Shop Mobile More Submit  Join Login

Similar Deviations
well, honestly, i don't know what i should write :confused:
maybe i didn't realized that i'm finally done with this model.

it takes a horrible long time to build and sometimes i was about to give up, but after more than two month (effective building time) i can share this pictures with you :)

Fazit:
the best decision was, to print the sheets on A3, because this model takes me to the limits and you should have a little bit more experience for this.
the most parts are quite easy, but some pieces are hard as hell.
you can see it in the "building process gallery"

specially the backpack was that part, that gives me more then one headache :D

but it was a challenge that I gladly accepted
because this model is really unique and definitely an eyecatcher in every shelf ore something else.

the guys from "Just Paper" did a great job on this and if they ever decide to create an other one, i would build it too ;)


IMPORTANT!!
permission for upload given through NCsoft
pls read this journal entry for more infos

the sheets are free and should remain so
pls download and use them only for personal use
otherwise i must remove them

Exteel & Sidewinder are trademarks & copyrights by NCsoft
Model created by Just Paper


to download the sheets


just click on download above ;)

-other shots-
Show
Add a Comment:
 
No comments have been added yet.

and the next awesome model is done
:iconvictorydanceplz: :hooray: :icondweebdanceplz: :iconcarameldansenplz: :happybounce: :squee:

that's the reason why i just love this shit so much :D
and i just knew it would be cool :dance:

as i saw this model for, well, meanwhile also over a year ago ^^;
i just had to ask :iconsanat49: sanat49 for it
and i'm very thankfull and proud that he spend his original mesh for a papercraft project :huggle:
Crock by sanat49
the cool thing about this model is, that it's an entry for the pre-DominanceWar V competition, where i'm also a huge fan of :la:
what made this model, not the first Dominance War Papercraft, but the first downloadable (ironic hint to an other crafter ;P ) and hopefully definetly not my last ;)
...
but that's up to the 3d designer ;)


ok now, back to the model
the last steps, where you have to combine all parts will be exhausting
specially for the big shoulder armor pieces
there is not many space for glue or failures so be patience
test it out first where you can attach the pieces

also you have to put some weight into the rear leg or maybe both
maybe you noticed also that i attach the model a bit displaced at the pedestal
i had to do this because of the weight ratio
it's a lot testing and trying
so don't hurry ;)

file description:
the file contains as always three pdo files
one with texture and folding lines
one with texture and without folding lines
and one white version with folding lines

so you need the Pepakura Viewer what you can get "here"

all three pdo's are not protected
so if you have the Designer, you can edit the sheets in the way you want :)

the original texture is NOT included

model description:
the model come on 27 pages with 290 pieces and is 30cm tall

the model is actually not hard but the mouth take a bit more work as i thought
also the first three rings of the arms
the skulls and bones of the pedestal are very small but it's up to you if you wanna build them
i removed the lower site of the pedestal, it is too big for one page
but just glue the whole thing at a blank sheet and you have the same effect ;)

difficult level is about 7/10
if you have any trouble, feel free to ask me or/and take a look at the "building process gallery" where i explain how this and that is working :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore


some words to the bloggers




because this is a collab, you have to give credits to :iconsanat49: sanat49 too!
otherwise i can't allow it to write a blog entry

you have the permission to use my photos
you DON'T have the permission to use his renders ore screenshot of it
except he allow it

this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)


other shots:
Crock - b by Destro2kCrock - c by Destro2kCrock - d by Destro2kCrock - e by Destro2k
Show
Add a Comment:
 
No comments have been added yet.

