliz de que me muestres en que los usaste :blowkiss:
:bulletpurple: :+fav:´s siempre son buenos!
:bulletpurple: No redistribuyas mi trabajo como tuyo
:bulletpurple: Disfrutalo! *_*

:iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz:

:iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz:
Show
Add a Comment:
 
No comments have been added yet.

:bulletpurple: Como instalarlos en SAI, aqui el tutorial: fav.me/d6pla1p
:bulletpurple: How install this brushes in my SAI tuto: fav.me/d6q6t6d

:facebook: Visit my Facebook FanPage:www.facebook.com/Coby17deviant…

:points:If you like this pack of brushes, and you can donate me some points, do it! :points:
:iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz: :iconfavthen::icondownloadplzz:

:bulletpurple:Credit me if you take/use! :iconcoby17:
:bulletpurple: Some of the brushes are part of the "derivative creation" laws,free commercial/empresarial use NOT allowed, unless obtaining permission/license with me.
:bulletpurple: Feel free to use for other things without asking! (personal use, DA, etc.),
but i'll be glad to know where you used them :blowkiss:
:bulletpurple: :+fav: 's are always good!
:bulletpurple: Don't steal or redistribute my work as your own! T_T
:bulletpurple: Enjoy! *_*

:bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple::bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple: :bulletred: :bulletblue: :bulletgreen: :bulletpurple:

:bulletpurple: Dame el credito si lo usas :iconcoby17:
:bulletpurple: Algunos de los Brushes son de los denominados "trabajos derivados", se PROHIBE su uso comercial libre, favor de contactarme para obtencion de licencia/permiso (no gratuito en comercial/empresarial).
:bulletpurple: Sientete libre de utilizar el material para otras cosas sin pedir permiso! (uso personal, DA, etc.),
pero estare de feliz de que me muestres en que los usaste :blowkiss:
:bulletpurple: :+fav:´s siempre son buenos!
:bulletpurple: No redistribuyas mi trabajo como tuyo T_T
:bulletpurple: Disfrutalo! *_*

:iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz::iconcommentplz:

:iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz::iconcoby1plz::iconcoby2plz:
Show
Add a Comment:
 
No comments have been added yet.

This is made for fun and those who remember the good old days of getting these for Christmas in the 1980's. This can be made and used to place under a small Xmas Tree for a little old school Diorama of an 1980's style Xmas. hehe ;) This is part of a series of cubees i have made for Christmas.

I adjusted the Cubeecraft / Papercraft idea to make mini-scale version of this old Jefire toy box from 'Transformers' From Hasbro. OK I know its not exactly the same as the 'Real' version. This is made just for fun to the good old days! Here is a photo of some of the other Mini Old toy boxes i have done to see what they would look like when put together [link]

And some more of these Old School Toy boxes can be found here [link]


Also there are some more of my Christmas Cubees (including Snowmen, Santa, The Grinch, Gingerbread men) can be found here [link]

Transformers (c) Hasbro
Show
Add a Comment:
 
No comments have been added yet.

This is made for fun and those who remember the good old days of getting these for Christmas in the 1980's. This can be made and used to place under a small Xmas Tree for a little old school Diorama of an 1980's style Xmas. hehe ;) This is part of a series of cubees i have made for Christmas.

I adjusted the Cubeecraft / Papercraft idea to make mini-scale version of this old The Cobra Terror Drome toy box from 'GI Joe' From Hasbro. OK I know its not exactly the same as the 'Real' version. This is made just for fun to the good old days! Here is a photo of some of the other Mini Old toy boxes i have done to see what they would look like when put together [link]


And some more of these Old School Toy boxes can be found here [link]


Also there are some more of my Christmas Cubees (including Snowmen, Santa, The Grinch, Gingerbread men) can be found here [link]

G.I. Joe (c) Hasbro
Show
Add a Comment:
 
No comments have been added yet.

This is made for fun and those who remember the good old days of getting these for Christmas in the 1980's. This can be made and used to place under a small Xmas Tree for a little old school Diorama of an 1980's style Xmas. hehe ;) This is part of a series of cubees i have made for Christmas.

I adjusted the cubeecraft idea to make mini-scale version of this old Eternia toy box from 'He-Man' From Mattel. OK i know its not exactly the same as the 'Real' version. This is made just for fun to the good old days! Here is a photo of some of the other Mini Old toy boxes i have done to see what they would look like when put together [link]


And some more of these Old School Toy boxes can be found here [link]


Also there are some more of my Christmas Cubees (including Snowmen, Santa, The Grinch, Gingerbread men) can be found here [link]

He-Man (c) Mattel
Show
Add a Comment:
 
No comments have been added yet.

This was a female Andrewsarchus character I created specifically to be a papercraft. I also tried to make this one much easier than the others. That wasn't exactly a success because the head is a bit difficult, but I'd still rate this 4/10 (I'd still build some pokemon papercrafts before attempting this). This requires photoshop and rar-opening software to build.
Show
Add a Comment:
 
No comments have been added yet.

Well, that's my name for him anyway.  This is a papercraft I fully created on Blender (meaning this model was not modified from anything else) of As Nodt's most monstrous form.  It's over two feet tall and was intended to be very large but can be printed out smaller if desired.

