Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
Took me a lot longer that I anticipated, But here he is. Grunt from Mass Effect 2, with the biggest toy he could find in Normandy's Armory.

Approximately scaled to XenonRay's other Mass Effect models, for consistency.

Difficulty: Hard

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

The SSV Normandy SR1 from Mass Effect.

This the most gorgeous spacecraft I've ever seen. So i had to make it from paper. I've used some wire to stabilize the engine pods, just under the nozzle joints and trough the main body.

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

The female Blood Dragon Armor from Mass Effect 2 (DLC).

Difficulty: Really Hard

The model is approximately scaled to Xenonray's ME2 paper models for consistency.

Model is in .pdo files, so you will need Pepakura Viewer (its free)
For some reason the .pdo got corrupt if it contained the left hand. So I've made it a separate .pdf. Its the exact mirror of the right hand so the Invert Pattern option in Pepakura Designer is more than able to produce it.

Download [HERE]

Original texture and model belongs to Bioware
Show
Add a Comment:
 
No comments have been added yet.

Tali was the first Mass Effect papercraft I ever made, and at the time a rather ambitious project considering I'd mostly just done N64 and Wii models before. But things just happened to work and it made a template, that thanks to some heavy simplification of the original 3D model, worked surprisingly well. After considering the ever shrinking list of ME characters I'd like to make, and looking at some of their 3D models, I ended up deciding to work on Tali again but in her new ME3 outfit.

For the first time I've used high resolution textures for a model, from Smarteck's HD replacements for the ME3 PC version ( social.bioware.com/forum/1/top… ) and some advice concerning them from DaiShiHUN (he knows why ;P). DaiShi has also produced several Mass Effect characters, scaled to mine so check out his gallery too! ( daishihun.deviantart.com/galle… )

The textures look great and I'm very happy how the overall build has turned out as well! It's certainly harder than the ME2 version so if you are new to papercrafting then I recommend you try that version first. Built between 10th-24th June.

Below you can find the links to download the resources so you can print and build your own version!

Additional notes within the download file and on PDO/PDF #1. Any other questions, feel free to ask.

-------Read Before Downloading------

It's a 92MB RAR file which contains PDFs and PDOs to print from or use as references. ~44.0cm tall, 18 pages and at least 230 pieces including the Scimitar Shotgun.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Just search around! ;)

You can open the PDO files with Pepakura Viewer downloadable free here: www.tamasoft.co.jp/pepakura-en…

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 9/10 (More complex than the ME2 version with a greater amount of fine details)

------------------------

:pc: Download Options:
1. Mediafire: www.mediafire.com/download/ic0…
2. DeviantArt download via Stash feature: sta.sh/02acxnbw3tpu


Note: I sometimes reupload versions with minor edits so for website posters please link back to this page as a 'hub' instead or your download links could end up broken.


Happy building!
--------

Template by me, original 3D data and original textures by BioWare. HD textures by Smarteck.

--------
Other Models
Tali Papercraft Download by XenonRayMordin Papercraft Download by XenonRay Liara Papercraft Download by XenonRay Garrus Papercraft Download by XenonRay Shepard Papercraft Download by XenonRay Javik Papercraft Download by XenonRay
Show
Add a Comment:
 
No comments have been added yet.

The very model of a scientist Salarian! Quite literally!

This is a papercraft template for Mordin Solus from Mass Effect 2. To elaborate, this contains files for you to print off and build your own version with.

-------Read Before Downloading!-------

43MB RAR file containing PDO and PDF files to print from or reference. 18 pages and 211 parts. Included are Mordin in both his default and alternative 'loyalty' textures (I have built the alternate one here) with both lined and lineless versions available. Scaled almost with the other models. In truth he could do with another 1-2cm as he towers over most other characters in game.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Google is your friend!

You can open the PDO files with Pepakura Viewer downloadable free here: [link]

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 9/10 (Construction...*sniff*...problematic. Make sure you have some experience in these things.)

Other notes are that he will probably keep falling forwards. So be prepared to add a ton of weight to his feet, gently bend them backwards or prop them up with something.

---------
:pc: Download Options:
1. Click Download File in the top right
2. Mediafire mirror [link]

-----

Some higher res photos to show the details better:
[link]
[link]

Enjoy!

Template by me, original 3D data and textures by BioWare

Other Models:
Show
Add a Comment:
 
No comments have been added yet.

My 5th Mass Effect papercraft, but the 1st one to use content from Mass Effect 3. Built between the 3rd-16th June.

This is a papercraft template of the female version of Commander Shepard wearing the classic N7 Armour. The model comes with three options for the head. The first is an uncovered head made by simplifying the default ME3 model. If her default appearance or my heavy handed editing isn't to your taste you can build a helmet wearing version with either an open or closed visor. I prefer the helmet version as the face didn't turn out as well as I hoped, plus the head looks small compared to the body.

