Shop More Submit  Join Login

Similar Deviations
and the next awesome model is done
:iconvictorydanceplz: :hooray: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

that's the reason why i just love this shit so much :D
and i just knew it would be cool :dance:

as i saw this model for, well, meanwhile also over a year ago ^^;
i just had to ask :iconsanat49: sanat49 for it
and i'm very thankfull and proud that he spend his original mesh for a papercraft project :huggle:
Crock by sanat49
the cool thing about this model is, that it's an entry for the pre-DominanceWar V competition, where i'm also a huge fan of :la:
what made this model, not the first Dominance War Papercraft, but the first downloadable (ironic hint to an other crafter ;P ) and hopefully definetly not my last ;)
...
but that's up to the 3d designer ;)


ok now, back to the model
the last steps, where you have to combine all parts will be exhausting
specially for the big shoulder armor pieces
there is not many space for glue or failures so be patience
test it out first where you can attach the pieces

also you have to put some weight into the rear leg or maybe both
maybe you noticed also that i attach the model a bit displaced at the pedestal
i had to do this because of the weight ratio
it's a lot testing and trying
so don't hurry ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included

model description:
the model come on 27 pages with 290 pieces and is 30cm tall

the model is actually not hard but the mouth take a bit more work as i thought
also the first three rings of the arms
the skulls and bones of the pedestal are very small but it's up to you if you wanna build them
i removed the lower site of the pedestal, it is too big for one page
but just glue the whole thing at a blank sheet and you have the same effect ;)

difficult level is about 7/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore


some words to the bloggers




because this is a collab, you have to give credits to :iconsanat49: sanat49 too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use his renders ore screenshot of it
except he allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)


other shots:
Crock - b by Destro2kCrock - c by Destro2kCrock - d by Destro2kCrock - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

Finally finished this Gundam! can't believe I started with this project last year! haha, anyway, I've introduced the "Background colour" to this model because there were some annoying white pieces over the model which would look better with it.
Also included the possibility to build Open and/or Closed wings!
Test build was made by :iconairasumi: as well as the photographs!
The .rar contains: 9 PDOs, 9 PDFs as well, 21 Pages for the model (If you build only 1 pair of wings)

4 Shared:
[link]

Mediafire:
[link]

RapidShare:
[link]

And the Instructions are here:
[link]

Gundam is ⓒ Sunrise/Bandai/Sotsu Agency
Show
Add a Comment:
 
No comments have been added yet.

by uploading this files
i can say i feel happy, proud and honored
happy that i finished it, of course :aww:
but proud and honored, that i had the chance to build it

with this model i finished my first collaboration with an other dA member

ok, i know you all wanna download as fast as possible the model sheets, but i write this anyway, because it means a lot to me.

in the center of 2010 i started to ask some 3d artists about their models and if they would share it for a papercraft project.

i recieved a lot rejections but :icongriphinator: Griphinator was the first who agreed and send me the mesh of his Spidertank
:2010 03: AI Spidertank v.3 by Griphinator:2010 03: AI Spidertank v.2 by Griphinator:2010 03: AI Spidertank by Griphinator

so give him a big hand too :)

well, i had a lot of problems in the last part of the year and it took a bit longer, more that i expected
but finally
i...... we can bring you this :)

and i guess, not even Griph expected that rotating system of the top :D

But this model has also another important background for me
not only it's a very cool mecha design and a reference for upcoming collaborations
i hope it's a wakeup call for other 3d artists, that there are freaks out there with a lot of skill, who would love to take your visions into reality ;)

ok, but now to the model :D
with downloading this file, you get three pdo's

one with folding lines and texture (lined)
one with folding lines but without texture (white label)
and one without folding lines but with texture (lineless)

so you need as always the Pepakura Viewer which you can download here

the lineless version is hard, specialy when you reduce the objectivity of the cut lines

i printed the sheets with 20% objectivity and it was not easy

the pdo's are not protected, so you can still change the size with the Pepakura Desinger

because it's an OC of :icongriphinator: Griph you will NOT get texture this time

the model comes on 12 pages with 68 pieces

some word to the bloggers


ok, normaly i'm mister nice guy
but this is important for me
because this is a collab, you have to give credits to :icongriphinator: Griph too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use the renders of Griph
except he write it here in the comments ore you ask him about it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!


