Shop Mobile More Submit  Join Login

Similar Deviations
This is my Cosplay of Isaac Clarke, from Dead Space 2 as worn to MomoCon 2011. The entire suit of armor was handmade using expanded PVC foam (Sintra) and then hand cut, shaved and hand painted. Both the RIG and the helmet were also completely handmade, free hand, and powered by electroluminescent lights. The "Hand Cannon" foam finger was crafted from a block of foam that I cut to shape and painted.
Add a Comment:
No comments have been added yet.

A Pulse Rifle from Dead Space videogames. It's made with MDF and PVC basically. It have a PCB to light LEDs and make sound when you push the trigger and have a 3 laser pointers. Like the game's model :D

Note: I had problems with time and materials, and the back of the rifle is different that the original.
Add a Comment:
No comments have been added yet.

This is a re-release of the NSP.
While the first release was handmade, this version is vectored for a more consistent level of quality.
There are also several design changes:
1. There is no more rear top box. Instead, this part, the breech face, is now part of the slide.
2. The pistol is now chambered in 9x19mm, to accommodate the thin barrel.
3. The takedown latch is now a slide catch, and is thinner, but remains non-functional.
4. There is now a (cosmetic) magazine release.
5. Overall dimensions are slightly more compact.

Download Link (MediaFire)

PDF Version (MediaFire, printouts only)
Add a Comment:
No comments have been added yet.

My first cosplay : Isaac Clarke Dead Space
Thanks for the help Florian and my father <3
Add a Comment:
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee: :hooray:

should i say something more :D
for all who followed me the last time
you can imagine how happy i am, that this gigantic project is finally done
three months (pure building time) of work are over
it was hard, it was frustrating but all in one
it was just worth :aww:

seeing her standing on my desk is just a satisfaction for all the work i put in
quite every edge is recolored to hide the white spots
i put so much soul into this project that i believe
a bit more and this model would jump right from my desk :D

but enough talking ;P
let's see what you will get here

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want :)

the package also contains the original textures

model description:
the model come on 52 pages with 520 pieces and is 60cm tall

i have to say this too
this model is hard
really hard, believe me
rate 10/10
you have to improvise a lot, so think two times if you really wanna build it :)

this time i wrote a lot of footnotes
more then usual
read them closely and you should have no problems

you should take a look at the building process gallery of the big sister
there are a few parts where i explain how this and that is working

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers

you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!

and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
BioShock 2 - Bigsister - b by Destro2kBioShock 2 - Bigsister - c by Destro2kBioShock 2 - Bigsister - d by Destro2kBioShock 2 - Bigsister - e by Destro2kBioShock 2 - Bigsister - f by Destro2k
Add a Comment:
No comments have been added yet.

"Make us whole"

The second and probably last necklace on the dead space series I'll do, planning to make a ring as final piece to it. Material is Silver and it has engravements on both sides of the necklace. Hope you guys like it! enjoy!
Add a Comment:
No comments have been added yet.

Helmet that isaac clarke wears in Dead Space 2.

This was done for my friend's birthday. we will install the lights/visor together since i didnt know where it would sit on her head and where she will be looking trough
Add a Comment:
No comments have been added yet.

So there,its pretty much finished building.
I just need to rig up some LEDs for the barrel and do the trigger. Im also hesitating on its final form,as the prop model and the in-game model have different visual details,such as an aiming reticule and some bits in other areas.
Its mainly cosmetic,but i'd still like to get it to look right :S

Add a Comment:
No comments have been added yet.

A continuation of my pocket-sized videogame character series :D

(Here's my first one of the DS1 Engineer RIG:… )

For Dead Space 2, I decided on the model used for the Security Suit since it's essentially the same model used for 10+ other suits...

Shown here are the Security Suit, Zealot Suit, and N7 Suit (from DS3). And I will definitely be doing versions :D

Hand cast in resin, these figures are 3.5" tall and hand-painted. 

They're also up for purchase in my shop.

Some other shots: Zealot Suit | Security Suit | N7 Suit

Add a Comment:
No comments have been added yet.

Just in time for Dead Space 3!

Sculpey painted with acrylics.

3.5 inches tall.

WIP shots.

Here's one of Commander Shepard :): [link]
Add a Comment:
No comments have been added yet.