Follow the download link below to get the resources you need to print and build your own version!

-------Read Before Downloading-------

It's a 39.4MB RAR file which contains PDFs and PDOs to print from or use as references. ~44.2cm tall (helmet version),18-19 pages and at least 267 pieces including the Avenger assault rifle.

You can open the RAR archive with software such as WinRAR, Alzip, 7Zip. Just search around! ;)

You can open the PDO files with Pepakura Viewer downloadable free here: www.tamasoft.co.jp/pepakura-en…

Please do use this as it's immensely helpful as a resource and will show you exactly where parts go. It doesn't work on Macs unfortunately though.

Difficulty: 9/10 (Quite a lot of fine details)

------------------------

:pc: Download Options:
1. Mediafire: www.mediafire.com/?k6xaf6snv4p…
2. DeviantArt download via Stash feature: sta.sh/01i4cj3oyp5e

Note: I sometimes reupload versions with minor edits so for website posters please link back to this page as a 'hub' instead or your download links could end up broken.


Happy building!
--------

Template by me, original 3D data and textures by BioWare

--------
Questions:

Will you make a male Shepard or [insert character]?
For me, my main file has been a female Shepard throughout the trilogy and while I don't dislike the male version (one's my secondary renegade file), I don't 'feel' the same connection or appeal. This is critical for making papercrafts because to work on something for about 2-3 months with several weeks of building requires strong interest in the subject matter. Other squad members could be made in future, though again I have to like them initially. Also I prefer the aliens because human faces are more annoying to edit.

Edit: Sanek94ccol has since made a good Male Shepard template, scaled to this one, here: fav.me/d61kb2x

Will you make any more guns?
Not separately at least. I enjoy making the characters far more. The weapons are a second thought for pose purposes, and a nightmare to edit in any case. Currently all my packs except ME2 Tali contain one weapon template. (Mordin: Predator, Liara: Tempest, Garrus: Mantis, Shepard: Avenger, Javik: Particle Rifle, ME3 Tali: Scimitar).

Shouldn't the helmet have a red stripe?
No. Not in ME3 at least, check it out in game- the top of the helmet is dark grey in the default scheme.


Other Models
Tali Papercraft Download by XenonRayMordin Papercraft Download by XenonRay Liara Papercraft Download by XenonRay Garrus Papercraft Download by XenonRay Javik Papercraft Download by XenonRay ME3 Tali Papercraft Download by XenonRay

Show
Add a Comment:
 
No comments have been added yet.

Liara T'soni from Mass Effect 2. The original papercraft was designed by Xenonray ,and can be downloaded here: [link] .

Despite some parts being difficult (especially fingers), model was very pleasant to build ,and the result is excellent too.
Show
Add a Comment:
 
No comments have been added yet.

Hello papercrafters!Hello 1 of 2Hello 2 of 2 

Here are the final photos of this fantastic model designed by Brandon.

The model is printed on 90gsm paper to 4 pages per sheet, 4 sheets were only required =D (yes I know I'm a greedy with paper Greed) at the end Link measured about 13 cm high without base Choose Me . Also the edges of the paper are colored with acrylic paint to remove white lines Manual labour :painter: , and the model is stuffed with pillow stuffing to give firmness Bench it - remake . For the finish we use matte and glossy varnishes. The base is reinforced with cardboard inside, and varnished with ultra varnish.

I hope that you will like the result as much as I like assemble and detailing this Zelda Link.

As always comments and questions are welcome! Meme (Popcorn) [V1] 
Show
Add a Comment:
 
No comments have been added yet.

Well, what I can say :pokerface: , after a long wait Samus SSB4 by :iconsabi996: is finally complete!HappyHappy  God! I didn't think it would take much time in this project, it's not a difficult model to assemble, but the additions that I did took some time :stare:.
Technical data: Printed on 125gr paper to 6 pages per sheet photo quality, It's filled with pillow stuffing to give firmness inside. 85-90% Handpainted with matte, metallic and phosphorescent acrylic paint Rainbow La . Finally has a layer of matt varnish solvent based applied by brush:paint: . Oops I forgotwhoops , this is the first model I make with paper eyelashes Flirtatious, a changed in the finish which is quite remarkable. And I added some details in the boots which doesn't have the original model ;).
Just a free photos with zoom Eye Zoom.

As always, questions and comments are welcome and appreciated!:happybounce: Happy Squish Hug 2 -  The Eye Poke :badteethhug:
Show
Add a Comment:
 
No comments have been added yet.

