Deviant Login Shop  Join deviantART for FREE Take the Tour

Similar Deviations
again a part with a lot of pieces :aww:
the first five screenshots are again the pieces which are for the hip

i promissed that i make a few photos of this boosters
well, these are a bit more complex as the others but base on the same technique

first i cut them out and build the single rings
i also removed the tabs for the inside ring
quite useless for me
at the fourth photo you can see the final pieces
because the sheets are designed for colored cardboard paper there are no tabs for the bottom piece where the peak as to be attached on
so i just colored a little paper piece with black marker and glued it on top (you can see it at the left piece)

then i put some glue at the inside of the tube and put it on top of the inside ring
after it's dry, i add the peak
quite simple, if you know how it works ^^;

piece overview 1
as always, here are all pieces what you need for the hip

po2
again one of those problems when you work with normal paper
to combine this pieces i just add a little tab at the backside and cut two lines into the base piece

po3
this one took me really long to figure out
first i thought the smaller piece has to be attached to the hip base but that doesn't work
because the black flat pieces where all the parts has to be attached fit exactly to the hip base
so this was the only solution

i scratched the color where this pieces has to be combined

po4
lego is just boring against this :D

po5
and e viola
the final hip :meow:
Show
Add a Comment:
 
No comments have been added yet.

well, honestly, i don't know what i should write :confused:
maybe i didn't realized that i'm finally done with this model.

it takes a horrible long time to build and sometimes i was about to give up, but after more than two month (effective building time) i can share this pictures with you :)

Fazit:
the best decision was, to print the sheets on A3, because this model takes me to the limits and you should have a little bit more experience for this.
the most parts are quite easy, but some pieces are hard as hell.
you can see it in the "building process gallery"

specially the backpack was that part, that gives me more then one headache :D

but it was a challenge that I gladly accepted
because this model is really unique and definitely an eyecatcher in every shelf ore something else.

the guys from "Just Paper" did a great job on this and if they ever decide to create an other one, i would build it too ;)


IMPORTANT!!
permission for upload given through NCsoft
pls read this journal entry for more infos

the sheets are free and should remain so
pls download and use them only for personal use
otherwise i must remove them

Exteel & Sidewinder are trademarks & copyrights by NCsoft
Model created by Just Paper


to download the sheets


just click on download above ;)

-other shots-
Show
Add a Comment:
 
No comments have been added yet.

this is my pidove (mamepato) papercraft i have testbuild it for :iconsabi996:.
he was pretty easy to build only the paw was really hard! :(
you can download it on:[link]
Show
Add a Comment:
 
No comments have been added yet.

Prop updates will be posted at GS Props

I accidentally hit the sword against something at the con and it has to be repainted....I feel kinda horrible since it was pretty deep and it now has to be repainted the whole thing, bc of the clear coat.

Sword was mostly made by ~Dionysus80. The blade is made out of wood planks glued together with an aluminum rod in the middle. Shaped with a belt sander. The hilt is made out of styrene, MDF, and the guard is made from tow casted plastic pieces. ~Dionysus80 made one side, then we made a mold and casted the two sides to make the whole guard. The other hilt pieces are lathed and the end one contains the battery and switch. Painted with automotive paint.

Collar is made out of expanded pvc and styrene, finished off with automotive paint

Anime: Saint Seiya: The Lost Canvas
Character: Alone (Hades)
made by: :icondionysus80: and :iconmarikasan:





:star: Facebook :star: GS Props :star:
Show
Add a Comment:
 
No comments have been added yet.

:D another custom modelled 3D papercraft based on 2D sprites. This time it's Princess Zelda, and she was actually a lot harder (to build the 3D model of) than Link because of the lack of any side or back sprites. :( I had to make up my own, which was the first time I've ever attempted something like that. Anyway, I'm very happy with how it came out, and I actually like her better than Link! Unsure whether to do some more complicated sprites next, or some enemies from Loz (the NES game.) Maybe it should be Ganon next...

Some horrible words from Paperkraft.net:[link]
I'm sorry, but the original sprite looks like a troll. Just workin' with what I've got here. =P
Haters gonna hate. :)

Sorry about the awful pic, guys! Photography is NOT my forte. ;)
Download here: [link]
Show
Add a Comment:
 
No comments have been added yet.

it has been done
ladies and gentlemen
let me show you
"The Lich"
...
ayyyy :hooray:
i'm so happy and exited, this is defenitly one of my favorite models i've made so far
and it turned out so awesome
:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

and it really was about time that this is no done ^^;
i had this over a year now on my pc or rather where i ask :iconfirstkeeper: FirstKeeper for the original model
Lich.Presentation shot. by FirstKeeper

why this took so long?
just simple, i didn't had the knowledge at this point to edit 3d models in that way that it work
so i had to gain some experience first until i was ready to do this ;)

but the waiting time was worth
this is really an unique model which stands out of my normal fanart pieces
and just to clear this
even it looks like a model from WoW

this is NO fanart


this lich is designed as an OC
and because i just owe her this
i will handle it like that too
that means i will decline every suggestion from a fanart group
i hope you can understand this :)
i'm not gonna put this in some sort of suitcase
first i thought too that this something from DnD or an other RPG
but she made this model on her own
and she did just an awesome job :cuddle:
it was just a pleasure and also a honor that i had the chance to build this :w00t:

and if you say
but in this or that game there is also a lich
then you should take a look at wikipedia "what" a lich is ;)

ok, enough talking
let's see what you get here ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included
only the my from the orb

model description:
the model come on 44 pages with 301 pieces and is 45cm tall (without the pedestal)

the model is actually not hard but there are a lot tiny and special pieces
so i would say the difficult level is about 8/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)


to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore

some word to the bloggers



because this is a collab, you have to give credits to :iconfirstkeeper: FirstKeeper too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use her renders ore screenshot of it
except she allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

p.s.
sry for the bad photo quality
the conditions at the moment are very bad and i didn't understand the setting of the phone camera ^^;

other shots:
The Lich - b by Destro2kThe Lich - c by Destro2kThe Lich - d by Destro2kThe Lich - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

Soooooo I guess everyone was expecting this model... So... HERE IT IS... Ladies and Gentle: Ralts... by :iconz8-0:

Isn't it cute :3 Ralts evolves into Kirlia [link] at level 20.

coming up soon at paperpokes [link] . If u wanna see a cute family portrait, click here: [link]
Show
Add a Comment:
 
No comments have been added yet.

^_^
Show
Add a Comment:
 
No comments have been added yet.

These are the artworks that I spent the most time on, they took me probably 3 or 4 times to get right. IMO these are my best works so they are gonna priced at $27 in my etsy shop. These pieces are made to order so expect 1-3 days for completion, occasionally I may have leftovers from conventions in which case I will send them out immediately. They are made of ironed perler beads, they are pretty durable as long as you don't do stupid stuff with them like sit on them or intentionally try to make them snap. You can hang them on your wall or put magnets on the back of them as they are very light weight. I put a fishing line through each one of them so hanging them up will be a breeze.

Once you make your order, contact me so I know which one you want via email or PM.

All these characters are referenced from AbyssWolf's Card Saga Wars

Starting from the top left..

Ichigo, Sephiroth, Cloud
Morrigan, Link, Rikku, Dante
Show
Add a Comment:
 
No comments have been added yet.