Deviant Login Shop  Join deviantART for FREE Take the Tour

Similar Deviations
Organized by Artist
Hell yeah
after three and a half months of hard work
one month 3d editing and Pepakura cutting, two and a half building time
i'm finally done
:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz:

this was a really sick project and i'm apologize for the long waiting time
but here is that, what you are all (ore at least a few) waiting for
the final version of the Clap-Trap :aww:
and without being arrogant
i'm fucking proud of it :boogie:

-IMPORTANT EDIT!-
i noticed that a lot of people are irritated of the parts in the pdo file (top and left side)
these pieces are garbage and useless
i designed the model in that way, that you don't need them for building, they exist just because i need the taps for the open sides.

why you don't need them?
the most of the pieces are used to close the parts
but because you have to glue them together anyway, they are useless
and why waste time to cut and money for ink for over 100 pieces ;)

you also may notice that they are also complete parts like the lens ore the shoulder plates
don't think about them
in the building process i re-edit the model several times, re-import the edited pieces into the pdo and moved the old sheets out of the printing range.

that's also the next point
all this pieces on the top and left will be NOT printed
so don't worry, you get everything what you need in the right way :)


file description:
the file contains three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get here

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want

the file also include the original texture as .jpg and .psd (to change the colors)
and two others textures
one from jacob's cove (from the Dr. Ned addon)

and an instruction for the modifications

for download, just click download....
ore here

further model description:
the model will come on 65 pages with over 400 parts
so be warned, it's not an easy one

if you have problems ore stuck
pls ask me here
ore in the Papercraft Forum from :iconthepapercraftcouple: (thx for support guys :) )

what's left ?
just to say have fun :)


p.s.
send me a link of your build ore wip version
i will feature it here :)

-other shots-
Show
Add a Comment:
 
No comments have been added yet.

when i take a look at the little hint in description of Pegasusmon, that i wrote at that time
i never thought, that I would be the one who build myself a model of Renamon...
lol and i never thought that it would take quite one year for this :D
ok, not reall but it took me the longest time

it was pure coincidence that i found one day an image of Renamon in my messagebox also with some free resources


i started to edit the model but it was not "that thing"
the model was in a x-stance and i had no idea what i should do with the fur
so i stopped the work and build some others

then it also was the time i had no access to my PC and the time passed
after a while a second image pop up in my message box

and i just thought
"HOW FUCKING SWEET IS THAT !?
THAT'S IT!! :omg: :wow:


so i ask :iconkp-shadowsquirrel: KP-ShadowSquirrel, owner of both models, if he would spend....if he got a low-res version of it ^^; and then if he would spend it for a project.
so you can call this officially my second collaboration :)

i don't know but i found that 2D-3D convertions always look like ass (best example, Simpsons :D )
except one, those from nintendo
take sonic, mario, the pokemon, zelda, they really found a way to convert them

but there is also one who managed it
and in an awesome way
yes i mean you :iconkp-shadowsquirrel: KP-ShadowSquirrel ;)

this model of Rena is just super cool :dance:
and i don't say that just simply :)

the editing was not easy to remove all the clippings but after the third attempt it worked
and i can tell you people, this was just fun to build :dummy:
and the result...even i was blown away :icontardboogieplz:

the final building process was the hardest part
it took all my knowledge and techniques to combine all pieces together
holding the model until the glue is sticky
press the taps with tweezers over three edges
put the finger inside and press from the other side with something flat (sounds stupid but maybe you know what i mean :D )
so i declare this to difficult level 6 of 10

About the Fur:
well, i thought a long time what i can use for the fur
because the original mesh was not possible to build (defenitly)
so i decided to make it out of cotton wool
haha, it took me one hour to peel it in the right shape
but it was worth :)

Specifications:
in the download file you will find three pdo's
one with folding lines and texture (lined)
one with folding lines but without texture (white label)
and one without folding lines but with texture (lineless)

so you need as always the Pepakura Viewer which you can download here

the model comes on 23 pages
with 238 pieces

the file also contains a modified texture that works for the model and some color dots that i have used to prevent some texture issues

i didn't write a instruction
is hard but sorted in the way you should build it
but if you have any question either, take a look at the building process gallery ore just ask me :meow:

to download the model just click download ore here :)

-update-
i also uploaded now the sheets in pdf format
you can download them here

what's left?

some word to the bloggers


because this is a collab, you have to give credits to :iconkp-shadowsquirrel: KP-ShadowSquirrel too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use the renders ore screenshot of it of KP-ShadowSquirrel
except he write it here in the comments ore you ask him about it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!



and trust me, i search for my stuff ;)

if you wanna write a critique
feel free
but don't critique the model itself


ah yeah :)
:iconjyxxie:, :iconp-m-f: and :iconz8-0: (correct me if i forgot one ^^; ) started a new blog about Digimon Papercraft here
take a look and add the link to your faves, there will come some really cool stuff :w00t:

.....

and now?
Flamedramon :D


-other shots-
Show
Add a Comment:
 
No comments have been added yet.

