Shop Mobile More Submit  Join Login

Similar Deviations
Here have this while I finish caledfwlch
Download here
Show
Add a Comment:
 
No comments have been added yet.

Rion-Noire asked me about sculpting male pony's nose (check out his cute Dashie custom!)

This is just a quick explanation and one way to make a colt/male pony's nose. Since there isn't a lot of information provided here, feel free to ask questions. I know there are people out there who make the male pony's noses in a different way, this is my way of making it. You don't have to follow this exactly as it's shown. You can make the nose bigger or smaller or whatever you want.

1. Get a pony and a bit of clay
2. Shape the ball of clay so that it looks like a pill or Tic Tac
3. Squish the clay onto the pony's nose
4. Gently push some of the clay to the bridge the nose.
5. Do the same to the sides of the nose
6. Finally, smoothen the front of the nose
Not Shown: Work with the clay until all side of completely smooth and the clay seamlessly forms into the pony. You can use clay oil to do this (before the clay hardens) or sand the nose (after the clay hardens)


I took these pictures in a rush so there are a lot of things in the background. There's a Blossomforth in the back, in the process of becoming a Derpy. There's Soarin's tail and mane to the left. There's a bunch of paints and my working area (which is just an old calender I use so I don't have to scrub the clay and paint off my desk so often).

:bulletgreen: Commission Information
:bulletgreen: Follow on Tumblr
:bulletgreen: Follow on Twitter
:bulletgreen: Like on Facebook
:bulletgreen: FAQ
Show
Add a Comment:
 
No comments have been added yet.

Updated! I'm going through my entire gallery and taking down all the multiple paged models, and uploading a single PDF containing all the pages to help keep things neat!

Assembled Picture

PePaKuRa PDO



If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

NOTE:
This file was made with Pepakura Designer Version 3. It cannot be opened with Pepakura Designer or Viewer version 2 or lower.


If you can't figure out how to download this file, refer to this One-Step How-To Guide




> Assembled Image

> PDF of Pieces




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

A crystal sword! I'm all about swords!
My first papercraft wuuuu
template here: [link]

Edit
I've added a texture to the pdo and made it lineless
here's the template: [link]
Show
Add a Comment:
 
No comments have been added yet.

Bugs Bunny from Looney Tunes in Cubee form!!

Just click on the download link to download the pattern. Then cut out the shapes and construct (no tape or glue needed!!).
Show
Add a Comment:
 
No comments have been added yet.

EDIT: Difficulty LVL HIGH (First timers might not want to attempt this one. Note stencil works best on LARGE Pumpkin due to all the small edge work. Also an X-acto knife it recommended for fine details.

Another year another pumpkin. Heh, after the Unleashed game and the 3D short "Night of the Werehog" I couldn't pass this up. Not too happy with how his hand came out but oh well. He will still make for a awesome Jack-O-Lantern this year =D. Tutorial on how to use this bad boy stencil here [link] . Enjoy ya'll.

Edit 2: Photo of pumpkin [link]
Show
Add a Comment:
 
No comments have been added yet.

The Original "High Poly" Aku Aku (Naughty Dog's model) from Crash Bandicoot 3 and CTR retextured by Vicarious Vision.
Model Ripped and Designed by me.

A4 format :
Height: 380 mm
Width: 248 mm
Depth: 111 mm

A3 format :
Height: 599 mm
Width: 392 mm
Depth: 175 mm

A4,A3 Format + pdo file (open it with pepakura).
Show
Add a Comment:
 
No comments have been added yet.

This is even bigger and badder! ;)

I was hoping to cram all three characters into Part 02 but there just wasn't enough room! X_X;;

Took me half a day to do this, I hope it helps out those who just want to go that extra mile in improving their drawing of a favourite character in the comic series. :)


:bulletblue: Let's Draw Sonic Archie! Part 01 (Introduction!) :bulletblue: Let's Go!

:bulletgreen: Let's Draw Sonic Archie! Part 02 (featuring: Sonic & Tails!) :bulletgreen: Let's Go!
Show
Add a Comment:
 
No comments have been added yet.

Hey! Check it out! XD I'm submitting something.

Well, this has been sitting on my desktop for ages... so I decided to clean my desktop, and while I was at it, submit some random stuff.

This started out as random boreddom. I was attempting to re-create an image, to use for 3D modeling. For Shadow's eye. Eventually, I recreated his eye. ... It's scary. o_O; Anyway, so I decided to try and make other characters' eyes.... so I made them all!

...well, Espio at least. I forgot Charmy and Vector. >;P For some reason I thought they all had the same eyecolor.

Anywho, I have Sonic, Tails, Knuckles, Amy (I made hers slightly different, for some reason...)
then Shadow, Rouge, Cream, and the "Chaotix" (espio) eyes.

Vector has a sort of redish orange, and Charmy has eyes that gradient from yellow to Red. I may add those later... In the mean time..

These are "open source". In other words, you can use them for whatever you need. Image textures for 3D Models, etc... help with coloring... tadah!
Show
Add a Comment:
 
No comments have been added yet.