Shop Mobile More Submit  Join Login

Similar Deviations
Odin is a OOAK (one of a kind) handmade sculpture. He was made from polymer clay over wire and foil. He is a fjord pony unicorn. He has brown resin eyes and tibetan lamb fur hair.

Odin was really fun and challenging to make. Square type poses are always harder because anatomy flaws are so much more obvious, but I think he turned out well. If I have to be honest, I think a fjord would have a longer face and back, but I like him nonetheless.

He took about 6+ hours to paint, most of which was repainting the body to be a good dun colour. I love his face, as you can probably tell by the masses of face photos I have uploaded.

Odin is about 8 inches tall to the tip of his horn. He was a commission/ trade from someone on another forum (same person who commissioned Storm)
Show
Add a Comment:
 
No comments have been added yet.

edit for a new photo! :)

Storm is a OOAK (one of a kind) gypsy vanner unicorn stallion.

Storm was sculpted from polymer clay over wire and foil, and was completely handmade from scratch. He was painted in acrylics and is slightly sparkly. He has light blue resin eyes, and his hair and feathers are tibetan lamb fur.

Storm is about 8 inches tall to the tip of his horn. He has silver horn and hooves.

Storm was a commission/ trade from someone on another forum. Sculptures this size are $120+shipping in case anyone was wondering.
Show
Add a Comment:
 
No comments have been added yet.

OOAK (one of a kind) polymer clay sculpture. Made entirely by hand over a wire and foil armature. The tack was made from clay, ribbon, small jewels, and wire. The horse and tack were painted in acrylics and are quite irridescent.

Companion is a commission I did. The commissioner wanted a character from the Mercedes Lackey series (I think Arrows of the Queen is one of them). I had never heard of these books before, but I think I might have to read them now! :)

Companion is about 7 inches tall to the ears. Her hair is tibetan lamb fur. She was a lot of fun to make, especially the tack. She's been in the works for a long time, I'm glad I finally finished her! She is going to live with "Golden Dawn".
Show
Add a Comment:
 
No comments have been added yet.

Cynosure is a OOAK (one of a kind) unicorn sculpture.

Cynosure is completely hand made from polymer clay over wire and foil. He is about 10.5 inches tall from base to horn tip, and 5 inches long from chest to bum.

Cynosure is a lovely silver grulla with light dappling. He was painted in acrylics and has purple resin eyes. He was lightly glazed in a pearly finish so is literally "silver" as well.

His hair is mohair and tibetan lamb fur. His horn and hooves are brown with natural striping.

Cynosure is pegged onto his base, and is removable. The base is made from polymer clay with moss, flowers, and pearlescent pigment.

Cynosure is for sale on etsy!
Etsy: [link]

In addition I have a video of Cynosure here: [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.

OOAK (one of a kind) friesian sculpture named Abyss.

Abyss is about 11 or 12 inches tall to the tip of his horn. He was made from scratch from super sculpey over wire and foil. He has inset purple resin eyes, and his hair is tibetan lamb fur.

I've made a few friesians before but it was a new challenge to do a rearing one. Actually I haven't done a rearing horse in a while so this was fun.

He is not for sale, he was a trade/ commission from someone on another forum.
Show
Add a Comment:
 
No comments have been added yet.

Cursive is a OOAK (one of a kind) unicorn sculpture. He was made from polymer clays over tin foil and wire. He has green resin eyes, and mohair for his mane and tail.

He is 6.5 inches tall to the crest of his neck. He is slightly smaller than my other recent unicorns.

He is meant to be an andalusian type. Painted in acrylics to a dapple grey with gold horn and hooves.

My main issue with this guy is that his belly should be a lot bigger since his eck and haunches are so thick. I have a few issues with the anatomy of his back legs, but overall I really like him.

I bought all the mohair completely raw, and it took me over 2 hours just to clean the portion I used for him. But it is beautiful now, no hay or bugs or goat stink to be found! :)

He will be for sale on etsy (or maybe ebay, I haven't sold on there in ages) but not until I get back from our road trip. (don't want stuff waiting to ship while I'm away.) So around november 12.
Show
Add a Comment:
 
No comments have been added yet.

Cursive is a OOAK (one of a kind) unicorn sculpture. He was made from polymer clays over tin foil and wire. He has green resin eyes, and mohair for his mane and tail.

He is 6.5 inches tall to the crest of his neck. He is slightly smaller than my other recent unicorns.

He is meant to be an andalusian type. Painted in acrylics to a dapple grey with gold horn and hooves.

My main issue with this guy is that his belly should be a lot bigger since his eck and haunches are so thick. I have a few issues with the anatomy of his back legs, but overall I really like him.

I bought all the mohair completely raw, and it took me over 2 hours just to clean the portion I used for him. But it is beautiful now, no hay or bugs or goat stink to be found! :)

He will be for sale on etsy (or maybe ebay, I haven't sold on there in ages) but not until I get back from our road trip. (don't want stuff waiting to ship while I'm away.) So around november 12.
Show
Add a Comment:
 
No comments have been added yet.

Autumn Requiem, or just "Requiem" the palomino saddlebred type unicorn. She is a ooak (one of a kind) fantasy sculpture, handmade from polymer clay over wire and foil. She is painted in acrylics, has inset resin eyes, and tibetan lamb fur hair.

Requiem is about 6.5 inches long from chest to bum and about 9 inches tall. Her eyes are emerald coloured.

She was a commission/ trade for someone on another forum. Of everything I've ever made, she's probably only the third one that I've actually been a bit sad to let go. I did end up getting lots of photos of her though. :)

Thanks for looking!
Follow me on facebook: [link]
Website: [link]
Show
Add a Comment:
 
No comments have been added yet.

Aptitude is a unicorn sculpture, made from polymer clay over wire and foil.

He is a leopard appaloosa arabian/ gypsy vanner cross. I don't think even the most talented of krazy kolor breeders could make one like this.

Anyway Aptitude stands 9 inches tall to the tip of his horn. He has green resin eyes ad tibetan lamb fur hair. I am likely going to put him on etsy but I do really like him and sort of want to keep him.

Anatomically I don't like him too much, I just like the color.

owned by ~wylf
Show
Add a Comment:
 
No comments have been added yet.

Cacique, the OOAK (one of a kind) dapple grey arabian unicorn mare.

Cacique (KA-seek)is about 6 inches long, from the end of her tail to her chest. From the ground to the very top of her horn, she stands about 8.5 inches tall. She is completely hand-made, with no moulds used or taken, and will never be produced again. She is a true one of a kind creation, made from a blend of polymer clay over a sturdy wire and tin foil armature. Cacique has been painted in acrylics to an iridescent dapple grey. Her eyes are yellowish green, inset, and made from resin. Her mane and tail are a mohair blend and are very soft.

She was fun to make. Took me ages to paint, dapples, ugh. She has a lot of personality =P

:star:Cacique was a side project and is for sale! She is on ebay right now, with the bidding starting at just 99 cents with free shipping. Please have a look! :
[link]

Follow me in other places:
Website: [link]
Facebook: [link]

Thanks for looking!
Show
Add a Comment:
 
No comments have been added yet.