Shop Mobile More Submit  Join Login

Similar Deviations
Organized by Artist
I think this may be a first for me. I'm posting this the same day that I finished building it. Normally after I finish building it's usually a week, if not longer before I get around to taking any pictures.

Anyway, the most tricky part on Salamence is its head and especially the extensions on the sides. Once you get past the head there's nothing else to cause much trouble.

With the completion of Salamence the Bagon evolution line is now finished!
Bagon:[link]
Shelgon:[link]

Designed/edited by :iconz8-0:.

Template available on Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

This has taken me far too long to finish but I did have to build it multiple times. The first one I built ended up getting crushed and I screwed up the second one by attaching a part on wrong.

So, finally, here is Muk. Designed/edited by :iconz8-0:.

Template available sometime on Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

Here's sneasel!

There's nothing too difficult about building it. It just has a few small parts, like the claws, that just you just need to be careful on. It might be a good idea to place a small weight inside between its legs or on its belly because the "feathers" on its back make it a little unbalanced.


Thanks to Brandon :iconz8-0: for editing/designing this and letting me build it.

Available on the Paperpokes site [link]
Show
Add a Comment:
 
No comments have been added yet.

Bad light is bad! D:
I think I'll retake the pics once this friggin bad weather will subside, and some natural light will help me out.
Anyway... Version no.2 of Charmander!!! A jumping, merry pose! Loved it at 1st sight. Brandon model, with just a bit of texture tweaking from me. And since I didn't do anything else for the main model, I decided to make a stand myself (can't just sit on my bum and just build! :D I need to be active!!!). Because yes, of course it won't stand on its own.
As usual, you'll find Charmander V2 on our Paperpokés website [link] as soon as it gets a free spot! :D

3D Editing and template by Brandon, aka ~z8-0.
Build by me.
Pokebase: model and textures by me
Show
Add a Comment:
 
No comments have been added yet.

Another water pokemon! :3
It was about time I built this little, spherical guy! Don't you just want to squeeze it? :meow:
Anyway, I think that my next build will be a water pokemon as well... Wanna try and guess? ;P

As usual, you'll find it on our Paperpokés website [link] as soon as it gets a free spot! :D


3D Editing by Brandon, aka ~z8-0.
Template and Build by me.

... *spheal*
Show
Add a Comment:
 
No comments have been added yet.

Yay, finally!!! I was asking Brandon to make piplup since... Eons! ;P
Isn't it super-nice? :meow:
This time the model that Brandon gave me was already almost perfect: I only changed the beak and the head shape a lil bit. Great job Bran! :D

As usual, you'll find Piplup on our Paperpokés website [link] as soon as it gets a free spot! :D

3D Editing and template by Brandon, aka ~z8-0.
Build by me.
Show
Add a Comment:
 
No comments have been added yet.

While I am on Uni holidays, I think I should probably make as many Paperpokés models as I can squeeze in, so here is the latest one.

To be honest with you guys, I really only played Pokémon Red/Blue (and then half of Silver/Gold), so I really am only familiar with the first generation and some of the second gen. This fifth gen just freaks me out - there is an ICE CREAM CONE pokémon!!!

Anyway, with my rant out of the way, I've been after Abra for ages - I think it's just so adorable, snoozing away. I am very grateful to POdragon [link] for whipping this up for me - I'm very spoiled :) Oh, and by the way, this is the shiny Abra texture that I built, the normal was so drab in comparison.

The only issue I can see others having when building this model are the fingers - they are a little fiddly - but that really is a minor detail, otherwise, it's a medium difficulty level build. I have no idea when this will be scheduled, but it'll probably be into the new year.

2011! That's the future! Where's my flying car already?
Show
Add a Comment:
 
No comments have been added yet.

All together now ... "D'aaaaaaaaaaaaaaaaaawwwwww!"

Another round Paperpoké model, but this time it's two for the price of one! And yes, it actually balances on that tail bobble (with the aid of a 5˘ coin), unless there is a sudden gust of wind. I read that the height of this Pokémon was 20cm tall - I guess it would just be the body height, not body on bobble height - so this model is half its "real-life" size.

It's a pretty basic build, the only tip I think I need to give is attach the bottom of the body to the top of the bobble with a drop of superglue, and tweezers are essential for the tail.
Show
Add a Comment:
 
No comments have been added yet.

This was intended for Paperbuff's Birthday earlier this year, but things didn't exactly pan out the way we intended. She would have loved this model so much - it was her favorite Pokémon - and it's near perfect, thanks to PMF.

