Deviant Login Shop  Join deviantART for FREE Take the Tour

Similar Deviations
These results appear less relevant than we'd like. While we're working on improving More Like This, you can help by collecting "Ben10 - XLR8 - c" with similar deviations.
Starting from 25th result Go to first result
Damn!
what a project :faint:
not because of the model itself
it is not very hard
more because of the sidework of the "Papercraft Tutorial" where is use this model for ^^;

to build this model and more to show you how i build it, make this model to something very special :meow:
and i hope you will enjoy building Gomamon as much as i did :dance:

About the Model:
the model comes on 10 pages, with 117 pieces and is about 20cm high

the sheets don't contain the hair
even it was a pain in the ass to peel all the wool in the right direction, is was quite funny (and a huge mess :D )
but trust me and you can see it in the Tutorial
to build all this triangles, i guess it wouldn't make fun :aww:

in my case i use colored sheep wool to build the hair, but you can also use paper, cardboard, plush, felt or whatever
it's hair, it don't look always the same ;P

About the Package:
The download package contains as always
three pdo files
one with folding lines and texture (lined)
one without folding lines and texture (lineless)
and one white with folding lines (white)

also the same as Adobe Reader PDF's
and also the original textures


if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore



some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)
Show
Add a Comment:
 
No comments have been added yet.

oh yeah :D
this was a must build for me
i'm a great fan of this Ben10 franchise
not only because of the story, more because of the whole alien design
specially XLR8 is one of my favorites :la:
as i saw on facebook that there exist 3d models from the games
i just had to do it ^^;

sadly, the one who posted the screenshot didn't or won't :roll: react at my offer to build this model for him
with full credits like i do when i make a collaboration
well, wasn't my problem because :iconodnamra22: Odnamra send me a message with the model
so you people can thank him, that you now can download this model :dance:

thanks a lot man :huggle:
i guess you saved the day for a lot people here :)
include mine :D

editing the model took my a while, specially the hands and legs were a bit tricky
and had i knew that the model is still that hard, i had edit it a lot more :blushes:
that's why i rate this model with 9 from 10
it's really something for experts
i swear and cursed a lot, just to tell you ^^;
there are a lot of backward foldings and tiny pieces which took a lot of patience

that for, please read the "building process gallery" closely before you start
i wrote everything down what could be helpfull for you

also, you can see it, i put a thin acryl pole into the tail
the model DON'T stand on it's own
but that's shouldn't be any problem :D


model description:
the model will come on 20 pages with 188 pieces and is 45cm tall
again, the model is hard and has a lot of tiny pieces
i rate it with 9 from 10
so don't underestimate it

build the tail, head, legs, and arms seperately and combine them later


file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

also for the non windows user
three pdf files
lined, lineless and white

and the original texture

that's why it is that big this time ;)


if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore





some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
Ben10 - XLR8 - b by Destro2kBen10 - XLR8 - c by Destro2kBen10 - XLR8 - d by Destro2kBen10 - XLR8 - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

yes, an other Dead-Space Stamp
a stamp for this game need no tag line, no text ore other things

just the face of the cover

feel free to use ;)
Show
Add a Comment:
 
No comments have been added yet.

as you may know
shit take long ;P
and after the first poor and lazy try of a papercraft tutorial
i'm proudly present the second better version, where i'm gonna explain every single step what i do when i'm build a papermodel out of a 3d mesh :dance:

after meanwhile three years of papercrafting i still can say, it is one of the best hobbys i've ever had and with this little series i wanna show you
that it is not that hard as it looks :)
but also that there is much more work behind as you may know ;)


About the Tutorial:
This tutorial is ground basic
specially the first part, where i am explaining the first steps in Metasequoia
what means, it counts for beginner and also professional 3d desinger
the only thing what you should have is some knowledge in papercrafting
where you start
what is possible to build
and what not

for this tutorial i'm using Metasequoia, a great freeware 3d editor what you can download "here"
if you are allready using an other programm like 3dsmax, Lightwave or Blender, you can of course use one of these
it doesn't matter because the method is the same

i also use Photoshop but every other image editor should do the same
the only thing what you have to purchase is the "Pepakura Desinger"
because only the Viewer is free

About the 3d models:
there are a lot of model sources out there
google is your best friend here
but i will NOT explain how to receive or where you can download 3d game models
that is not the meaning of this tutorial and here starts also the illegal part
why?
to recieve 3d meshes out of games, you have mostly break or rip them and you can imagine, the most developer don't really pleased by that

but as i said, google is your best friend here ;)

ok then, enough talking
let's start with the first picture where Metasequoia is allready installed


Tutorial Overview:
Show
Add a Comment:
 
No comments have been added yet.

