Shop Mobile More Submit  Join Login

Similar Deviations
in case of rebuild the big Sinanju Model from Paper-replika.com
the next part for this awesome model
The Beam-Rifle :dance:

like the Axe what i recently uploaded, it's also a redesign from the Playboy Sinanju version

the first two photos are showing the complete new scope
(just if you wonder why there are numbers missing ;) )
i build the scope that way because
well, i mean it's a rifle not a sub-machine gun :D
a rifle need a huge scope
period :D

you can also see this little scope attachment
the original plastic version has that too

i used some wires to combine the small pieces
actually the whole piece is a pipe

IMPORTANT!
to add the "shadow catchers" at the front and back
you have to try out what diameter you need
i calculated with different paperweights ;)

the third photo shows the whole model with the numbers,
just if there are still some questions about that ;)

the fourth is a few hours later with some finished parts

and finally the finished weapon :aww:

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me

IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

you maybe allready know this part

i know it's "not the original beam axe what's hidden behind the shield"
i have to say
i don't give a shit :D
all the work put into this, from the resize, redesign and recolor was just worth :dance:
but it's not only an axe, with a little special it can be morphed to a spear from 50cm to 65cm

the other thing, the original design is just really cool and totally open

when you print the pages a few times, you can build two weapons or on one side two big blades and on the other two small and waht not, it's up to the builder :meow:

but anyway
now to the morphing system
through the resize i had a little problem
the original staff is one page tall and i had to think about what to do
so i decided to cut that piece into three different and build it
like an antenna

here you can see my building process
first i build the three pipes (these are the hardest parts by the way ;) )
and cut some long paper stripes
then i wrapped one stripe arround at one side first until it fit good into the bigger pipe
you have to test it out how much you need
cut a stripe with the same lenght but don't attach it to the other side

then do the same but at the inside of one of the bigger pipes

now the system should be clear
stick the thin pipe without the attached stripe into the big pipe from the other side until you reach quite the end

then through the second bigger pipe at the side with the attached stripe at the inside

push this also quite to the end
now add the stripe at the thin pipe
and done ;P
sound complicated i know but it's really easy :)

then add the two red pieces to the staff and the top part
i allready combined them but it's up to you :)

and step by step the final axe is done :)

about the sheets:
because this time it's a recolored version
the sheets are coming as pdf
just click download at the top :)

the original design belongs still to playboy
redesigned and recolored by me


IMPORTANT:
THIS MODEL IS FREE AND SHOULD IT BE
SO LET IT BE!

Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

These are Barbie scale Warhol Brillo Boxes built out of cardstock. Silly me. ;) Build some for yourself --> [link]
Show
Add a Comment:
 
No comments have been added yet.

If you still remember those old video storage devices, you can work out the size of my new papercraft Star Wars TIE-fighter! ;o)

Although I'm a big sci-fi fan, this is actually the first Star Wars papercraft model I made myself!

I drew all the parts by hand, and coloured it using aquarel, which makes it look really nice I think. ;o)

I also made an interior for the command pod, and although most of it really just stems from my imagination, I really like the way it turned out. ;o)

The wings can be removed for easy storage, but you can also permanently glue them to the pylons if you want to of course.

Parts and instructions to build your own papercraft TIE-fighter are available from the new Star Wars section on my papercraft webpage: [link]

Have fun building!
Show
Add a Comment:
 
No comments have been added yet.

Fenrir Keyblade from Kingdom Hearts 2. Oh man, I loved this keyblade, it was like a trophy, after defeating Sephiroth I think tifa gives it to you on...Hollow Bastion? or was it Radiant Garden? I should replay the series.
Anyway, The links!

4Shared:
[link]

Megaupload:
[link]

Kingdom Hearts is ⓒ Square Enix & Disney.
Show
Add a Comment:
 
No comments have been added yet.

Custom Tooled Trilobite leather bracers. They were actually very small (about 5" tall) so the tooling was somewhat intricate in the end.
Embossed shape a bit.
Show
Add a Comment:
 
No comments have been added yet.

Custom leather bracer designed with buckles and Assassin's Creed emblem. Fully water-hardened and sealed against water/sweat.

7oz vegtanned leather
bison brown eco-flo leather dye
silver acrylic

Custom bracers like this available on my etsy [link]
Show
Add a Comment:
 
No comments have been added yet.

Updating after a long absence. Torterra' been ready for a while, but I still haven't found the right scenario for a pic, so this will do. One of the coolest poké I ever thought I'd build. Helping building tips are found in my journal. Thanks a lot to paperpokes team, specially Brandon and PMF, who made Torterra survive some sort of computer crash!

That tree just asked for a pokémon on it. I'm so glad my Pikachu has a proper size, yay ^^.
Show
Add a Comment:
 
No comments have been added yet.

If you would like to have a gauntlet like this they are available on Etsy! www.etsy.com/listing/125835555…


I made this gauntlet as a personal project for the Steam and Cinders Winter Feast tech contest. The hand and wrist are articulated allowing me to retain my full range of motion. The purple sections are translucent and will have LEDs added to them in the near future causing them to glow an eerie dim purple.

Now that this gauntlet is done I am thinking it is time to start making more gauntlets with hand coverage and maybe start working towards articulated fingers.


The bracer is made from 8 oz veg tanned leather, sheet brass, brass rivets, brass studs, ecoflo dyes and finishing products.

Also! You should visit me on Facebook! www.facebook.com/SteamViking

Want your own custom gauntlet?  Visit me on Etsy! www.etsy.com/listing/210585927…
Show
Add a Comment:
 
No comments have been added yet.