OLD SCHOOL CRAFT MISSION 3 - STAGE 1

old school fans know may this game too good
some may love
and some just hate it
(ore both :D )

one of the greatest score shooter but also one tough
if you don't choose the right weapon for the right situation you're just fucked :D

about the model:
i just have to say this
sometimes i have the feeling that the creator don't build there own models
some are just badly designed
but not in this case
quite the opposite
when i have to describe it, then only with one word
!genius!

this model is just genius and you just know that "Irem" build this one not only one time
everything fit just perfect

if i have to prefere a model as a starter
then this one
try it, build it
and enjoy it, this one is just great :)

you can download the model here
the power orb is also avaiable here

Overview of the Mission
Show
Add a Comment:
 
No comments have been added yet.

NOTE:
This file was made with Pepakura Designer Version 3. It cannot be opened with Pepakura Designer or Viewer version 2 or lower.


If you can't figure out how to download this file, refer to this One-Step How-To Guide




> Assembled Image

> PDF of Pieces




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

For those that don't recognize it, this is the Needler, a Covenant weapon from the PC and Xbox series, Halo! There’s more info on the wiki page if you're really interested. Specifically, this is the Halo 1 model, but not too much changes about it throughout the series except the level of detail (and being dual-wieldable in Halo 2!) and overall size.

I've had this sitting in my incomplete folder for over a year and a half now, and with the lull I've had since finishing the Combat Shotgun, I decided to wade through that mess and see if there was anything worth salvaging. Honestly, this was more work than I was expecting it to be, I really made a mess with the geometry way back when, and putting a model together on this scale was a bit interesting at times. Eh, it was totally worth it.

I was a little torn on how to handle the needles on it. In the 1st person view, they look like a dark-purple-ish blue, but in the 3rd person, they’re a very bright pink, so I tried to find a middle ground… they came out a lot darker once I printed them though, so I guess I should have made them a good bit brighter. Oh well!

The final build came out to be ~2' 2" (~66 cm) long, ~8.5" (~22 cm) wide, and ~2' (~60 cm) tall. This actually is life-sized, honest! I took the dimensions from the halo wiki itself. Look at this picture of Capt. Keyes with one if you don't believe me, the thing is the size of his torso! Not to mention I'm only like 5'6" to begin with... As per usual, it's made entirely of plain copy paper, no cardstock included. If anyone tried building one, I would suggest cardstock for at least the inner handle if nothing else. Hmm, I think that’s it...


Oh god, I hope I’m not developing a gun fetish with all the models I’ve done lately...



> PDF of Pieces

> PePaKuRa PDO file



This is part of a series:
Needler
Activation Index
Cortana
Master Chief
Halo Ringworld






Fear the pink mist...




.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . . . . ./\ . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'






Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Alright! I'm on a roll this week! I give to you: Cortana, from the Halo series.

This one is surprisingly easy compared to the Master Chief model I did nearly a year ago... well, 8 months or so. So easy, in fact, that I didn't bother to write instructions for it. The pieces are all lined up on their sheets the way they need to be assembled.

For a little side-by-side, I included a size comparison picture at the bottom to give you an idea of how big she really comes out to be. With the Chief standing at ~13 inches (~33cm), Cortana is only ~8.5 inches (~22cm) tall, the base having a diameter of ~7 inches (~17.5 cm). In addition, as opposed to Master Chief's 9 pages (+1 for gun), Cortana is only 3 pages (+2 for base).




PDF of Pieces

Archive of PDO (PePaKuRa) Files



This is part of a series:
Needler
Activation Index
Cortana
Master Chief
Halo Ringworld







.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . . . . . . . . ./\ . . . . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'





Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Fenrir Keyblade from Kingdom Hearts 2. Oh man, I loved this keyblade, it was like a trophy, after defeating Sephiroth I think tifa gives it to you on...Hollow Bastion? or was it Radiant Garden? I should replay the series.
Anyway, The links!