I know that we have already done this model before, but she was never entirely satisfied with it's pose or it's finished result. So in her memory. we've finally made things right.

This will be available on our website [link] in late August.
Show
Add a Comment:
 
No comments have been added yet.

Ludicolo (8) ludiludi colo (8) ludicolo (8) YEAAAAHHHH babyyy lol... This charro pokemon is fun to build, and it's one of my favorite pokemon. The original idea was buildin' 3 Ludicolo and pic them dancing The Macarena xD but i had enough building just one (Sorry Brandon :P).

Model, obviosly, by :iconz8-0: and someday posted at [link]
Show
Add a Comment:
 
No comments have been added yet.

It's been a while, did u guys miss me???? sure not. But I'm back again with some more models... but posting all of them at once is not my thing. Well, here are the ugly twin fishes Basculin. Models pretty easy to build.

Models by :iconp-m-f: coming someday to be release at :iconpaperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Cresselia, i dunno what to say about this one :P. It's not a new model, i've built this one kinda 4 months ago. Didn't have the time (or brain) to make a good pic of it.

Model by :iconjyxxie: and a built with love to her :3 coming soon at [link] :3
Show
Add a Comment:
 
No comments have been added yet.

Just thought I should submit a proper picture for Pokabu.

available at Paperpokés, [link]
Show
Add a Comment:
 
No comments have been added yet.

Surprise everyone... I finally built something! hehe

Yup it's a Pokémon and if you don't know this one, it's probably because it's not even out yet. Its name is Tsutarja and it's one of the 3 new starters for the 5th Generation games coming this september.

3D model is made by me with the texture made by Lyrin. ( :D )

It can't really stand so I had to make a small base for it. There's some changes that I need to do too before posting the template so it will be posted in a little while on Paperpokés!

also, gotta remember to not take a picture of a green Pokémon on a green background >_<

available at Paperpokés, [link]
Show
Add a Comment:
 
No comments have been added yet.

Finally finished the trio!

available at Paperpokés, [link]

Mijumaru, Pokabu and Tsutarja.
Show
Add a Comment:
 
No comments have been added yet.

Here's Darkrai, edited by Brandon.

It is a fun build, not too hard, though the small parts are a little frustrating. Just take your time to build the fingers and the spikes and glue the bottom with caution, then you'll end up with an awesome model ^^!!

Probably out in Paperpokés [link] in Halloween (that eye staring at you can be scary...) ^^!
Show
Add a Comment:
 
No comments have been added yet.

Time to get out of my lazyness...

Sceptile's been ready for a long time, but I couldn't decide which background to upload it... Lavender took out all of its badassness, so let's try with light blue ^^ Edit: I would add hydrangeas on the back, but Sceptile absolutely loathes hydrangeas...

This awesome model was edited by :iconz8-0: , it's very fun to build and not too hard - not for beginners, but still average difficulty.
One of my favorite Pokémon, specially since it's a grass starter - they rule!!!

The twig on it's mouth is a real one - I strongly advise adding one to your model. It looks utterly cool!

Time to get back to work, cause I have to finish building another green model, and print and build another one after XD!

Look for Sceptile on :iconpaperpokes: [link] someday (soon?)!
Show
Add a Comment:
 
No comments have been added yet.

Finally it's ready!
This one was hard for me, and I didn't think it would stand on its own, but it does. If you resist smashing those claws while you're building them, this awesome papercraft will be ready! I really liked building it in the end.

Thanks to Brandon for editing Scizor in this very cool badass pose. This will be available in Paperpokes [link] probably later this year.
Show
Add a Comment:
 
No comments have been added yet.

Well ~ Last thing for today ~ Both of them was designed by :iconz8-0:

Well well, I build them twice because of my carelessness, pour my drink over the first ones ~ So remember do not bring your drinks to your desk >"<

I know there is a lot of mistake on this but I will rebuild it if need and maybe I will send PP something ~ HAHAHAHA ~ Too much lazy those days :D
Show
Add a Comment:
 
No comments have been added yet.

How about this for Taurus ~ The last zodiac pokemon ~

It will release very soon ~ Next week ~ who know

Look up it in [link]

Hope you like this ~ I have just update it ~ It is the first time I use PTS to decorate it so tell me what do you think ~ Strange - bad or good ~ Even bad comment I will hear all because it help me a lot :D

-----------------------

Design: :iconz8-0:

Build by me :D

P/s: I will submit it in the wild right now :D
Show
Add a Comment:
 
No comments have been added yet.

