Deviant Login Shop  Join deviantART for FREE Take the Tour

Similar Deviations
Shots taken by the new owner. Realized we never had a full 180 shot of this suit and they kindly provided one! Halloween suit from 2012, complete with over 6 types of fur (2 of which are NFT), moving jaw, LED eyes, silicone nose/hand pads, 3+ inch hand claws, poseable tail, and airbrushed details.

Hooves, double point horns, and LED eyes by :icondreamvisioncreation:
Base by One Eyed Doe
Large detachable horns by MagpieBones
Show
Add a Comment:
 
No comments have been added yet.

A fursuit head for Arlesey, of her wolf/aardwolf hybrid, Sable!
The concept for this character can be seen here: [link]

Head is my usual foam on a headliner hood style, with really good front vision and ventilation out of the mouth. The shiny nose style is new, it's foam dipped in rubber, so it's pretty durable and cute :D Hand-sculpted teeth, sewn in cheek spots, fur bangs, and two earrings in each ear are some of the special features of this gal.

I have to say, I'm pretty pleased with the outcome! Photos of the whole partial suit forthcoming. ^_^
Show
Add a Comment:
 
No comments have been added yet.

my personal suit. This is her third repaint. Each time she gets allittle bit better. :)
Show
Add a Comment:
 
No comments have been added yet.

Commission for :iconshineyfighter: for his sergal fullsuit; these are the feet.

4 toed
Reptile feetpads
Large hand claws that have been stained
Cuticles made out of apoxie sculpt
Lined around the edges

Sergals are the creation of Mick39
Show
Add a Comment:
 
No comments have been added yet.

Talk about seeing double... twice! The top two are Liger Zero (very top was made by me, the one below was made by Furbrications) the bottom two are Wolf Link (left is by :iconyuki-moon: and the one to the right is by empirewolf13 on FA that I've swapped the nose on and airbrushed very lightly)

The bottom Zero's body is being used for the Zero on top so the bottom one is for sale. His teeth are now white an any red markings are now black. For a better view of him, watch this video here:

[link]

He's seen in the first half of the video. I will be posting better pictures later. He's a foam base, originally set up with a moving jaw. He was without a helmet when I received him. Vision is through the neck. White saber teeth, bright orange following eyes. I'm thinking only $150-200 OBO as he will need a helmet inside. He's perfect for those wanting to make a quadsuit, but stuck on how to make the head. :)

More shots can be seen of him here: [link]

The bottom RIGHT wolf Link is also for sale as I now have the wolf link on the left and need the room. He was received in a partial and I have been adjusting the pieces as they come in. He's rather well made, vision is through the mouth, and has a full set of teeth.

Since I am receiving him upon a partial trade, the maker and I have agreed to wait until she moves before shipping the rest of him as he is rather large so I only currently have the head and rear feet.

He fits roughly around a 5'2 person, 120 lbs. He's a full quad, I will be making new padding for him so that will be new.

Head can be seen better here:
[link]

Full body shots can be seen in the original makers gallery here:
[link]
[link]
Show
Add a Comment:
 
No comments have been added yet.

Everything upon Sonar is 100% by me. The head and feet are cast resin, body is a plush fur, fleece wings. He's also 100% poseable too!

He was inspired by :iconwormsandbones: fruitbats. I was asked to take a day with the 8-12 year old girls in my church and do a Halloween themed craft so over the past few weeks I've been putting Sonar together to get things made and prepped for the craft with the youth. Due to time constraints, theirs won't be poseable.

Since these were inspired by :iconwormsandbones: , I will NOT be selling these guys as I don't feel its right with them resembling their bats like they do. I may gift or trade at some point, but never anything to make a profit off of.

Sonar still needs a little paint touchups but the overall item is complete
Show
Add a Comment:
 
No comments have been added yet.

