Deviant Login Shop
 Join deviantART for FREE Take the Tour

Similar Deviations
Assembled Image

PePaKuRa PDO's




If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

So, here they are: models for the dA llama badges!

To start with, I am less than 100% satisfied with how the Ninja Llama turned out. I'm not disgusted with it, but of the lot, it's the one I think could really use some additional work. There was no real easy way to make the mask fit over the head, so you get what you see... But whatever, at this point, I'm just ready to be done with this project.

As I stated in the W.I.P. picture, all of the pieces are removable, so you can mix and match as you see fit. There are four different llama base models; the regular, albino, golden, and rainbow. All additional ranks are simply their accompanying accessories.

The base model llama comes out to 3.5" (9cm) long, 1.5" (4cm) wide, and 4.5" (11.5cm) high, obviously ranging with accessories (the tallest coming to 5.5" (14cm)).

I've gotta say though, as silly as the llama badges were at first glance, they do seem to be helping people get more exposure. Not that I keep track, but looking at how many watchers I typically get a month, I've seen upwards of three times more since April Fool's Day (when the llama badges "joke" started); not to mention the new artists I've found and now watch.

For the moment, the sunglasses are not included. While I was modeling everything else, I did attempt them, but I could never get them to the point where I was happy with them. They just didn't stretch out nicely over the nose.

Final thoughts: the paper Golden Llama was much easier to achieve than the digital one (which still eludes me by ~1300 ~1000 ~450! Golden Llama Achieved!)



Also! Although people claim the Rainbow Llama badge is a real one, I've yet to see anyone with it.



Double Also! The PDO deviation has become a Daily Deviation! :D





PDF of Pieces

PePaKuRa PDO's







.=-=Difficulty-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
=-=-=-=-=-=Rating-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-=. . . . . . . . . . . . . . . . . . . . . . . . . . . . -=
=- . . . . . . . . . . . . . . . . . . . . . . . . . . . .=-
-=. . .Piece . . Not. . .Getting. . . . . . . .Holy. . -=
=- . .o' Cake . .Bad. . . There. . . Gahh. . .Crap!. .=-
-=. . . .1--------2--------3--------4--------5. . . -=
=- . . . . . . . . /\. . . . . . . . . . . . . . . . . . .=-
-= . . . . . . . . . . . . . . . . . . . . . . . . . . . .-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
'=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'






Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

This is uber yummy! <3 if you want to see pictures of the making process and finished products go to [link]=page_recipeview&uid=210 Recipe goes to Dona. I did not make this recipe.


//EDIT//

Okay the link above doesn't work.. *stupid emoticons* so this the the person's blog who did the recipe ==>>> [link] Go look at her site because she is an awesome cook with yummy recipes =D Oh I uploaded the picture in my scraps. =] I take no credit for such a pretty picture! [link]
Show
Add a Comment:
 
No comments have been added yet.

Capitalizing on the current trend - and because I love it too... HERE IS A LLAMA AVATAR!

For free use, please read my rules of use if you want to use it: [link]

If you want to use it in a stamp or something, just let me know first!

:llama: :llama: :llama: :llama: :llama: :llama: :llama: :llama:

Llama LOVE!
PS- if you send me a Llama, I will send you one back ;D
:iconplusllamaplz:

Image (c) RoseSagae
Show
Add a Comment:
 
No comments have been added yet.

Henna Project.
Show
Add a Comment:
 
No comments have been added yet.

ATTENTION ALL VIEWERS COMING TO SEE THIS DUE TO ITS DD STATUS:
The "Assembled Image" group shot looks much nicer! Don't forget to check that out!




Assembled Image

PDF of Pieces




If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

> Assembled Image

> PePaKuRa PDO file


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

I also realize that I neglected to draw in the marks where you should cut on each side to insert the wings. You can guestimate where to put 'em, I just went in the center. Glue the tabs on the outer edges of the wings to the inside of the body.


Assembled picture


If you can't figure out how to download this file, refer to this One-Step How-To Guide




Have you built this or one of my other models? Feel free to let me know how hard you thought they were!
Show
Add a Comment:
 
No comments have been added yet.

Done!

[link]



~ ^ ~ ^ ~ ^ ~ ^ ~ ^ ~ ^ ~ ^ ~

Here's a little something I've been doing on and off for the past few days: models for the dA llama badges!

I plan on making all the "costume items" for the different levels removable; i.e. once you make the regular Llama, you can turn it into a Super Llama, Ninja Llama, Fancy Llama, Spartan Llama, King Llama or Wizard Llama by swapping out the different capes and accessories. The two Albinos, the Golden and Rainbow Llamas however will need to be completely built on their own (for obvious reasons).

Of course, upon posting this I realized that all of my models are mirror backwards compared to the original icons... Yea, easy enough fix, just a nuisance...
I can't believe I didn't even see that when compiling the screenshots for this picture...

I don't think the Albinos are white enough... I'll have to touch up their textures a bit more.
The gold one was the most fun to texture; it's so simple, and its got those nice big "shiny" waves!

Also, I'm not entirely convinced the rainbow llama is a legitimate level. Some people say it is, but I've yet to see anyone with it.

Double also, only 234 40 more till I get the Wizard Llama! ACHIEVED!

Minor Update: 6/19
Added the Bowtie and fixed the Wizard a little, made his cloak longer and shifted the colors to be a little bluer

Major Update: 6/22
Pretty much finished the remaining llamas, went through and made little touch-ups to the others (I'm much happier with the Albinos), and mirrored everything to match the icons (they were all backwards before). I'm still not sure what I'm going to do for the sunglasses, I'd have to stretch each eye really far apart and hold them together with a very wide and skinny bridge... which I could do, it'd just look weird. I think I'll just omit it for now. Also, I'm not sure what to do for the Spartan's beard; originally I was planning on the accessories being permanent, i.e. just gluing the beard on the face, but now that I'm going for a mix-and-match approach I'll probably have to make a thin piece to wrap over the top of the head... I'll sleep on it.
Also, I just realized I forgot to texture the Ninja's sword...
Show
Add a Comment:
 
No comments have been added yet.

Bit to much to eat..

Program:Photoshop CS5
Time: 15Mins

*Imma bit lazy so im gonna say thanks for all the faves here*
Show
Add a Comment:
 
No comments have been added yet.