to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore



and trust me, i search for my stuff ;)

if you wanna write a critique
feel free
but don't critique the model itself

-other shots-
Spidertank - d by Destro2kSpidertank - e by Destro2kSpidertank - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

again a part with a lot of pieces :aww:
the first five screenshots are again the pieces which are for the hip

i promissed that i make a few photos of this boosters
well, these are a bit more complex as the others but base on the same technique

first i cut them out and build the single rings
i also removed the tabs for the inside ring
quite useless for me
at the fourth photo you can see the final pieces
because the sheets are designed for colored cardboard paper there are no tabs for the bottom piece where the peak as to be attached on
so i just colored a little paper piece with black marker and glued it on top (you can see it at the left piece)

then i put some glue at the inside of the tube and put it on top of the inside ring
after it's dry, i add the peak
quite simple, if you know how it works ^^;

piece overview 1
as always, here are all pieces what you need for the hip

po2
again one of those problems when you work with normal paper
to combine this pieces i just add a little tab at the backside and cut two lines into the base piece

po3
this one took me really long to figure out
first i thought the smaller piece has to be attached to the hip base but that doesn't work
because the black flat pieces where all the parts has to be attached fit exactly to the hip base
so this was the only solution

i scratched the color where this pieces has to be combined

po4
lego is just boring against this :D

po5
and e viola
the final hip :meow:
Show
Add a Comment:
 
No comments have been added yet.

oh yeah
my first SD Gundam :boogie:

two weeks of chilled work are done
and it looks really cool :)

i was a little bit worried, because the SD Gundams have a complete different model design as the pepakura models

but after a few parts i noticed how "genius" this design is.
the most parts are open and very easy to handle.

if you have three ore four cross tweezers you can build this very quick and get a page at one day done.

also the cool thing on this models are the model parts itself.
you can remove the head and arms, the wings, the weapon and the shield and pose them in an other way.

but the important thing is the instruction
i downloaded a few other SD models but they have none
so you have to figure out which part must be connected with the others

this one comes with a very nice and detailed one, so you will have no problems and it's also a good start into the SD series :)

if you wanna try Rocky (nickname of the model) on your own
feel free and download it here [link]

P.S.
you need the backpack page 3, three times

-edit-
by the way
a big hug :hug: to :iconelengwat: Elengwat for the idea with the border :w00t:

-edit-
lol, just crazy :D
as i went online, i found a note from :iconepill: epill in my inbox about the gundam and that i don't should get mad

well, mad yes, but in a good way ;)
he made a vector picture out the photo which is just awesome.

but take a look on your own.



thx a lot man, i really appreciate that :hug:
Show
Add a Comment:
 
No comments have been added yet.

well, honestly, i don't know what i should write :confused:
maybe i didn't realized that i'm finally done with this model.

it takes a horrible long time to build and sometimes i was about to give up, but after more than two month (effective building time) i can share this pictures with you :)

Fazit:
the best decision was, to print the sheets on A3, because this model takes me to the limits and you should have a little bit more experience for this.
the most parts are quite easy, but some pieces are hard as hell.
you can see it in the "building process gallery"

specially the backpack was that part, that gives me more then one headache :D

but it was a challenge that I gladly accepted
because this model is really unique and definitely an eyecatcher in every shelf ore something else.

the guys from "Just Paper" did a great job on this and if they ever decide to create an other one, i would build it too ;)


IMPORTANT!!
permission for upload given through NCsoft
pls read this journal entry for more infos

the sheets are free and should remain so
pls download and use them only for personal use
otherwise i must remove them

Exteel & Sidewinder are trademarks & copyrights by NCsoft
Model created by Just Paper


to download the sheets


just click on download above ;)

-other shots-
Show
Add a Comment:
 
No comments have been added yet.

since i made the desicion to rebuild the whole Sinanju model from paper-replika
i thought also about to build some weapons
the problem, even there are exist some in an other Sinanju version from playboy, there is no instruction how to combine all the pieces

well, actually it wasn't really hard, the hardest part was to build them, specially from the axe
but i think the result speaks on it's own, and i hope that these picture help that others can build this cool things too :)

the next step is to start resize, recolor and rebuild the pieces a bit, that the weapons fit for the big version, some are really ugly designed and very heavy :worry:

i printed the sheets on A4
they are white because the sheets are designed for colored paper
the axe is about 40 cm tall
the beam rifle about 30
the sheets are available here

the beam rifle comes on two pages in an extra pdf
you can find the axe at the pages 2,21 and 36
the pieces are declared as A_xx

have fun :)
Show
Add a Comment:
 
No comments have been added yet.

here we go
finally done :icontardboogieplz: :iconvictorydanceplz: :icondweebdanceplz:

man, this thing took just freaking long :faint:
when i imagine that the plan was, to build this in my three weeks vacation (last year :D ) and meanwhile a half year is gone since i started the boosterpack :D

ok, i had a few breaks, one with Renamon and a few others
so the pure building time was about two months
but also a long time :aww:

i have to say that i don't have any clue about Gundam Wing/00/Zero ore whatever which series is called
i know about the Gundams and love the mecha design (specially this one because of the wings) but never saw one part so don't bother about the name ;)


ah, big mechas with wings
i just love this shit :la:


even the sheets where not the best (they are very pixelized)
i'm totally pleased with the result
but during the building and right now i can say, it's definitely not a starter model
i had to modify a lot of stuff and quite every blue and grey edge is recolored to hide the folding lines
but all over is was pure fun :meow:
and...
surely not my last Gundam model ;)
the next one is allready planned

what's left to say
ah right :)
you can download the sheets here
also i wanna refer you to my building process gallery
just if you may stuck ;)