Well, what I can say :pokerface: , after a long wait Samus SSB4 by :iconsabi996: is finally complete!HappyHappy  God! I didn't think it would take much time in this project, it's not a difficult model to assemble, but the additions that I did took some time :stare:.
Technical data: Printed on 125gr paper to 6 pages per sheet photo quality, It's filled with pillow stuffing to give firmness inside. 85-90% Handpainted with matte, metallic and phosphorescent acrylic paint Rainbow La . Finally has a layer of matt varnish solvent based applied by brush:paint: . Oops I forgotwhoops , this is the first model I make with paper eyelashes Flirtatious, a changed in the finish which is quite remarkable. And I added some details in the boots which doesn't have the original model ;).

Here you can see a 360° view of model Link icon (more or less).

As always, questions and comments are welcome and appreciated!:happybounce: Happy Squish Hug 2 -  The Eye Poke :badteethhug:
Show
Add a Comment:
 
No comments have been added yet.

so amazing, so epic
source: [link]
Show
Add a Comment:
 
No comments have been added yet.

This is hardest thing i've ever made *O*
But i'm too lazy now to finish "Widow"
source: Legion Papercraft
Show
Add a Comment:
 
No comments have been added yet.

This is first of all six characters from Mass Effect 3 DLC - Earth.
Archive is contains PDO and PDF.
Hegiht - 30 cm.
Unforchantly, this scale is not with XenonRay's papercraft fot now at least.
Thanks arc5555 for helping in unfolding!

Download link - [link]
Show
Add a Comment:
 
No comments have been added yet.

Height - 40 cm
File format - PDO
Download - [link]


All rights reserved by Ubisoft.
Show
Add a Comment:
 
No comments have been added yet.

My new papercraft - Ezio Auditore from Assassin's Creed II
Height - 40 cm
File format - PDO, PDF

Also included texture pack, so you can change color of Ezio's clothes and face.

All rights reserved by Ubisoft.
Show
Add a Comment:
 
No comments have been added yet.

TaliíZorah Vas Normandy Papercraft!

Completed in ~50 hours; [Holy moly!] She is my first Mass Effect model and boy was she challenging. I still have trouble figuring out how to make her stand but after some adjustments, I think I got it down. Or with tape if Iím super lazy haha!

Definitely one of my more challenging models though I believe the Ivysaur is still the toughest Iíve made yet. I will be making Garrus, Mordin and Javik in the near future! Possibly starting on Javik first for my holiday gifting.

I got her papercraft model from this wonderful person

[link]

and he has tons of other awesome models too, should you fancy them! Highly recommend that you have some experience with papercrafting first though.

Happy papercrafting!
Show
Add a Comment:
 
No comments have been added yet.

The papercraft template for Lux, the lady of luminosity, in her classic skin.
When finished with this, she will be at a height of 10in and about 4in wide(the pdo will say 6in, but its just because of the distance that the staff is from her), and there are 163 pieces. Be aware that there are a lot of small pieces to this model.
If you feel like making your own Lux, you can download it here. :pointr: www.mediafire.com/download/8h1… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Lux © Riot Games.

Double rainbow? What does it mean?
Show
Add a Comment:
 
No comments have been added yet.

Riven as her BattleBunny skin from League of Legends, in papercraft form.
The model will be 10 inches tall(without the ears) and about a foot with the sword when completed. There are 141 pieces (about 15 for the sword and 10 for the costume parts) to this on 5 pages.
The template for this papercraft can be downloaded from here. :pointr: www.mediafire.com/download/kb6… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Riven © Riot Games.
Show
Add a Comment:
 
No comments have been added yet.

The champion Caitlyn, the Sheriff of Piltover, shown as her classic skin, now in a papercraft template.
From boot bottom to hat top, she's 28cm(11in), and her gun alone is 20cm(8.6in) long. She is 248 pieces when you include the "extra" pieces.
If you feel like making your own, you can download it here. :pointr: www.mediafire.com/download/cl8… :pointl: The .pdo are also open if you want them larger or smaller than the current size. Any feedback to make it better/easier if you make this would be appreciated.
Caitlyn © Riot Games.

Wanna see a hat trick?
Show
Add a Comment:
 
No comments have been added yet.

These little guys were designed by Momir Farooq and are very fun to build.
Show
Add a Comment:
 
No comments have been added yet.

The Mako from Mass effect and the Kodiak Drop Shuttle from Mass Effect 2.
Show
Add a Comment:
 
No comments have been added yet.

Finally finished the Mako. Fun model!
Show
Add a Comment:
 
No comments have been added yet.

Not much to say about this one, I love how detailled it is

Available on paperzelda
Show
Add a Comment:
 
No comments have been added yet.

Here is another craft, Skullkid. i found this old scrapbooking paper so i used it for the picture, i think it look pretty nice

he doesn't stand on its own tho, he was being held by a small wire that i badly removed in gimp

coming in october on Paperzelda!
Show
Add a Comment:
 
No comments have been added yet.

New craft again, Japas of the Indigo-go
Thanks to Xenonray for fixing the textures of this model
Show
Add a Comment:
 
No comments have been added yet.