4Shared:
[link]

Megaupload:
[link]

Kingdom Hearts is ⓒ Square Enix & Disney.
Show
Add a Comment:
 
No comments have been added yet.

Hello again! :D
It's been a while. Well, this is my version of the Medabot known as Rokusho. I made this because It was part of my childhood, and I saw the Metabee papercraft long ago, (I think the designer should be more known). Anyhow, I just couldn't resist making it.

4 Shared:
[link]

RapidShare:
[link]

Mediafire:
[link]

It contains PDOs, PDFs, and photos.

Hope you enjoy making it! :D
(I'm not planning on making any other medabot by now, at least not until I finish all the projects I have in mind)

Thank you everyone for the Favs! It's much appreciated n_n

Medabots is (c) Bee Train and the creator/directors.
Show
Add a Comment:
 
No comments have been added yet.

Finally finished this Gundam! can't believe I started with this project last year! haha, anyway, I've introduced the "Background colour" to this model because there were some annoying white pieces over the model which would look better with it.
Also included the possibility to build Open and/or Closed wings!
Test build was made by :iconairasumi: as well as the photographs!
The .rar contains: 9 PDOs, 9 PDFs as well, 21 Pages for the model (If you build only 1 pair of wings)

4 Shared:
[link]

Mediafire:
[link]

RapidShare:
[link]

And the Instructions are here:
[link]

Gundam is ⓒ Sunrise/Bandai/Sotsu Agency
Show
Add a Comment:
 
No comments have been added yet.

This is a Non-Specific Pistol with some moving parts (slide, safety, mag). Assemble it like an ordinary papercraft.

I made it for /po/ as an experiment in designing an intermediate-detail pistol model.

Dimensions:
Length: 6.75" or 17.5 cm
Height: 5" or 12.75 cm
Width: 1.25" or 3.25 cm
Barrel Length: 4.25" or 10.9 cm

Download Link (Mediafire)

As of 2013, the V2 iteration of this model is available, replacing the handmade patterns with digital ones and moving the breech component from the frame to the slide. It's available in black and stainless colors.
Show
Add a Comment:
 
No comments have been added yet.

This is a papercraft AKM model I originally made for /po/. It's rather large (1:1 scale), and can take a while to build because a lot of the parts have walls on the inside, for sturdiness. The safety and bolt are moveable. If you want, there's space to put a spring to push the bolt forward, though the strength of the spring vs. the strength of the parts would be your concern.

Download Link (Mediafire)

As of November 2013, the V2 iteration of this model is now available, offering a greater level of detail.
Show
Add a Comment:
 
No comments have been added yet.

This is a re-release of the NSP.
While the first release was handmade, this version is vectored for a more consistent level of quality.
There are also several design changes:
1. There is no more rear top box. Instead, this part, the breech face, is now part of the slide.
2. The pistol is now chambered in 9x19mm, to accommodate the thin barrel.
3. The takedown latch is now a slide catch, and is thinner, but remains non-functional.
4. There is now a (cosmetic) magazine release.
5. Overall dimensions are slightly more compact.

Download Link (MediaFire)

PDF Version (MediaFire, printouts only)
Show
Add a Comment:
 
No comments have been added yet.

Frost Dragon from The Elder Scrolls V: Skyrim
(Model of the Month at Zealot Hobby Forums)

I know Viinturuth is a random kind of dragon, but it was a Frost Dragon for me and I have multiple save-files to prove it :P

The model has a wingspan of 500mm and approx height of 460mm. Overall 690 parts.

Difficulty: Very Hard

Download
[HERE]

Original texture and model belongs to Bethesda / ZeniMax.
Show
Add a Comment:
 
No comments have been added yet.

A Tyranid Swarmlord from Hive Fleet Leviathan (Warhammer 40k)

Made using DoW2:Retribution resources.

The figure stands 36 cm tall. Overall 533 parts

Difficulty: Hard

Download [HERE]

Original texture and model belongs to Games Workshop and THQ/Relic.
Show
Add a Comment:
 
No comments have been added yet.

Legion from Mass Effect 2 with an M-98 Widow Anti-Material Rifle. The model is approximately scaled to Xenonray's ME2 paper models for consistency.

I've used the alternative appearance textures that you get after finishing Legion's Loyalty mission. Original and alternative textures are both included in addition to legs that are not standing on a box.

Also my build has LED lights installed in it.