OLD SCHOOL CRAFT MISSION 3 - STAGE 3

since Nemesis i'm just a huge fan of this series :la:
and to build this model was just pure fun
the really cool thing
meanwhile there psn released a collection for the PSP :dummy:

oh man, you can't imagine how i'm exited to get this :aww:

about the model:
the model is based on three parts
the center and the two wings
the wings are also based on three parts which have to combined
it was not easy and some pieces are very small
but meanwhile i have a feeling for this tiny pieces :D

sadly, i have to say
this model has been released only for a short time
and is not avaiable anymore
so i can't give you the link, even if i knew some other one :worry: sry


thanks a lot to :icondjp822: for inform me about the free sheets now :)
[link]
enjoy :)

Overview of the Mission:
Show
Add a Comment:
 
No comments have been added yet.

what you see here is not only the evolution tree of Guilmon
it shows also my own evolution after three years of papercrafting :)

from Guilmon, one of my first papercrafts, where i used the lined sheets and doubled-tape
to Gigimon what i build still with scored folding lines
over Jyarimon, where i tested out the shaded crafting method
up to Growlmon, a really great model what i build for the digipapermon blog

and finally Wargrowlmon, my very own model (and the biggest *bleh* ;P )
what i build from ground base (except the 3d mesh)
and when i look at this picture
i defenitly know why i'm doing this
is there something cooler then this? :D

and for all Digimon fans
yeah, i know it's not the whole tree
but
i didn't said that i'm done here :D
Show
Add a Comment:
 
No comments have been added yet.

hihi, i just love this little fellow :meow:

thanks a lot to :iconjyxxie: Jyxxie for letting me build Gigimon as first :huggle:
the mouth was a bit hard, because there are a lot of over 90 folds but allthough it was just a lot of fun :D

i build Gigimon half-size, that it fits more to the size of Guilmon


you can download the model here
Show
Add a Comment:
 
No comments have been added yet.

"Damarus hails from the Mobeth tribe of the Gen Mo'Kai where he's the son of their leader Gik Ma.
Being the leader's son might mean a life of pampering for some, but Damarus won't have any of that and he's dedicated his life to winning the tournament.
Quick and agile, this guy is more about making the finesse kill rather than overkill with heavy weapons. Still, a kill is a kill."


ok, in the first version i wrote i'm proud and happy, well that was not really true.

after quite a month of building NOW i'm proud and happy to bring you this one ^^;
and i'm glad that i can share it with you

Model specifications:
pieces: about 370 pieces
height: about 40 cm (printed on A3)
pages: 19

File specifications:
file size: 61 MB
the download file contains three different pdo's
-one without texture and the folding lines
-one with texture and no folding line (for experts ;) )
-and one with the texture and the folding lines

a more ore less detailed instruction
and a package with 14 different textures

the package also includes the sheets for the lightning gun (you can see it on the picture)

i don't added the pdf files, because every file would be 20MB big, so you need the Pepakura Viewer which you can download here

the pdo files are not protected so if you have the Designer, you can still change the size of the model

to download just click the download button :P

....

anything else?
ah right, i promised you something
why this model is so important for me?

well, let me tell you
let's go a little bit back in time
since the first Unreal was released, i'm a big fan of this series
the story was stunning and something complete different to the other stuff out in this time.
Unreal Tournament, the great competitor to the quake series, was the next step.

in 2002, UT2003 was released and it was overwhelming.
the model design was mouthstunning and never seen before. But there was one race that stood out against the others.
The Gen Mo'Kai
and i swear to you, i never played other chars :D

hm.. i currently noticed, that ut2004 is wrong
but not really, i used the 2004 model
so what else

in 2003 a news drove through the scene
that one guy, you may know him as "radioactiveclown" build some action figures from ut2003

you will find some images here in the DA gallery

you can imagine, as a fan this is "that" thing
but without any creditcard ore other opportunities
no chance
but I've never given up


quite month ago, i registered myself in the nintendo/pokemon papercraft forums and found a thread about converting models from 3d games.
i ask if it would be possible to get one out of the unreal engine
and they told me "yes, but they don't know how"
well, i took the chance and you can see the result ^^;

now, after seven years of waiting, my own Damarus figure stand beside me on my desk and is watching over me :P
even if it's only paper, it's worth more than it could a purchased ever be :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore



other shots:
UT2k4: Damarus - b by Destro2kUT2k4: Damarus - c by Destro2kUT2k4: Damarus - d by Destro2kUT2k4: Damarus - e by Destro2kUT2k4: Lightning Gun by Destro2k


-edit-
send me a picture ore the link of your build version
and i feature it here :)
Show
Add a Comment:
 
No comments have been added yet.

haha i just have to do this shot :D
just to cute :meow:
Show
Add a Comment:
 
No comments have been added yet.

in case of rebuild the big Sinanju Model from Paper-replika.com
the next part for this awesome model
The Beam-Rifle :dance:

like the Axe what i recently uploaded, it's also a redesign from the Playboy Sinanju version

the first two photos are showing the complete new scope
(just if you wonder why there are numbers missing ;) )
i build the scope that way because
well, i mean it's a rifle not a sub-machine gun :D
a rifle need a huge scope
period :D

you can also see this little scope attachment
the original plastic version has that too

i used some wires to combine the small pieces
actually the whole piece is a pipe

IMPORTANT!
to add the "shadow catchers" at the front and back
you have to try out what diameter you need
i calculated with different paperweights ;)

the third photo shows the whole model with the numbers,
just if there are still some questions about that ;)

the fourth is a few hours later with some finished parts

and finally the finished weapon :aww:

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me

IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.