Shop Mobile More Submit  Join Login

Similar Deviations
*********** Yaya on Facebook [link] ***********
*********** Yaya on Twitter [link]


Thanks to Kevin Green for these shots taken at Wondercon 2011

Costume made and modeled by me

This costume is based on the Adam Hughes :iconadamhughes: covers for the Catwoman comics.
[link]
[link]
[link]

Selina is such a iconic character and he captured her so well that I wanted to pay tribute.

I started with a base black latex suit and made the gloves with the claws, hood with the catears, and goggles. I tried to find as accurate as boots as I could, and ordered a leather whip as well.

In the future I definitely would like to do a rooftop shoot with this costume, gosh the possibilities are near endless!

EDIT: Thank you so much for the Daily Deviation! I was so surprised when I woke up to find this. I also really appreciate all the nice comments and feedback. One thing about getting a DD is that inadvertently it comes with criticism as well. Overall I welcome criticism and constantly strive to improve on my costumes. And honestly most of you are saying far too nice things, thank you. But what I don't like is when people make assumptions about me and my work without taking the time to read the description, or research my portfolio at least a little bit. This is the first photo I've posted of this Catwoman costume, which was taken against a wall at a con and is meant to show off the costume. Nothing more. More photos of a variety are coming soon.
I think people sometimes forget that we are real human beings sweating inside these outfits, and there are outside conditions that impact the images we produce. Planning for an uninterrupted photo session is difficult and requires time, effort and sometimes money. We do our best to get some good shots at a convention when we're already dressed up, but the constant bombardment of attendees wanting photos of you, with you, with their kids, with their friends etc. can make doing a serious photoshoot difficult. I enjoy meeting people and taking photos with them, so I sometimes sacrifice a private photoshoot for socializing with the attendees.

All I'm trying to say it - have some common sense and think before you speak. I never go on DA to criticize anyone because I believe there are factors involved in producing each Deviation that are not known to me.

Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********
*********** Yaya on Twitter [link]


Last deviation of Catwoman until I do a new photoshoot! You can see the goggles' shape really well in the one on the right. It does swoop up! I also wanted to thank Mr. Adam Hughes for signing them. They are my prized possession now!

Thanks to Kevin Green for these shots taken at Wondercon 2011

Costume made and modeled by me

This costume is based on the Adam Hughes :iconadamhughes: covers for the Catwoman comics.
[link]
[link]
[link]

Selina is such a iconic character and he captured her so well that I wanted to pay tribute.

I started with a base black latex suit and made the gloves with the claws, hood with the catears, and goggles. I tried to find as accurate as boots as I could, and ordered a leather whip as well.

In the future I definitely would like to do a rooftop shoot with this costume, gosh the possibilities are near endless!

Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********

New photos of Catwoman! I love these shots by Judy :iconthedreamerworld:, thank you so so much!

Costume made and modeled by me

This costume is based on the Adam Hughes :iconadamhughes: covers for the Catwoman comics.
[link]
[link]
[link]

Selina is such a iconic character and he captured her so well that I wanted to pay tribute.

I upgraded my latex bodysuit by approaching the Latex Designer House Polymorphe, who crafted a gorgeous suit to my measurements. I made the rest of the accessories, including the gloves with the claws, cowl with the catears, and goggles. I tried to find as accurate as boots as I could, and upgraded my leather whip to a 12-plait 10-foot beauty.

The location is New York City, and that is indeed a window on a roof!

Other Deviations of this costume:


See more info and photos of this costume on my website: [link]
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********

New photos of Catwoman! I love these shots by Judy :iconthedreamerworld:, thank you so so much!

Costume made and modeled by me

This costume is based on the Adam Hughes :iconadamhughes: covers for the Catwoman comics.
[link]
[link]
[link]

Selina is such a iconic character and he captured her so well that I wanted to pay tribute.

I upgraded my latex bodysuit by approaching the Latex Designer House Polymorphe, who crafted a gorgeous suit to my measurements. I made the rest of the accessories, including the gloves with the claws, cowl with the catears, and goggles. I tried to find as accurate as boots as I could, and upgraded my leather whip to a 12-plait 10-foot beauty.

The location is New York City, and that is indeed a window on a roof!

Other Deviations of this costume:


See more info and photos of this costume on my website: [link]
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********
*********** Yaya on Twitter [link]


Character: Amber - "Sucker Punch"
Costume made by - Yaya Han
Photography by Kevin Knight
Model - Yaya Han

Thank you, Kevin Knight, for taking these shots at SDCC!

