Shop Mobile More Submit  Join Login

Similar Deviations
Concept of standart assault rifle. Actually, It is not 100 percent concept. Idea was to design fictional rifle from these days. To keep proper design as Outline I used profile of ARX-160. Back area is redesigned more then front part. I used built-in silencer as well. Originaly I mentioned to make some black surface with full textures but I changed it eventually. I covered it into this color and exclude textures on body caused it distrupted me. So I painted it by this color and try for "luxury"look.

Hope you like it and tnx for comments.

I did several images. Big views
Front look: [link]
Side look: [link]
Back look: [link]

and photoshots with/without materials (to see model.)
Photoshots: [link]
Photoshots (without materials): [link]

All pictures are better in their own large dimensions. They are available.
Show
Add a Comment:
 
No comments have been added yet.

ELAH - concept of gun


Friend of mine wanted shax gun ([link] and [link]) but with less organic looks. So I changed it into this new concept - ELAH. I also used similar material. I like to make smaller pieces. It doesnt contain large work, result comes out pretty quick and computer doesnt have to consume a lot of calculations so rendering are nicely fast.

Like it or not?


For thouse more interested I also attached following pictures of Elah (Elah 1,2,3 and 4 are in higher resolutions) :

Elah concentration : [link]

Elah 1: [link]

Elah 2: [link]

Elah 3: [link]

Elah 4: [link]


Bye, P.
Show
Add a Comment:
 
No comments have been added yet.

Another day, another job.

Concept of sci fi rifle - Vulcan. I designed it as pair for pistol I did earlier. ([link]) To make contrast, rifle body is made of plastic. Whole collection is meant to be from future but not too futuristic. To keep it believable I used standart scope. While pistol is rough rifle look is clean, shiny and polished.

There are more pictures of this project in my gallery:

Main picture: [link]

Armory picture: [link]

Details picture: [link]

and this time I did also flash movie: [link]



Technical facts: Concepting, modeling and rendering is mine. Model is completely highpoly. I used 3ds max and render engine is v-ray. I tried for "clean" look. Model is based only on various dark materials and shadows. In this concept I did not use textures of material at all.

I'm available for freelance job. I prefer mechanical to organic objects.

Hope you like and tnx for comments if any.

Bye.
Show
Add a Comment:
 
No comments have been added yet.

I'v had busy summer this year so it was long time since I uploaded here on deviantart. But this week I've finished another concept of mine. Here it is.

Concept of sci-fi energy rifle.

Model is fully highpoly, rendered in Vray and some work in Photoshop. I did this concept in two version.

1. savage army camo (this one)

2. shiny black spec ops version. ([link])


P.S.
I'm available for freelancer jobs. If you want to make offer then I'm open for debate.

Tnx for comments if any. Bye.
Show
Add a Comment:
 
No comments have been added yet.

Another piece in my collection. Concept of rifle with integrated silencer.
Code name: HTEC.
Program: 3ds max
Engine: Vray
Model: Highpoly
Objective was to create rifle with breathe of high tec but not from far future. I wanted to design something that looks it could be born in 5 years. I went back to basic rule. Simplicity. Priority was simple design with ”stream line” and aerodynamic feeling. There are 2 version of skin. Rendering is made in color scheme between black and white with few drops of blue. Design, modeling rendering is mine. Hope you like it. Tnx for comment and tnx in advance if you push positive icon down there :)

I uploaded 4 pictures of this. They can be found in my gallery.

side view: [link]
back view: [link]
front view: [link]
photoshots: [link]

P.S.
I'm available for freelancer jobs. If you want to make offer then I'm open for debate.

Bye.
Show
Add a Comment:
 
No comments have been added yet.

Concept of futuristic rifle – P.U.M.A

Another piece on the chain. Classic mag I replaced by two energy canisters on the sides. Canisters can operate independently. There is a way to use left, right or both at once They are mounted by pushing inside and turn 90 degrees. Opposite move will reject them out. Each side has display with info about actual conditions. These information is also transferred to digital red dot scope.

As usual I did it in 3ds max. Vray was my rendering engine. Model is fully highpoly. Concept and whole performing are mine.

I did 3+1 pictures:
1. Perspective: [link]
2. Left side: [link]
3. Front+Back: [link]
4. Art lines: [link]


Any opinion? (Tnx for comment if any.)
(Pls, do not copy my work on other side.)
Show
Add a Comment:
 
No comments have been added yet.

ELAH - concept of gun


Friend of mine wanted shax gun ([link] and [link]) but with less organic looks. So I changed it into this new concept - ELAH. I also used similar material. I like to make smaller pieces. It doesnt contain large work, result comes out pretty quick and computer doesnt have to consume a lot of calculations so rendering are nicely fast.

Like it or not?


For thouse more interested I also attached following pictures of Elah (Elah 1,2,3 and 4 are in higher resolutions) :

Elah concentration : [link]

Elah 1: [link]

Elah 2: [link]

Elah 3: [link]

Elah 4: [link]


Bye, P.

PS1.

I'm here jus for moment. I noticed more people see a problem with bullets inside. Shax and this modified concept - both are meant to be energy guns. There are not bullets inside. When you open shax then its visible there is nothing like barrel in front. Later when I'm back I answer all questions.. Bye.
Show
Add a Comment:
 
No comments have been added yet.

Another piece in my collection. Concept of rifle with integrated silencer.
Code name: HTEC.
Program: 3ds max
Engine: Vray
Model: Highpoly
Objective was to create rifle with breathe of high tec but not from far future. I wanted to design something that looks it could be born in 5 years. I went back to basic rule. Simplicity. Priority was simple design with ”stream line” and aerodynamic feeling. There are 2 version of skin. Rendering is made in color scheme between black and white with few drops of blue. Design, modeling rendering is mine. Hope you like it. Tnx for comment and tnx in advance if you push positive icon down there :)

I uploaded 4 pictures of this. They can be found in my gallery.

side view: fav.me/d4gjivn
back view: fav.me/d4gjjad
front view: fav.me/d4gjj22
photoshots: peterku.deviantart.com/art/HTE…


Bye.
Show
Add a Comment:
 
No comments have been added yet.

Concept of rail gun - Mosquito

I did one concept with foregrip, finally. Basic shape is taken from my previous work "KODO RIFLE" ([link])I also used major characteristic components and re-designed them. More or less. I played more with vray settings. I tried to suppressed material's expressions and colors in order to get play of various shadows. So whole picture consists of variations of black with 1 drop of dark red. There are 2 pictures of Mosquito in ma gallery. 1 basic -Perspective- seccond -left side- with brief descriptions and wireframe. Hope you like it and tnx for comments if any.
Bye.


seccond -left side- with brief descriptions : [link]
wireframe: [link]

P.S.
I'm available for freelancer jobs. If you want to make offer then I'm open for debate.
Show
Add a Comment:
 
No comments have been added yet.

Kiara system - My concept of rifle from near future built of composite plates based on "minimalistic" and functional design. Hope you like it and wait for comments if any. bye.

Dimension: 2048 x 1176

P.S.
Its rifle/shotgun concept. rifle is up and bottom part is shotgun. bad is that I didnt put difference in magazines so they look nearly same which could be confusing...
Show
Add a Comment:
 
No comments have been added yet.