Shop Mobile More Submit  Join Login

Similar Deviations
New shot of Katy in the Huntress costume I made her.

For more of Katy, check out and Like her FB!
Katy Mor Modeling
Show
Add a Comment:
 
No comments have been added yet.

Another picture of the Huntress costume I made for the lovely AZ Huntress! Better pics to come!

Batgirl - AZ Batgirl
Black Canary- Ms Lessa
Show
Add a Comment:
 
No comments have been added yet.

Costume Construction:

The bodysuit it made from a custom pattern drafted by myself. The suit has a combination of modified princess seams and angled hip darts to shape the suit and belly window. The bodysuit is made from black and white metallic spandex. The bodysuit has built in leggings for the sake of 'modesty' and comfort.

The boots are boot-covers created over a pair of combat boots. I used wet look purple spandex for the base of the boot and ribbed a section under the knee for detailing and to help keep the boot up. The strapping and lower shoe guard are made from purple vinyl. The knee pads are highly modified children's knee guards which I ripped apart, rebuilt and then coated in a semi gloss glaze.

The belts and pouches are made from the same purple vinyl. I created my own pattern for the pouches and engineered my own design for the belts. My belt buckle is made from resin marbled in black and gold.

My arm guards are altered children shin guards which I've heat formed, painted and altered to fit my arms. My cape clasps are resin casted and painted with a metallic gold. The cape is made from a lightweight poly-satin and the same metallic white spandex used on the suit. The bottom of the cape is heat sealed to allow the cape to flow in the wind.

The mask is made from craft foam, heat & bond and purple wet look spandex. I also sewed elastic onto the temples of the mask to hold it on.
I created a paper mock-up of my face to get the spacing of the eyes, nose and jaw correct. Then I used the paper pattern to create a craftfoam mock-up to see how the heat forming would fit my face and to make sure craftfoam was the right material to use. I followed this up with cutting out a final copy of the mask from craftfoam, sewing on the elastic and applying heat and bond to the surface. I attached the wet look spandex to the heat and bond, then I cut off the excess fabric around the mask. I then heated the mask and molded it to my face.

-----------

Photo by: Joseph Chi Lin

Show
Add a Comment:
 
No comments have been added yet.

Costume Construction:

The bodysuit it made from a custom pattern drafted by myself. The suit has a combination of modified princess seams and angled hip darts to shape the suit and belly window. The bodysuit is made from black and white metallic spandex. The bodysuit has built in leggings for the sake of 'modesty' and comfort.

The boots are boot-covers created over a pair of combat boots. I used wet look purple spandex for the base of the boot and ribbed a section under the knee for detailing and to help keep the boot up. The strapping and lower shoe guard are made from purple vinyl. The knee pads are highly modified children's knee guards which I ripped apart, rebuilt and then coated in a semi gloss glaze.

The belts and pouches are made from the same purple vinyl. I created my own pattern for the pouches and engineered my own design for the belts. My belt buckle is made from resin marbled in black and gold.

My arm guards are altered children shin guards which I've heat formed, painted and altered to fit my arms. My cape clasps are resin casted and painted with a metallic gold. The cape is made from a lightweight poly-satin and the same metallic white spandex used on the suit. The bottom of the cape is heat sealed to allow the cape to flow in the wind.

The mask is made from craft foam, heat & bond and purple wet look spandex. I also sewed elastic onto the temples of the mask to hold it on.
I created a paper mock-up of my face to get the spacing of the eyes, nose and jaw correct. Then I used the paper pattern to create a craftfoam mock-up to see how the heat forming would fit my face and to make sure craftfoam was the right material to use. I followed this up with cutting out a final copy of the mask from craftfoam, sewing on the elastic and applying heat and bond to the surface. I attached the wet look spandex to the heat and bond, then I cut off the excess fabric around the mask. I then heated the mask and moulded it to my face.

-----------

Photo by: Kevin Chan

Show
Add a Comment:
 
No comments have been added yet.

****Follow me on Twitter!****
****Friend me on Facebook!****


Full length shot of Huntress that I wore at SDCC 2012!