You can see the costume pretty well in these pics - I made it the same way they did it in the movie, which is by cutting up a Vietnam era pressure flight suit and altering it HEAVILY.
If you look at the images of the actual costume on display here: [link] On the right side of the hip there is a finished hole, through which an air hose is attached to the plane and on the inside of the flight suit there are rubber air bags sewn in that expand with air and compress the pilot's body parts so they won't pass out from all the flight maneuvers.
Brian was able to get his hands on such a flight suit for me and I spent hours seam ripping the inside air bags and the pressure tubes that followed the length of the arms, legs and back of the suit.
Then I chopped it in half and replaced the zipper, made the pants into chaps, lined them, and used the left over matching fabric to make the hat. I had to make my own pattern for the hat.
The gun/magazine holster and belt were the next to tackle, and I give many thanks to Kathy of GodSaveTheQueenFashions for helping me pick out the leathers and tools and showing me leather working techniques. I used a heavy veg tan leather hide and made my own pattern for the pieces, cut them out and punched stitching holes for hours. Then heavy duty snaps were added as well as D-rings. After making all the pieces, I hand dyed them black and shined them up. It took about a day and a half to make and assemble the whole get-up.
The gloves are neoprene and leather.
Last pieces to make were the panties, bra and choker, and thank God I found the right pleated trim. I altered a bra by adding the zipper and the trim, same with the panties. Add some fishnets and a lollipop and I was ready to kill zombie nazis!

I'll say that by the end of SDCC, I had eaten 6 lollipops and was pretty sick of them. Thinking of casting a fake lollipop, but then I'd have to put plastic in my mouth ugh.

Looking forward to more Sucker Punch timez with my ladies at Dragoncon!

Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********
*********** Yaya on Twitter [link]
Yaya Han signed Posters


Character: Amber - "Sucker Punch"
Costume made by - Yaya Han
Photography by Brian Boling
Model - Yaya Han

Thank you, Brian, for taking these shots at SDCC!

You can see the costume pretty well in these pics - I made it the same way they did it in the movie, which is by cutting up a Vietnam era pressure flight suit and altering it HEAVILY.
If you look at the images of the actual costume on display here: [link] On the right side of the hip there is a finished hole, through which an air hose is attached to the plane and on the inside of the flight suit there are rubber air bags sewn in that expand with air and compress the pilot's body parts so they won't pass out from all the flight maneuvers.
Brian was able to get his hands on such a flight suit for me and I spent hours seam ripping the inside air bags and the pressure tubes that followed the length of the arms, legs and back of the suit.
Then I chopped it in half and replaced the zipper, made the pants into chaps, lined them, and used the left over matching fabric to make the hat. I had to make my own pattern for the hat.
The gun/magazine holster and belt were the next to tackle, and I give many thanks to Kathy of GodSaveTheQueenFashions for helping me pick out the leathers and tools and showing me leather working techniques. I used a heavy veg tan leather hide and made my own pattern for the pieces, cut them out and punched stitching holes for hours. Then heavy duty snaps were added as well as D-rings. After making all the pieces, I hand dyed them black and shined them up. It took about a day and a half to make and assemble the whole get-up.
The gloves are neoprene and leather.
Last pieces to make were the panties, bra and choker, and thank God I found the right pleated trim. I altered a bra by adding the zipper and the trim, same with the panties. Add some fishnets and a lollipop and I was ready to kill zombie nazis!

I'll say that by the end of SDCC, I had eaten 6 lollipops and was pretty sick of them. Thinking of casting a fake lollipop, but then I'd have to put plastic in my mouth ugh.

Looking forward to more Sucker Punch timez with my ladies at Dragoncon!

Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********
Yaya Han signed Posters


New costume debut - Dragoncon 2011

This is a collaboration between Pit Viper Studios [link] and moi. I was approached by Len and Audrey several months ago with the idea of modeling a one-off set of Baroness armor for their prop studio as a way to promote their company and our mutual fandom love for GI Joe. I was honored to be considered! Since I had been planning on making Baroness at some point any way, it seemed like the perfect time to get to work.
Toby and Audrey sculpted the pieces, and Len, Kevin, John and the rest of the Pit Viper crew cast the amazing set of armor for me, made of fiberglass. It is surprisingly comfortable and sturdy to wear and I could move around easily. And it looks totally badass and protective!

I took on the responsibility to put the rest of the suit together. Looking at many many reference images of Anastasia (:iconadamhughes: and :icondiablo2003: amongst others), I decided to put my own spin on her signature bodysuit. My goal was for it to be more than just a spandex bodysuit, so I designed a two piece suit featuring seaming details and quilted sides down the arms and legs, as well as scalloped three-piece sections of leg armor. The material is a rubber coated 4-way stretch spandex, which I chose because I wanted the gloss-coated armor to stand out from the matte-finish suit and contrast each other. I made a pattern for the bodysuit and sewed it from scratch. The wig is a pretty lace front that was sleek and not too long, since I didn't want to cover up the armor too much. The glasses were a surprising bitch to find lol. You can't walk into an Optic store and buy a set of rims, they'd have to do an exam and fit non-prescription lenses in. And I didn't want to have lens-less rims! So after much searching I got these at a Dollar Store.. in Montreal, Canada lol.
The weapons were so much fun to pose with. I borrowed a big ass gun from :iconbeautifully-twisted: since she did Sweet Pea from Sucker Punch the day before. Thanks, babe! (We later on discovered that the scope is mounted backwards, oh well!) I had also brought a P-90 which would have looked cool but I couldn't carry more than 2 guns around. The hand gun is my Amber gun haha.

