I found the original photo of this manip. enchanting. I thought about it and I knew I wanted to mess with it. So I did! Didn't want to make it too abstract, so I just played with little things on it. Yaya has practically black eyes, so makeing them lighter was a challenge, but fun! Yaya is my favorite person to make manips. of, so whenever I see a picture of her that catches my eye, it's fun to play with it.
Model: Yaya Han | [link] Photographer: Elvis Thompson
A lovely, beautiful gentlewoman. On the outside, she seems weak and fragile, but Tomoe is the only one strong enough to be a sheath for the Battousai's murderous sword. She is the only one who can bring peace to his heart.
Gothy_Dark as Yukishiro Tomoe Photography by Steven Editing by me
Rurouni Kenshin belongs to Nobuhiro Watsuki.
Kenshin: Wandering Swordsman [link] Kenshin: The Sakabatou [link] Yahiko: The Young Swordsman [link] Kaoru: The Sword that protects [link] Tsubame: The lovely waitress [link] Tsubame: The Smile [link] Megumi: The Cunning Physician [link] Kaoru: Beauty [link] Kaoru: Watching with a smile [link] Kaoru: Peaceful Fighter [link] Sanosuke: The Evil [link] Sanosuke: The Fistfighter [link] Kenshin and Kaoru: Fight [link] Omake: The ladies can fight [link] Yahiko: Deep in thought [link] Kenshin: Contemplating the past [link] RK: Ready to fight [link]
Top Row: Esmeralda (The Hunchback of Notre-Dame), Snow White (Snow White and the Seven Dwarfs), Cinderella (Cinderella), Princess Eilonwy (The Black Cauldron), Princess Aurora (AKA Briar Rose; Sleeping Beauty)[Blue and Pink versions] (Sleeping Beauty), Jane [Bun and Long hair versions] (Tarzan).
Second Row:Belle (Beauty and the Beast), Mulan (Mulan), Ariel (The Little Mermaid), Pocahontas (Pocahontas), Tinkerbell (Peter Pan), Tiana (Princess and the Frog), Tigerlily (Peter Pan), Bo Peep (Toy Story).
Last Row: Jasmine (Aladdin), Meg (AKA Megara) (Hercules), Wendy Darling (Peter Pan), Alice (Alice in Wonderland), Shanti (The Jungle Book), Kida (Atlantis), Mira Nova [Purple and White versions](Buzz Lightyear of Star Command: The Adventure Begins), the Blue Fairy (Pinocchio).
So this was fun. I have no idea how Mira's shoes look like in the purple outfit, so when I watch the movie again I'll fix that. I hated doing Jasmine. I never really liked her anyways. Her pants were difficult.
Sooooooooo I was going through a TON of old photos, mostly on my photobucket and I came across a few of my crown WAAAAAY back in the day. I made all of these out of Sculpey (sculpey=) hehe the back of the crown looks like a kunai XDDDD
Just a basic tutorial on how I use my chisel to carve wood, and in this case, the guard for one of my katanas. For any carving I do, it also helps to have a utility knife/carving knife and a pencil/pen. However, this whole tutorial can be accomplished with just a chisel.
I've already carved out one side of the guard here, just to see what we are going for. It is simply a basic recess to give the piece that 3-D quality and shadow. I'm using mahogany, but everything here applys for all types of wood, just keep in mind that the more pronounced the grain of the wood, the easier it is to catch that grain and ruin your work.
The first main step is simply to draw out what you plan to carve out. This first step may be most important, and can save lots of mistakes later. Then the best stategy way I've found is to take a knife and cut that line as well. This creates a buffer of sorts so that when you go to the chisel, you don't catch the grain and go right through the edge you're trying to make. This is very important to do, I can tell you just how frustrating it is to put in the four hours of work and then ruin it with an enthusiastic thrust with the chisel.
Next, start to chisel. Do shallow cuts, and go deeper as you go along. Again, caution is the way to go with this. And make sure your chisel is sharp, that way you don't have to push as hard. I just use my hand, not a mallet, I like the control I have that way. But it is more of a struggle that way as well. Just dig into the wood, and then just work the chisel, kind of prying the wood up as you go. Do this until you get as deep as you'd like, or until you are all the way through if that is what you want.
Now another thing to pay attention to is the curves on this one, and also the sharp corners. Because you want to go either perpindicular or parallel to your lines, you have to alter your game plan a little, and maybe take some risks. It is very important to have cut your lines well in these areas, for the reasons mentioned earlier. Makes your job so much easier when dealing with both these problems. Keeping this in mind, you can work your way around pretty well.
Once you have it all rough cut out, you probably want to finish it up a little, make your surfaces a little smoother. To do this, you can lightly chisel the surface, just to flatten things out, or scrape the surface with the chisel, to do the same thing. Then, you can sand it as well, if the surface allows for that. but you should probably sand the edges of the raised area to clean it up a little. Now, in terms of damage control, it is likely that you will either cut what you don't want out of the wood, or out of your finger (note the bandage on my finger). So band aids are good, and glue is good too. If you cut out a chunk, save it. That way its the same wood, and you don't have to worry about using wood filler to replace it. Just glue that piece back in.
That pretty much does it. If there is any way to make this better, easier to read, or if it needs more/better pictures, please please please let me know so I can make it better!
Cinderella from the Disney Movie Classic Cinderella
Again, sorry for the wait. =/
Magic Kindgom Disney World Orlando, Florida
Copyright Caitrin Anneliese - Respect Copyrights. Please don't steal, repost, sell, or alter this photo in any way or form without my written and expressed permission. If you use this photo in any way without my, Caitrin Anneliese, permission, serious legal action will be taken against you.