Shop Mobile More Submit  Join Login

Similar Deviations
Starting from 25th result Go to first result
The mech itself isn't modified that much, mostly because I love its design and I didn't want to spoil that.

- Kitbashed/scratchbuilt main weapon (railgun)
- Scribed additional panel lines
- Used IC sockets to detail up the thrusters
- Custom paintjob
- Scratchbuilt diorama base
Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee: :hooray:

should i say something more :D
for all who followed me the last time
you can imagine how happy i am, that this gigantic project is finally done
three months (pure building time) of work are over
it was hard, it was frustrating but all in one
it was just worth :aww:

seeing her standing on my desk is just a satisfaction for all the work i put in
quite every edge is recolored to hide the white spots
i put so much soul into this project that i believe
a bit more and this model would jump right from my desk :D

but enough talking ;P
let's see what you will get here

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need again the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the model in the way you want :)

the package also contains the original textures

model description:
the model come on 52 pages with 520 pieces and is 60cm tall

i have to say this too
this model is hard
really hard, believe me
rate 10/10
you have to improvise a lot, so think two times if you really wanna build it :)

this time i wrote a lot of footnotes
more then usual
read them closely and you should have no problems

also
you should take a look at the building process gallery of the big sister
there are a few parts where i explain how this and that is working

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore




some word to the bloggers



you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!




and trust me, i search for my stuff ;)

feel also free to write a critique :)

other shots:
BioShock 2 - Bigsister - b by Destro2kBioShock 2 - Bigsister - c by Destro2kBioShock 2 - Bigsister - d by Destro2kBioShock 2 - Bigsister - e by Destro2kBioShock 2 - Bigsister - f by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

Fan Box art of Gundam Rasiel, my number 1 favorite gundam. The background honestly don't really match and still badly drawn, but the setting is the place where Hixar fought Besides Pain (this is a name) in 1.5 Gundam

Gundam material is owned by Bandai & Sunrise and Gundam Rasiel is originally designed by Takayuki Yanase.
Show
Add a Comment:
 
No comments have been added yet.

A standard IWSP pose with shield/gattling gun.
Show
Add a Comment:
 
No comments have been added yet.

Master Grade RX-0 Gundam Unicorn
Full Pscycho Frame Prototype Mobile Suit

and here's Sinanju [link]
Show
Add a Comment:
 
No comments have been added yet.

:iconvictorydanceplz: :icondweebdanceplz: :iconcarameldansenplz:

finally done
oh man, what a night :aww:
i wrote in the last journal entry that i had the feeling that i'm stuck on this
but after the entry it went into the opposite and the work goes on and on.

i doesn't took any other photos of the build because it would take more then i expected
at the end i had all parts assembled with the others
and i never cursed/sweared more then at this one :D

the only advice what i can give you is to build this very careful
start with the two front part, add this little pieces (on the same page) add the disc and curles/shells/screws/spiral flames ( :P ) and front legs
end with the tail and the last part should be the right rear leg
that's the way i build it.

again i must put some weight into one leg, beause of the tail and the sword, the model falls over.
so put something into the rear right leg before you close it.

fazit:
one of the hardest models that i had, but only because of the pieces.
there are brutal unnecessary complicated

however i'm happy that I decided to build it
it's really an awesome model
but never again :D

for download the model
click here

-edit-
1300 views and 130 faves after one week :wow:
you are nuts :D

thx to all for the responce and faves :heart:
Show
Add a Comment:
 
No comments have been added yet.

Another photo of the Shin Musha gundam from the SMASH! anime convention.
Show
Add a Comment:
 
No comments have been added yet.

again a part with a lot of pieces :aww:
the first five screenshots are again the pieces which are for the hip

i promissed that i make a few photos of this boosters
well, these are a bit more complex as the others but base on the same technique

first i cut them out and build the single rings
i also removed the tabs for the inside ring
quite useless for me
at the fourth photo you can see the final pieces
because the sheets are designed for colored cardboard paper there are no tabs for the bottom piece where the peak as to be attached on
so i just colored a little paper piece with black marker and glued it on top (you can see it at the left piece)

then i put some glue at the inside of the tube and put it on top of the inside ring
after it's dry, i add the peak
quite simple, if you know how it works ^^;

piece overview 1
as always, here are all pieces what you need for the hip

po2
again one of those problems when you work with normal paper
to combine this pieces i just add a little tab at the backside and cut two lines into the base piece

po3
this one took me really long to figure out
first i thought the smaller piece has to be attached to the hip base but that doesn't work
because the black flat pieces where all the parts has to be attached fit exactly to the hip base
so this was the only solution

i scratched the color where this pieces has to be combined

po4
lego is just boring against this :D

po5
and e viola
the final hip :meow:
Show
Add a Comment:
 
No comments have been added yet.

Real Grade 1/144
RX-78-2
MS-06S Zaku II
Show
Add a Comment:
 
No comments have been added yet.

Finally after 4 months of work the PG Zaku was finally completed. The main high light for this build was to try out metallic red high gloss finishing, did not really came out as expected as most of the Red area was not so consistent due to my lack of experience in handling airbrush, some of the parts especially the scratch build leg was repainted around 4 to 5 times due to the unsatisfied result, which lead me to invest getting a better airbrush hand piece.

For this build i have scratch build the back pack and leg armor like the Zaku High mobility type, and scratch build a Gouf type gatling gun on the left arm.

Overall i am happy the build are finally over, now i can move on and work on other things.

This baby was also submitted to Malaysia Mid year competition which is going on now.

Here are some WIP progress
[link]
Show
Add a Comment:
 
No comments have been added yet.