Difficulty: VERY HARD
Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

I have finished to build my Spyro papercraft.
This is the download [link]
For instructions this is the [link]
For only the pdf this is the [link]
Show
Add a Comment:
 
No comments have been added yet.

Finally I have finished to build this amazing papercraft!
Designed by Chamoo232
Show
Add a Comment:
 
No comments have been added yet.

Rattly the rattlesnake from Donkey Kong country 2
Designed and built by me.
This is the download [link]
If you build it put a weight on the tail (piece 36 or 37) before closing the model, to make it stand
Show
Add a Comment:
 
No comments have been added yet.

After months of procrastination, I finally took pictures of this chilly bird.

This outstanding pose was edited by :iconjyxxie: or POdragon!
Not an easy build, full of small parts. It looks amazing hanging on my shelf, though ^^

There will probably be a standing pose too.

Some day on :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Garchomp papercraft, edited by Brandon.

I am very happy with this template - it actually stands, without the aid of the right fin! To make sure it wouldn't fall, I added some weight inside his feet. Not an easy build - thin arms, fins, small teeth and spikes - but a very fun one.

He looks amazing, watching from the top of a shelf ^^

Soon on :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Time to get out of my lazyness...

Sceptile's been ready for a long time, but I couldn't decide which background to upload it... Lavender took out all of its badassness, so let's try with light blue ^^ Edit: I would add hydrangeas on the back, but Sceptile absolutely loathes hydrangeas...

This awesome model was edited by :iconz8-0: , it's very fun to build and not too hard - not for beginners, but still average difficulty.
One of my favorite Pokémon, specially since it's a grass starter - they rule!!!

The twig on it's mouth is a real one - I strongly advise adding one to your model. It looks utterly cool!

Time to get back to work, cause I have to finish building another green model, and print and build another one after XD!

Look for Sceptile on :iconpaperpokes: [link] someday (soon?)!
Show
Add a Comment:
 
No comments have been added yet.

Hello Bioshockers!
After all the nice feedback for Undertow i was hyped to build the next vigor of the series.
Here comes Murder of Crows!

I used the original model and texture files to create a lifesized (22cm high) copy of the games vigor.
The bottles plug is of course removable.

downloadable here >> [link] <<
Show
Add a Comment:
 
No comments have been added yet.

Hello again,
after a long session i am finally done with it. Ladies and Gents: Charge.

This was one of the harder models. But i like how it looks.

I used the original model and texture files to create a lifesized (20cm high) copy of the games vigor.
The bottles plug is of course removable.

downloadable here >> [link] <<
Show
Add a Comment:
 
No comments have been added yet.

Hi everyone,

in the last weeks i worked on a new papercraft model. And here is the outcome! It is Kakashi from the well known anime series "Naruto".

I am very astonished how detailed and original he looks. It is like he just jumped out of my computer screen ^_^
Show
Add a Comment:
 
No comments have been added yet.

I built her for a friend. dunno how long she took though.

template by the awesome Sabi96 can be found here [link]
Show
Add a Comment:
 
No comments have been added yet.

he meassures 80cm and has been my hardest build yet. I built him in 160g-paper. the grand assembly made me cry. for real. I mean, it was HARD. I had to go with double sided strong tape on some parts because they just fell off otherwise. but I'm very pleased with the outcome and I'm really proud too.

the hair proved harder than the face even, but I've put it together so you can all enjoy a perfect papercraft War! <3

for the template go here [link]
Show
Add a Comment:
 
No comments have been added yet.

mario!

template by Ignatius can be found here [link]
Show
Add a Comment:
 
No comments have been added yet.

The Animated Series is still my favourite Batman cartoon, and I've been wanting to make a papercraft model of it for years now.

And here it is! You can download the parts and instructions to build your own papercraft Animated Series Batman from my papercraft webpage: [link]

I'll make a New Batman Adventures (with black instead of blue accents and a different Batlogo on its chest) too, so stay tuned and have fun building! ;o)
Show
Add a Comment:
 
No comments have been added yet.

I still think this is the best looking movie version Batmobile. ;o)
Show
Add a Comment:
 
No comments have been added yet.

To make this a fair battle, Captain Redbeard was not allowed to use his flintlock pistol. ;o)

Get the parts and instructions to build your own papercraft LEGO Pirates Captain Redbeard and LEGO Castle Black Knight minifigs (+lots more!) from my papercraft webpage: [link]

Have fun building!
Show
Add a Comment:
 
No comments have been added yet.