Yup ~ Altaria is ready

It was designed by:iconz8-0:

Do you believe I build just in 6 hours in one day ~ Am I super ~ HAHAHAHA ~ I can not believe in myseft

As usual, I need to build it twice or three times for making a smoothy model in nolines but this time it is one time. :D:D:D

It is published in [link] soon I donot know just guess when is it published

A picture of Altaria outside will have a winner name on it ~ PP group member donot say it. I say even if you say you get nothing and also another. HEHEHE. Just guess. A little hint it will be released on....... in December or January . All you need is guess which week (Ex: 21.11 - 27.11 , I begin a new week at Sunday ^^)

Try your best ^^
Show
Add a Comment:
 
No comments have been added yet.

After Venusaur:[link] and Charizard: [link] , here's Blastoise :D

This model is quite easy and the pose is amazing :D

The model was edited by :iconz8-0:

I said that Manectric is one of my favorite models, this one s my favorite :D

It will be on Paperpokes [link] sometime in the future.
Edit: It's on paperpokes: [link]
Show
Add a Comment:
 
No comments have been added yet.

Ponyta Papercraft edited by :iconz8-0: built by me and a gift to my great friend that helped me a lot now on a difficult situation :icontoshikun:, thanks a lot for your help :D Bigger hug in the world to you :D

About Ponyta now, really easy model, and I liked the pic a lot XD Don't ask me why XD

Will be released at Paperpokes ([link]) sometime in the future, dont know when XD

Now tell me, aint it cute? XD
Show
Add a Comment:
 
No comments have been added yet.

Zubat and Golbat Chibi and Golbat. The three were edited by :iconz8-0:

Chibi Zubat might ofer some trouble, but not too much and it can't stand on it's own. Chibi Golbat is really easy and cute. Regular Golbat is medium because of the legs, they are small and this one, if you want it to stand, you'll need some weight on the tongue, btw, I love it's pose XD

They all have already been released on Paperpokes: [link]

Have fun building them :D I did.

Btw, I loved this picture, the place where Chibi Zubat stands made it really cute XD And Chibi Golbat seems about to attack someone, really a Halloween model, they all are, even Zubat scares me with no eyes XD
Show
Add a Comment:
 
No comments have been added yet.

YOU KNOW I never put up pictures of Shimama. So I'm using the purty one! Instead of one of my boring photos xD
Shimama model by me;

Shimama (c) Pokemon (c) Pokemon/Nintendo
Show
Add a Comment:
 
No comments have been added yet.

Ha! Posted yesterday over at Paperpokes!
Since posting the arcanine to my gallery a while back, I took his model and revamped him--now his face isn't ugly, his body is much better and he's just overall full of win now.
He was fun to build; his spikes were fun, his tail was fun, his legs were a little tough to figure out. I suggest you refer to the PDO while building him.
Show
Add a Comment:
 
No comments have been added yet.

Lumineon! Very pretty fish. Easy enough to build. Took me forever, since I jump from project to project all the time. 8D

Pokemon (c) Nintendo
Show
Add a Comment:
 
No comments have been added yet.

Victreebel, either you like it or you don't. I happen to think it looks really funny and I like it a lot.

Still awaiting some texture edits to fix the spots.

3D edits by POdragon/Jyxxie ~Jyxxie

Will be released on Paperpokes [link]
Show
Add a Comment:
 
No comments have been added yet.

One of the cuter 4th Gen Pokemons. And there are very few of them. I think the designers of the game has run out of ideas. This one, though, and its evolution, Cherrim, are just plain DAAAAAAWWWWW.

Thanks to POdragon aka ~Jyxxie for letting me build it.

And special thanks to my dear friend ~Skele-kitty for the team effort.

Watch out for it at Paperpokes. [link]
Show
Add a Comment:
 
No comments have been added yet.

I am not sure exactly why I adore this Pokémon, but I really do. Maybe it's because a glare from its single scarlet eye makes even burly grown-ups freeze in utter fear. Or maybe because it is said to spirit away disobedient children. :mwahaha: Whatever it is, I :heart: this Poke.

I've been asking for this one from the Paperpokés designers for quite a while. So guess who was a very happy test builder when PMF finally made one. :w00t:

Will be released at Paperpokés [link] when the time is right. :D

Model designed by PMF ~P-M-F
Show
Add a Comment:
 
No comments have been added yet.