You can build your own by downloading it here on this page.  It requires Photoshop and .rar opening software to build.  It's easier than it looks to make, but will need to be stuffed or reinforced if you want a large-sized As Nodt.

This character is a a copyright of Bleach.
Show
Add a Comment:
 
No comments have been added yet.

I decide to make a papercraft of my Indricotherium character, and a really large one too. He's 23" tall and 25" long. Perhaps if I get more space, I will remake him even bigger than this. I have him available for download if you have photoshop, .rar opening software, and a desire to build him too. Hyaenodon not included.

The diffictlty rating is 6/10. Overall, I found him to be a fun challenge, especially for those who have been building papercrafts a long time. The hardest part is dealing with his size and the fact that this requires tremendous amounts of ink.

This is the first papercraft I have that was completely designed in every way by me. It will not be the last.
Show
Add a Comment:
 
No comments have been added yet.

This is the tutorial I put together for the Six Intersecting Stars (also known as Modular 20 in my gallery). I apologize if any of the steps are a bit confusing, but I don't really knwo how to explain this very well. a lot of trial and error on your part will be required. A LOT! On the other hand, at least you have refferance pictures. I didn't. anyhow, hav fun with it!

(Also, I really don't care about typoes. Let it go. If you are goign to critique it, then go ahead and mention them.)

Crease pattern for the module: [link] (I didn't invent it. I'm only explaining how to do it!)
Show
Add a Comment:
 
No comments have been added yet.

This is the crane that glides like a paper airplane. It is the most difficult of the three since the squash fold is not a straight...asymmetrical?...one. If it doesn't work for you then just ask me and I'll see where your problem is.
Show
Add a Comment:
 
No comments have been added yet.

This is the tutorial for the "proper crane", the one that most people will think of when it's mentioned. I know that my photoshopping skills suck and he pictures are a bit blurry, but bear with it and you should be fine.

I would highly reccomend you practice with the flappign crane for a while to get the hang of reverse folds, petal folds and squash folds before attempting this one.
Show
Add a Comment:
 
No comments have been added yet.

I unfolded the helmet in two pieces, partially because I'm horrible at 3d modelling and didn't want to join them and partially because I thought that if I were building this helmet I'd want it to be in two pieces so I could actually take the front part off/slide it up. I don't know.

DOWNLOAD: www.mediafire.com/download/l2q…
Show
Add a Comment:
 
No comments have been added yet.

I'm planning on making the Nord Greatsword from Skyrim. Thought I'd post the pep file in case anyone else was interested.

*Updated on 10-17-12*
I went back and touched up the file so it should be a little easier to build. Wow I really didn't know what I was doing back then lol.
-Added flaps and texture
(since I modified the mesh the texture is a little off, use at your own risk)

DOWNLOAD LINK: www.mediafire.com/download/jse…
Show
Add a Comment:
 
No comments have been added yet.

My first Daedric Helmet was my first attempt at using Pepakura Designer, and while I made it accomplish what I needed it to do I decided to unfold it again. I'm pretty proud of it, especially since it's an obvious indication of how much I've learned.

To download this and the rest of the Daedric armor please visit this page: kuraudo3.deviantart.com/art/Fu…
Show
Add a Comment:
 
No comments have been added yet.

(Update 02/14/11)
ADDED A WATERMARK
(Update 02/14/11)

(Update 02/12/11)
Just found that the name of this keyblade is Master's Keeper
(Update 02/12/11)

Here we have Eraqus' keyblade. He is the master of the three main characters of KH BBS. Sadly he dies at the end of the game but Aqua still has this keyblade in the realm of darkness. 1 hour on photoshop. If you make this keyblade using this don't forget to link back here. Thank you.

My other Keyblades

Kingdom Hearts: Birth by Sleep
Wayward Wind
Earthshaker
X-Blade (Complete)
Rainfell
Master's Keeper
Stormfall
Lost Memory
Frolic Flame
Darkgnaw
Destiny’s Embrace
Crown Unlimit
Ends of the Earth
No Name
Star Seeker
Master Xehanort’s Keyblade
Brightcrest
Void Gear
Show
Add a Comment:
 
No comments have been added yet.

(Update 14/02/11) Added a watermark just in case somebody steals it.(Update 14/02/11)

(Update 28/10/10)
I saw some errors in my first one so I took updated it.
(Update 28/10/10)

From the game Kingdom Hearts: Birth by Sleep, which is set 10 years before the first Kingdom Hearts, I bring you Ven's keyblade. This keybalde is wield by Ven (the Roxas-look-a-like). I spent a few hours in photoshop and have good look in a couple of recent screenshots of the game to make it. If anybody uses this to make the keyblade, can you please link it back to me. Thank you.

My other Keyblades

Kingdom Hearts: Birth by Sleep
Wayward Wind
Earthshaker
X-Blade (Complete)
Rainfell
Master's Keeper
Stormfall
Lost Memory
Frolic Flame
Darkgnaw
Destiny’s Embrace
Crown Unlimit
Ends of the Earth
No Name
Star Seeker
Master Xehanort’s Keyblade
Brightcrest
Void Gear
Show
Add a Comment:
 
No comments have been added yet.