Shop Mobile More Submit  Join Login

Similar Deviations
Dude, I don't even know. It was like 3am. Cat Vader- it made sense at the time.
Show
Add a Comment:
 
No comments have been added yet.

The original drawing belongs to viria13
PSD. coloring: fav.me/d6cogi3 fav.me/d6bebhu

:rose: Si tienes alguna critica/opinión que quieras hacer, hazla. Me gustaría oír sus opiniones para mejorar al editar

My Tumblr iara-ah.tumblr.com/

Atte: Iara AH


Show
Add a Comment:
 
No comments have been added yet.

After some weeks ago i intensively browse pixiv, i decided to try make a space-type mecha. With a little touch of Japan styled mecha.

I could possibly add this mech later to my TCG project with my friends. It is unnamed yet. the definite armaments are one medium ranged riffle and one extended range laser saber.
Show
Add a Comment:
 
No comments have been added yet.

Yay! It's finally finished!

Many thanks to all of you that have sent in your own versions, I really like seeing them :D

Happy Halloween!
Show
Add a Comment:
 
No comments have been added yet.

Another Gundam request, this time it's Gundam X Divider. Not a big fan of Gundam X, but it helped my with some of my techniques.
Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

now then let's take a look at the legs
there is a lot of stuff what you need here and at the end it was quite frustrating
at the first five screenshots you can see again what pieces you need

the foot
the inner structure for the leg
the outer structure for the attachments
outside shield and inside shield

for the inner structure you have to combine the black pieces at page 14+15 wich each other

the four pieces of the outer structure are a bit complicated so i made a few photos how to combine them without any great problems

piece overview 1
when you're done you should have this pieces

po2
add the inner and outer shield pieces at the outer structure before you put them over the inner structure
the inner shield has no connector, just attache it directly

po3
combine the red and black spike
and add the inner structure to the feet

now just put the outer structure over the inner ones
AFTER THAT add the spike combo

finally add the red piece at the top
and you are done :)
Show
Add a Comment:
 
No comments have been added yet.

:3
Show
Add a Comment:
 
No comments have been added yet.

I drew this picture originally in ink, but I used a terrible pen for it, causing horrible scratchy lines. So this is the retouched version. Hope ya like.

[Edit] This piece has sold. 5/11/2012
Show
Add a Comment:
 
No comments have been added yet.

again a part with a lot of pieces :aww:
the first five screenshots are again the pieces which are for the hip

i promissed that i make a few photos of this boosters
well, these are a bit more complex as the others but base on the same technique

first i cut them out and build the single rings
i also removed the tabs for the inside ring
quite useless for me
at the fourth photo you can see the final pieces
because the sheets are designed for colored cardboard paper there are no tabs for the bottom piece where the peak as to be attached on
so i just colored a little paper piece with black marker and glued it on top (you can see it at the left piece)

then i put some glue at the inside of the tube and put it on top of the inside ring
after it's dry, i add the peak
quite simple, if you know how it works ^^;

piece overview 1
as always, here are all pieces what you need for the hip

po2
again one of those problems when you work with normal paper
to combine this pieces i just add a little tab at the backside and cut two lines into the base piece

po3
this one took me really long to figure out
first i thought the smaller piece has to be attached to the hip base but that doesn't work
because the black flat pieces where all the parts has to be attached fit exactly to the hip base
so this was the only solution

i scratched the color where this pieces has to be combined

po4
lego is just boring against this :D

po5
and e viola
the final hip :meow:
Show
Add a Comment:
 
No comments have been added yet.