Deviant Login Shop  Join deviantART for FREE Take the Tour

Similar Deviations
Elysia is a ooak (one of a kind) unicorn sculpture, made from polymer clay over wire and foil. She has been painted in acrylic and haired with tibetan lamb fur. Her eyes are an interesting metallic teal, and she's covered in a ton of silver and pearl iridescence.

Elysia is about 4.5 inches long from chest to bum, and about 6 inches tall to the top of her horn. I wanted to try something new with her, and got a bit carried away with the cloud pattern on her sides, but I do like how it turned out.

Elysia is for sale on etsy here: [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

Each kirin foal is completely ooak (one of a kind), made from polymer clay over wire and foil and painted in acrylic. They are about 2 inches long each from chest to bum. Each has inset resin eyes, and tibetan lamb fur for hair. I usually don't work in this scale but wanted to offer foals that were scaled against my normal sculptures. These guys were a lot of fun to do, and I think they turned out very cute :)

Their names are as follows:
Dapple grey: Yare
White and gold: Orphrey
Palomino: Oneiric
Silver Bay: Hyetal
White and silver: Eoan

:star: They are for sale on etsy! [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

Impressive is a ooak (one of a kind) kirin sculpture. He was made from polymer clay over a wire and foil armature, and painted in acrylics. He has brown resin eyes, and his hair is tibetan lamb fur. He stands about 8 inches tall to the top of his antlers, and 4.5 inches tall from chest to bum.

Impressive was a commission, and a fun one too; I haven't done many dark kirins and I had been wanting to do a coppery coloured one for a while. He has more deer-like anatomy, and the taller, slimmer look was a big of a change from the last few goat-shaped ones I've done. The commissioner lives close enough to me that I could deliver him in person, which was also a neat experience. I was quite sad to see him go!

If you are interested in a commission check out my website here: [link] sculptures start at $200.

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]
Show
Add a Comment:
 
No comments have been added yet.

Oannes is a ooak (one of a kind) kirin foal. He's about 3 inches long from chest to bum, and 4 inches tall. He's made from polymer clay over wire and foil, and painted in acrylic. His hair is tibetan lamb fur, and he has light blue resin eyes. I created Oannes in January of this year, but he was a secret gift so I haven't been able to post him!

Oannes was fun to make, I do enjoy making little foals and am hoping to do a few more soon!

Oannes is not for sale, however if you are interested I do have several foals and other things for sale on etsy at the moment: [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

Ekka is a one of a kind griffin thinger, sort of a random personal side project. She's made from polymer clay over wire and foil, and painted in acrylics. I had originally intended for her to be a lot creepier; she ended up super cute! (Besides the weird mangled front feet...)

Ekka is about 7 inches tall and balances on her two feet. She has lots of feathery detail and layers of colour. She was a lot of fun to make, especially since I needed the practice sculpting feathers. In the next few months I'm hoping to do a more traditional looking griffin.

Ekka is for sale on etsy! [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]
Show
Add a Comment:
 
No comments have been added yet.

Eclosion is a OOAK (one of a kind) gypsy vanner unicorn sculpture. He is made from polymer clay over a wire and foil armature and painted in acrylics.

Eclosion is about 5 inches long from chest to bum, and about 5.5 inches tall from hoof to the crest of his neck. He has light blue inset resin eyes, and has been painted to a dappled palomino. His hair is different for my sculptures as I tried something new, using coarse, straight mohair rather than the softer, curled lamb fur I usually use. I wanted to use it for something that was suited for super long hair, and I think he fits it well. I don't know how it would work on a real horse, he'd end up stepping on it!

Eclosion is modeled after a gypsy vanner or cob, in a dynamic extended trot. He has an open mouth with sculpted teeth, and many small details including wrinkles and dapples. I haven't done an open mouth pose in a while, but I like how it turned out.

Eclosion is for sale on etsy! [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

Dianoetic is a ooak (one of a kind) arabian unicorn sculpture made from polymer clay over a wire and foil armature. She is about 10 inches tall to the tip of her horn, and has a body length (chest to bum) of about 5 inches. She has turquoise resin eyes.

When I started making unicorns in 2008 I always did them in super vibrant, iridescent colours but lately have been sticking to natural horse colours. A friend suggested I try something different with this one (I was originally going to paint her chestnut!) and I couldn't be happier with the result. I used interference paint and micro powders so she is super iridescent and changes colours a bit in different lighting. Her hair is a mix of dyed mohair in dark purples, greens, and some blue. She balances on two legs using extra supports that stretch down under the feathering. I've also been practicing indoor photos with some coloured paper, I think it worked out well. The weather has been too gross to risk taking sculptures outside.

Dianoetic was sold before I even had a chance to do proper photos of her, so I'll likely do more unicorns in bright colours in the future! If you are interested in a commission check out my website here: [link] sculptures start at $200.

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

This is an older photo, from January 2013. I haven't shared these before since Oannes (the foal) was a secret gift and I didn't want his new owner to see! Pictured with Oannes is Lilt (lying down) and Arion (standing), two commissions from around the same time. They looked like they fit so nicely together that I couldn't help grab a few "family" shots. It's a bit sad that they all went to different owners!

Each kirin is made from polymer clay over a wire and foil armature, and painted in acrylic. Their hair is tibetan lamb fur and they have inset resin eyes. For more info on each, visit their individual deviation pages:



The kirins pictured are not for sale, however if you are interested I do have several foals and other things for sale on etsy at the moment: [link]

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]
Show
Add a Comment:
 
No comments have been added yet.

Arion is a ooak (one of a kind) kirin sculpture. He's made from polymer clay over a wire and foil armature, painted in acrylic and has tibetan lamb fur for hair. He has aqua resin eyes, and his antlers, hooves, and scales are all iridescent silver. He has a body length (chest to bum) of about 6 inches long, and stands about 9 inches tall to the top of his antlers.

Arion was a commission and is not for sale. If you're interested in a commission, I have information on my website here: [link] sculptures start at $200.

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook [link] or tumblr [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

Ulquiorra is a ooak (one of a kind) kirin sculpture based on a character from Bleach. He's about 6 inches tall and has a 4 inch body length. He's made from polymer clay over wire and foil, painted in acrylics, and has green inset resin eyes. His hair is black tibetan lamb fur.

Ulquiorra was a commission. I am not currently open for commissions for at least 2 years, however I do have several sculptures for sale on etsy if you're interested! www.etsy.com/shop/scenceable

If you are interested in following my sculpture work and seeing progress photos feel free to check out my facebook www.facebook.com/quequinoxart or tumblr quequinoxart.tumblr.com/

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.