A very adorable maned wolf, one of my first official ones! This toon cutie features the following:

Following buckram eyes
static jaw
resin nose
NFT mane
extreme detailed flexi-ears
plush tongue and resin teeth
MM fox rust and white fur
airhrushed features

This suit is also... A PARTIAL! He comes with arms, paws, and a large bushy tail! As soon as I can get some full shots of him I will be posting him up for sale via auction upon Furbuy.com, starting price is $900. Brand new, only worn to test out vision. He/she is a balaclava and foam based head and is extremely light and very comfortable.

Will fit a 22.5 head and a 23 snugly. Any larger heads will need the hood enlarged and/or a zipper installed as this head is a pull on style head.

The arms will fit the following measurements:

Armpit to wrist: 20 inches
Upper arm: 13 inches
Forearm: 12 inches
wrist: 11-12 inches

Hands are a 4 finger toon style, fitting an adult small. The tail is a couple inches shy of 3 feet of pure floof. I have made all but the tail, of which I had purchased from an artist at Indy Fur Con earlier this year; maker unknown.

If someone wishes to buy the partial but will not fit the hands and arms, I will remove $50 from the total cost and send some MM rust in order to make some new ones. The black can be any black fur. I do not have any more time to spare to make larger pieces or feet.

A video and full body shots will be taken when my husband gets home.
Show
Add a Comment:
 
No comments have been added yet.

:EDIT:
Due to influx of offers upon him, I've taken him straight to Furbuy.com!
[link]

Pre-made head I have been working on and off for the past month or so that will be for sale at FCN this next Friday in Detroit, MI. If he doesn't sell at the con, he will be posted up for sale upon furbuy.com

Fits a 23 size head (no larger!) with a pupil to chin of 5 inches. He does have a moving jaw, of which I can't operate as he's too large on me. 6 different furs including an NFT mowhawk. Following eyes, nose by DVC. Foam and balaclava base, brand new. Super floppy poseable ears. Please don't ask how I made them as they are a trade secret.

Soft lined interior and resin teeth top the pup off. Going to be starting the price around $800. Brand new, airbrushed accents, only worn for the video. Comes from a smoke and pet free home!

Wanna see him in action? Here you go!! [link]
(might be a moment while it buffers)
Show
Add a Comment:
 
No comments have been added yet.

I thought it was about time I created (another) doll with horns.. and I really wanted to use some of these wonderful purple fur I just got my greedy hands on... trouble is he ended up so big and heavy... I'm not sure I can sell him - he would cost too much to ship~!! Back to work I go ><

Usual mix of media~ velvet pants.. silk shirt.. leather coat and belts.. etc etc
Show
Add a Comment:
 
No comments have been added yet.

A very adorable maned wolf, one of my first official ones! This toon cutie features the following:

Following buckram eyes
static jaw
resin nose
NFT mane
extreme detailed flexi-ears
plush tongue and resin teeth
MM fox rust and white fur
airhrushed features

This suit is also... A PARTIAL! He comes with arms, paws, and a large bushy tail! As soon as I can get some full shots of him I will be posting him up for sale via auction upon Furbuy.com, starting price is $900. Brand new, only worn to test out vision. He/she is a balaclava and foam based head and is extremely light and very comfortable.

Will fit a 22.5 head and a 23 snugly. Any larger heads will need the hood enlarged and/or a zipper installed as this head is a pull on style head.

The arms will fit the following measurements:

Armpit to wrist: 20 inches
Upper arm: 13 inches
Forearm: 12 inches
wrist: 11-12 inches

Hands are a 4 finger toon style, fitting an adult small. The tail is a couple inches shy of 3 feet of pure floof. I have made all but the tail, of which I had purchased from an artist at Indy Fur Con earlier this year; maker unknown.

If someone wishes to buy the partial but will not fit the hands and arms, I will remove $50 from the total cost and send some MM rust in order to make some new ones. The black can be any black fur. I do not have any more time to spare to make larger pieces or feet.

A video and full body shots will be taken when my husband gets home.
Show
Add a Comment:
 
No comments have been added yet.