-other shots-


and a little special one here ;)
Show
Add a Comment:
 
No comments have been added yet.

as i started this model
i knew it will be hard and it will take long
longer as anything else before
but seriously, i never thought that it will took
over seven months to finish

and not seven months of lazyness, like the editing and unfolding process
no
seven months (4-5 hours quite daily) of pure hard work
seven months of anger, sadness, depression, distressing, love, fun and joy :w00t:

i took quite everything into this wonderfull piece
i tested out some new techniques of building
gain a lot of new experience and discovered some new crafting skills

i build into the night, rebuild the 3D model to get the stabilizators (ok, not that hard but cool technique)
and figured out how i can get a 3D effect with clear coat
what looks just cool :dance:
like this special edition artbook from CD's or DVD's

and I think I can say without inordinateness
this is my personal masterpiece :squee:

when i look at it, it was worth every freaking second
and that's it all about
building something out of nothing
with your hands
what you can be proud of
i trust me
i'm fucking proud of it :iconvictorydanceplz:
i get a huge smile everytime i came home and see it
my friends meanwhile think, i'm totally nuts because i spend so much time for it
but there mouth was falling down as they saw it :D

i just love this stuff :D
and i love :iconhaikai13: haikai13 that for, that he made this possible for me :heart: :cuddle:
that's why i don't understand why some people just release the pdo's
i mean
why I'M doing this
because I want the model

i mean it's awesome to see that other people are building your stuff
Renamon, Wargrowlmon, Yoshi, the Dead Space Marker, the Clap-Trap
you know i love you all that for
but please
you can build it after i did :D :heart:

ok, now to that what you get
with download this model
you get freaking piece of insanity
with a difficult level from 12 of 10
yeah i know
*that is not working*
but let me tell you
it is hard
really hard
hard as fu*k

so take a look at the building process gallery first
if you really want to start it

but now seriously

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are protected
so you can't edit the sheets in the designer
it has some reasons why i did it this time
i also doesn't includes the original texture

model description:
the model comes on 100 pages with over 700 pieces and is 60cm tall and 1000cm width

to download the model
click on the download link over the
"more like this" thumbs on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

also because it'S a collaboration
you have to give :iconhaikai13: haikai13 some credits too

and like always

this model is free and should it be
so let it be!



and trust me, i search for my stuff ;)

feel also free to write a critique :)

if you still have any questions
ask me anytime :w00t:
also at my facebook Profiles
www.facebook.com/dominik.kempen
or
www.facebook.com/Destro2ksCraftingbox ;P


other shots:
Avian Defender - b by Destro2kAvian Defender  - c by Destro2kAvian Defender - d by Destro2kAvian Defender  - e by Destro2kAvian Defender - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

and it goes on :)
man, this step took me really long this time
but it was worth, the result looks just sweet :dance:

as always you can see the pieces of the chest-hip combo

the chest itself
the front attachments
the shoulders
and the pipes of the hip
(i didn't add this pieces the last time, because there were already enough ;) )

this time i made no piece overview of the pieces because the chest itself is based on just six pieces
the interesting part here is how to combine the shoulders to the torso

on page L and you can see it in the 3d view
there are two cylinders in the chest as an inner structure
i had no clue how i should build that so i made it my own way

first i changed the tabs and glued the cylinder inside of the outer chest parts
then i made a tube what fits into this cylinder and combined them with the shoulder parts

sadly i can't tell you how big this tube should be, it's something what you have to test out :blushes:
also you have to look out that you get the right lenght, angle and stuff

the next photo shows an idea from a facebook friend
he suggested i should try to build a moving system for the chest-hip
it took me bit to figure out the right height and diameter of the tubes but it works very well
...
even there is no space for movements ^^;
i will explain later

but it's a good way if you wanna build an other SD Gundam to get a bit life into this static models :)

by the way, the bigger tube has to be on the bottom (left piece)

the next photos
the "golden" front attachments
and the side pipes

the original pipes were just ugly to build
you can see it that the open sides sometime on top and some other are underneath

i used two paper stripes to combine them together
but i prefere if you are at this point, to draw youself some tabs
also i will edit the sheets a bit that you just have to add edge on edge

next problem
in the 3d model the pipes are going through the "containers"
but i can do this too ;)
i made some holes into them and just put them inside

p.s.
you should do this before you add the containers to the hip ;P

last picture
the final torso :aww:

p.s.s.
here you can see what i mean that it's actually not possible to move the chest
but that is no problem
the important thing is that i "could" do it if i want :D
Show
Add a Comment:
 
No comments have been added yet.