Exia Ignition Mode: mine
Space background: Tozzie
[link]
Show
Add a Comment:
 
No comments have been added yet.

me (the indecency) and Link (the papercraft XP) .. . after that more months y finish!
now i will make the sword and the shield :3

and. .. thanks haywan . .. for make the pattern :3
Show
Add a Comment:
 
No comments have been added yet.

here we go
finally done :icontardboogieplz: :iconvictorydanceplz: :icondweebdanceplz:

man, this thing took just freaking long :faint:
when i imagine that the plan was, to build this in my three weeks vacation (last year :D ) and meanwhile a half year is gone since i started the boosterpack :D

ok, i had a few breaks, one with Renamon and a few others
so the pure building time was about two months
but also a long time :aww:

i have to say that i don't have any clue about Gundam Wing/00/Zero ore whatever which series is called
i know about the Gundams and love the mecha design (specially this one because of the wings) but never saw one part so don't bother about the name ;)


ah, big mechas with wings
i just love this shit :la:


even the sheets where not the best (they are very pixelized)
i'm totally pleased with the result
but during the building and right now i can say, it's definitely not a starter model
i had to modify a lot of stuff and quite every blue and grey edge is recolored to hide the folding lines
but all over is was pure fun :meow:
and...
surely not my last Gundam model ;)
the next one is allready planned

what's left to say
ah right :)
you can download the sheets here
also i wanna refer you to my building process gallery
just if you may stuck ;)

-other shots-


and a little special one here ;)
Show
Add a Comment:
 
No comments have been added yet.

The Lightcycle from Tron! This was the last complicated papercraft I assembled with normal paper, instead of cardstock.

You can find the creator's page here.
Show
Add a Comment:
 
No comments have been added yet.

my papercraft corellian corvette from venezuela! i made it in 3 days ^^
Show
Add a Comment:
 
No comments have been added yet.

Damn!
what a project :faint:
not because of the model itself
it is not very hard
more because of the sidework of the "Papercraft Tutorial" where is use this model for ^^;

to build this model and more to show you how i build it, make this model to something very special :meow:
and i hope you will enjoy building Gomamon as much as i did :dance:

About the Model:
the model comes on 10 pages, with 117 pieces and is about 20cm high

the sheets don't contain the hair
even it was a pain in the ass to peel all the wool in the right direction, is was quite funny (and a huge mess :D )
but trust me and you can see it in the Tutorial
to build all this triangles, i guess it wouldn't make fun :aww:

in my case i use colored sheep wool to build the hair, but you can also use paper, cardboard, plush, felt or whatever
it's hair, it don't look always the same ;P

About the Package:
The download package contains as always
three pdo files
one with folding lines and texture (lined)
one without folding lines and texture (lineless)
and one white with folding lines (white)

also the same as Adobe Reader PDF's
and also the original textures


if you have any problems ore questions
feel free to ask :)

to download the model
click on the download button on the right side
you can thank dA for, that i can't write the direct link anymore



some word to the bloggers




you have the permission to use my photos
this model is a Deviantart only download
so do not upload this model somewhere else
and the most important thing

this model is free and should it be
so let it be!





and trust me, i search for my stuff ;)

feel also free to write a critique :)
Show
Add a Comment:
 
No comments have been added yet.

MG-RX2 Pattern vs GK-0 Pattern!

scratchbuilt with PVC & Styrene w/ Mr. Hobby paints

commissioned unit for :iconcvphased:

NOTES:

MG-RX2
-13.5 cm tall
-33 points of articulation
-Movable jaw
-Movable Radome
-Movable Radome fins
-Movable FE Laser (up/down, 360 deg. horizontal rotation)
-Movable toe spikes
-Extending lower legs w/ simulated hydraulic rams
-Ball-jointed neck (base of head)
-Ball-jointed feet
-Ball jointed Railgun & Radome
-Ball-jointed side armor
-Dual ball-jointed hips
-Collapsible & swiveling knees
-Movable spine
-Double-jointed heels

GK-0
-1 inch tall
-Support stand


Metal Gear, Metal Gear Rex, Gekko belong to Konami Digital Entertainment, Yoji Shinkawa & Hideo Kojima.
Show
Add a Comment:
 
No comments have been added yet.