Honestly the only thing I'm somewhat missing is a belt. I debated for a while whether or not to have a belt because it will break up the stream-lined seams I so painstakingly put on the bodysuit.... then I got stuck in Germany for three days because of Hurricane Irene and lost that time to work on costumes for Dragoncon. So I said screw the belt. But after wearing the costume, I must say it would be nice to have someplace to put my room key/money/phone, so a belt will be made when I find the time!

Photos by Anna Fisher ([link])! Incredibly fast turn around and gorgeous shots, thank you, girl!

Check out Pit Viper Studio's work here! [link]
Photos from the Cobra's Finest meet coming soon. Thank you everyone for having me in your group!!


Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

Like Yaya on Facebook
Follow Yaya on Twitter
Yaya Han signed Posters


Eeeeeh! I am so excited about the sharing the images from the photoshoot I recently did with Bryan Humphrey! More coming soon!

Character: Catwoman from Arkham City (video game)
Costume made by: Yaya
Model: Yaya
Photography: Bryan Humphrey

How I made this:
This costume was made in 50 hours, but only takes 5 minutes to put on lol. To match the hexagon fabric in the video game, I had the pattern designed by my friend Jinyo and printed up at Fabric On Demand. The secondary fabric is a rubber coated spandex.
Cathy of :icongstqfashions: saved me hours of work by graciously letting me base my bodysuit off of the pattern she had made already for this same costume for a customer. I had to redesign most pieces of the pattern to fit my bodyshape and height, but it was nice to not have to make a full mock-up from scratch, and with my tight work schedule, I appreciated every second of time saved.
I sewed the costume entirely myself, as usual, making sure to triple-stitch the seams (100+ of them) and also top stitch all of them. I also made the matching accessories such as gloves/hood/ears/sculpted metal bits/altered boots etc.
I re-used the goggles from my other Catwoman costume because I kind of hate the design of the Arkham City goggles, and I already made perfectly usable Catwoman goggles before. :)
Show
Add a Comment:
 
No comments have been added yet.

*********** Yaya on Facebook [link] ***********
Yaya Han signed Posters


Character: Wonder Woman -DC Comic Ame-Comi Collectible Figure design
Costume made and modeled by me
Photo by Benny Lee (EmanonDesign) :iconbenny-lee:

I have more Dragoncon photos to share but am too excited about getting Wonder Woman studio shots back to not share at least one of them. Thank you, Benny, for these great photos! I really liked the intensity in this shot - as a character Wonder Woman would never go out without a fight and the Ame-Comi design arms her with sword and shield so I wanted to create a fighting stance pose. Undefeated!


Other Deviations of this costume:
Show
Add a Comment:
 
No comments have been added yet.

Like Yaya on Facebook
Follow Yaya on Twitter
Yaya Han signed Posters


Character: Catwoman from Arkham City (video game)
Costume made by: Yaya
Model: Yaya
Photography: Brian Boling
Tumbler: The Dark Knight screen-used car, thank you, WB, for letting me pose with it.
Location: San Diego Comic Con 2012

This is a preview shot for the new Catwoman costume I completed in time for SDCC. Forgive the crowd in the background, I took the chance to pose with the Tumbler when permission was granted!!
When I post closer-up photos of the costume, I will share the construction process in detail. For now, just know this costume was made in 50 hours, but only takes 5 minutes to put on lol. To match the hexagon fabric in the video game, I had the pattern designed by my friend Jinyo and printed up at Fabric On Demand. The secondary fabric is a rubber coated spandex.
Cathy of :icongstqfashions: saved me hours of work by graciously letting me base my bodysuit off of the pattern she had made already for this same costume for a customer. I had to redesign most pieces of the pattern to fit my bodyshape and height, but it was nice to not have to make a full mock-up from scratch, and with my tight work schedule, I appreciated every second of time saved.
I sewed the costume entirely myself, as usual, making sure to triple-stitch the seams (100+ of them) and also top stitch all of them. I also made the matching accessories such as gloves/hood/ears/sculpted metal bits/altered boots etc.
I re-used the goggles from my other Catwoman costume because I kind of hate the design of the Arkham City goggles, and I already made perfectly usable Catwoman goggles before. :)

More photos and write-up coming soon, also look out for my Journal entry Recap of SDCC!
Show
Add a Comment:
 
No comments have been added yet.