Construction Notes
Body suit and leggings are made from a matte metallic spandex in black. white detail on the body suit is metallic spandex sewn directly on top. The belt, gloves, knee pads, pouches, and leg straps are all made of purple vinyl. Bonus, for having functional pouches to keep all my stuff in while at con! I couldn't find a purple that matched the vinyl I had so I found something close. It's a purple gabardine trimmed in white gabardine. While I love that it doesn't wrinkle in suitcases, it makes this costume SUPER hot. Oh well! The cape was the trickiest part of the costume and consists of a front, back and collar pieces. It zips up the back to get it on and off. As for the mask it was made of wonderflex and painted. Stays on with elastic. Wig is off of Ebay. Boots just had the soles painted.

--------
Costume made and worn by =WindoftheStars
Photo by ~MikeRollerson
Show
Add a Comment:
 
No comments have been added yet.

I wasn't lying when I said I was working on a Huntress costume! This particular version of Huntress has been on my dream list of costumes for a long time. I have a soft spot for the ridiculous belly window and booty shorts.

------------

Costume Construction:

The bodysuit it made from a custom pattern drafted by myself. The suit has a combination of modified princess seams and angled hip darts to shape the suit and belly window. The bodysuit is made from black and white metallic spandex. The bodysuit has built in leggings for the sake of 'modesty' and comfort.

The boots are boot-covers created over a pair of combat boots. I used wet look purple spandex for the base of the boot and ribbed a section under the knee for detailing and to help keep the boot up. The strapping and lower shoe guard are made from purple vinyl. The knee pads are highly modified children's knee guards which I ripped apart, rebuilt and then coated in a semi gloss glaze.

The belts and pouches are made from the same purple vinyl. I created my own pattern for the pouches and engineered my own design for the belts. My belt buckle is made from resin marbled in black and gold.

My arm guards are altered children shin guards which I've heat formed, painted and altered to fit my arms. My cape clasps are resin casted and painted with a metallic gold. The cape is made from a lightweight poly-satin and the same metallic white spandex used on the suit. The bottom of the cape is heat sealed to allow the cape to flow in the wind.

The mask is made from craft foam, heat & bond and purple wet look spandex. I also sewed elastic onto the temples of the mask to hold it on.
I created a paper mock-up of my face to get the spacing of the eyes, nose and jaw correct. Then I used the paper pattern to create a craftfoam mock-up to see how the heat forming would fit my face and to make sure craftfoam was the right material to use. I followed this up with cutting out a final copy of the mask from craftfoam, sewing on the elastic and applying heat and bond to the surface. I attached the wet look spandex to the heat and bond, then I cut off the excess fabric around the mask. I then heated the mask and moulded it to my face.


------------
Photo By: Carroll Kong

Show
Add a Comment:
 
No comments have been added yet.

My favorite thing about my Huntress costume is getting to wear combat boots, I'm comfortable and can climb ANYTHING I want.


Photo by: Kevin Chan

:
Show
Add a Comment:
 
No comments have been added yet.

San Diego Comic Con 2012 (7/13/12)
San Diego Convention Center

Credits
photographer: me
Huntress - :iconwindofthestars:

Comments:
From DC Comics

We'd decided to the the shoot outdoors but under one of the white tents that had set up. That way I'd have a plain background and we'd be not in direct sunlight. It still got hot for the both of us (though she's the one who was cooking faster), but we managed to get a lot of shots out of this shoot). Also had to thank her friends for suggesting some of the later poses, since my brain was obviously not impervious to the surrounding heat. ^^;

Full Gallery: [link]
Show
Add a Comment:
 
No comments have been added yet.

Made this costume for my friend for Phoenix Comic Con last this year. The vine was extremely fun to make and took on a life of its own. LOL

Photo taken by: Patrick Beahan
Show
Add a Comment:
 
No comments have been added yet.

I really wish I could take credit for this costume but alas I cannot, The entire costume was made for me by Heroes in Tights [link] who asked me to 'model' and help promoted them at Toronto Wizard World.

By god I'm super pale O.O... I need to get some sun

I can take credit for the tone of purple, the wig and my pistol bow though! Originally there was a colour mix up for the purple which was originally quite pink and there wasn't enough time to change to fabric, so I dyed the fabric to get a darker lavender which is consistent with the colour portrayed in most of the comic panels.
Overall I love this costume, especially since this version is Huntress at her peek. I planed on doing a Huntress costume eventually so it worked out perfectly!

photo by: Kevin Chan
[link]
Show
Add a Comment:
 
No comments have been added yet.